GE RM24926 Bedienungsanleitung

Universal Remote

Instruction Manual

Control Remoto Universal

Manual de Instrucciones

RM24926

Congratulations on your purchase of a 6 function

Universal Remote Control. This remote is one of the

most easy to use remote controls available today.

Now juggling multiple remote controls is a thing of

the past! Your Universal Remote controls up to six

devices, including the most popular brands of TV, VCR,

DVD, CBL, and SAT. It is easy to use, easy to program,

and it gives you total control—at the touch of your

ﬁngertips!

Note: Some functions from your original remote may

not be controlled by this remote. Use the original

remote, if available, to control such functions.

Sometimes buttons other than described in these

instructions may actually perform the function. For

example, the CHAN and VOL buttons might be used

to navigate through menu choices. We recommend

you experiment with the remote to identify if such

situations pertain to your equipment.

Introduction..................................................................................... 3

Setup .................................................................................................. 3

Battery Installation............................................................... 3

Battery Saver........................................................................... 3

Code Saver ............................................................................... 3

Code Setup............................................................................... 3

Button Functions ................................................................... 4

Audio Functions ..................................................................... 6

AM/FM Tuner and Home Theater Functions ............ 7

Surround Sound Feature ................................................... 8

Direct Code Entry................................................................... 9

Code Search...........................................................................10

Using Your Remote....................................................................11

Code Identiﬁcation .............................................................11

Sleep Function......................................................................12

Controlling Devices with Power On and Off............13

Controlling Combo Devices............................................13

VCR/DVD/DVR Punch-Through .....................................13

Volume/Mute Control and Punch-Through.............14

All Volume/Mute Control to any one Mode .............14

Setting any Mode for its own Volume/Mute...........15

Troubleshooting..........................................................................16

Table of Contents

Battery Installation

1. On the back of the remote, push down on the tab

and lift the cover off.

2. Match the batteries to the + and - marks inside the

battery case, then insert 2 AAA Alkaline batteries.

3. Press the battery cover back into place.

Battery Saver

Your remote automatically turns off if the buttons

are depressed more than 30 seconds. This will save

your batteries should your remote get stuck in a place

where the buttons remain depressed (e.g., between

the sofa cushions).

Code Saver

You will have up to 10 minutes to change the

batteries in your remote without losing codes you

have programmed. However, do not press any

buttons until batteries are installed in the remote. If

buttons are pressed without batteries in the remote,

all codes will be lost.

Code Setup

The CODE SEARCH button is used to setup the

remote. You can either setup the remote using the

code tables (on separate sheet), or you can search

through the library of codes until you ﬁnd a code that

works for your product. Please refer to “ Code Search”

on page 10 for more information on using the code

search feature to learn how to search through the

library of codes for your products.

NOTE: You can store any kind of code under any

mode (except TV). I.E. you can store a VCR code under

the CBL button, or a Cable code under the DVD

button, etc. However, you can only store TV codes

under the TV button.

Setup

MUTE Turns off the

TV sound while the

picture remains.

CODE SEARCH

For setup.

Some buttons on the remote might have functions that

are referred to by different names on the device you are

controlling. E.G. PREV.CH may be called RECALL, or ENTER

may be called DISPLAY. These differences depend on the

brand and model of your product. Also, this remote can

only operate features that exist on your product. E.G., your

product must have PREV.CH ability for the PREV.CH button

to operate this feature.

ENTER

For some TV models, used after

direct channel number

entry to immediately change to

the selected channel.

TV, VCR, etc.

Selects product to

be operated.

Red Indicator

Lights when any but-

ton is pressed.

GUIDE displays

satellite or cable on-

screen program guide.

Button Functions

0-9

Enter numbers for direct

channel selection. Some

products require ENTER to

be pressed after channel

selection.

MENU-PROG Brings up the

main menu. If you are ready in

the menu system, press SELECT

to select a highlighted choice.

Use the arrow buttons to move

through the menu selections.

DISP Display button

shows date and time if

your TV or VCR has that

feature.

PIP, SWAP, INPUT. PIP and SWAP

operate your TV’s Picture-in-Pic-

ture features. INPUT selects the

video input of your TV.

VOLUME UP/DOWN

Changes the volume level

of the product, normally

the TV.

ON•OFF Turns

product On or Off.

CHANNEL Up/Down

Changes the channels

TRACK +/- controls

DVD/CD track selection

i.e. DVD/CD Track Skip

Up/Down (in DVD and CD

modes).

Button Functions, cont.

Note: The REC button must be pressed TWICE to record

from your VCR. For some brands of VCRs, you might need

to press the REC button once, then press it again for three

seconds.

RECORD, PLAY, STOP, REW, FF, PAUSE VCR control buttons

operate your VCR even when the remote is set to operate

the TV. Also operates DVD Scan -/+. Note the VCR keys also

control DVD when in DVD Mode.

PREV.CH Returns to

the previously selected

channel.

SLEEP enables the remote to

turn off your TV after a period

of 1 to 99 minutes.

Navigation buttons and

SELECT used to move through

on-screen menuing and guides.

With some DBS models the DISP

button should be used to select

the highlighted item. Use the

navigation buttons to move the

highlighted choice up, down,

left, or right.

CLEAR Removes the on screen

display to return to normal

viewing.

TV/VCR Operates the same

as the TV/VCR or antenna

keys on your original remotes.

Operating Audio Functions

Note: Not all functions work for all brands.

Turning on the Receiver or Mini-System

Point the remote control at the receiver and press the

AUDIO button. The receiver should turn on. In some cases

you might need to press the AUDIO button and then the

ON•OFF button to turn the system on.

Selecting a device Input

Device inputs such as CD Player or Tape Deck may be

selected depending on the features of your receiver or mini-

system. Input selection may be made either by pressing the

labeled number function, or by pressing the FUNCTION but-

ton to toggle through the inputs available on your system.

Using the number buttons to change audio inputs

Audio Button Descriptions

Press the AUDIO device button to enable the AUDIO MODE.

Audio functions are indicated by the blue button descrip-

tions.

LEVEL+/LEVEL- Sets the level of the speakers during test

tone mode.

DSP ON•OFF Enables the receiver’s Digital Sound Process-

ing mode.

DSP MODE When the DSP mode is enabled, pressing this

button lets you toggle through the various DSP modes.

CD, TAPE, TUNER, TV, VIDEO Used to directly select the

device you want to control. (Works in AUDIO mode).

AM/FM Lets you select the AM/FM band on your audio

receiver.

FUNCTION Toggles the different audio input devices. The

number buttons also select the function labels below the

buttons when in AUDIO mode.

DELAY-, ON, DELAY+ Increases or decreases the delay be-

tween the surround and main speakers when the receiver is

in surround sound mode.

ON•OFF, SURR. MODE Toggles the surround modes on

and off. SURR MODE toggles through the receiver’s various

surround sound mode settings.

FRONT, CENTER, REAR, TEST Adjusts the levels of the front,

center, and rear speakers respectively. The test tone must

be enabled ﬁrst by pressing the TEST button.

PRESET Used to operate preset channels while in the AUDIO

mode.

To select a device, press the number button (1-6) that

corresponds to the device you want to operate (CD, TAPE,

TUNER, TV, or VIDEO).

Using the function buttons to change audio devices

To select a device, press the FUNCTION button until the

input you want to operate appears on your system.

Operating a CD player or Tape Deck

Use the Play, Forward, Reverse, Record, Stop, and Pause

buttons for CD Players and Tape Decks. In some case the

Preset buttons (CHAN+/CHAN-) may change tracks on CD

Players.

AM/FM Tuner Functions

1. Press the AUDIO button.

2. Press the TUNER (3) button.

3. Press the AM/FM button to toggle between AM

and FM.

4. Use the preset (CHAN+ or CHAN- buttons to move

up and down channel presets.

Home Theater Systems

With GE receivers, a second press of the TV button

turns the receiver on.

1. Turn the TV on.

2. Press the AUDIO button.

3. Select the audio input either by using the labeled

number buttons, or the FUNCTION button.

4. Press the VOL+ or VOL- buttons to control volume.

NOTE: The volume buttons may operate both the

TV and the receiver volume at the same time. If this

presents a problem, it may be resolved by disabling

the TV speakers by going into the TV menu.

Audio Functions, cont.

The surround sound feature may be turned ON/OFF

by pressing the SURR ON•OFF button.

Surround Sound Feature

1. Press the SURR MODE button until

the desired mode is found.

2. Press DELAY+ or DELAY- to achieve the desired

delay affect.

3. Press the DSP ON•OFF button to turn

DSP (Digital Sound Processor) ON or

OFF.

4. Press the DSP mode button until the desired

effect is achieved.

5. Press the TEST button to listen to speaker

levels.

6. Press FRONT, CENTER, or REAR buttons to

speaker levels.

select speakers.

7. Press the LEVEL+ or

LEVEL- buttons to adjust

Write your codes down here for easy reference later.

Direct Code Entry

1. Press and hold the CODE SEARCH button

until the red indicator stays on, then release

the CODE SEARCH button.

2. Press and release the desired device

button (TV,VCR, etc.). The red indicator

blinks, then stays lit.

3. Enter the 4 digit code

from the code tables

(on separate sheet).

Note: after a valid code

entry, the red indicator

turns off. For an invalid

code, the red indicator

ﬂashes.

4. With your device on, press ON•OFF.

If the device turns off, no further

programming is required. Note: If

some buttons do not operate your

equipment, try one of the other

codes for your brand.

Type Type stored Code

TV TV

VCR

CBL

SAT

DVD

AUDIO/AUX

Code Search

If your device does not respond after you have tried

all the codes for your brand, or if your brand is not

listed, try searching for your code by following these

steps.

1. Manually turn on the device (TV, VCR, etc.) to be

controlled.

2. Press and hold the CODE SEARCH button

until the red indicator stays on, then

release the CODE SEARCH button.

3. Press and quickly release the desired

device button (TV, VCR, etc.). The red

indicator blinks off once.

4. Press the ON•OFF button repeatedly

(up to 300 times) until the device

to be controlled turns off. The red

indicator blinks off with each button

press.

Most users will store VCR codes under the VCR button,

Cable codes under CABLE, etc. If (for example) you want to

store a VCR code under CABLE, ﬁrst follow the procedure

for Direct Code Entry (previous page) and press CABLE in

step 2 of Direct Code Entry, then enter ANY VCR code in step

3 of Direct Code Entry. Then follow the steps above for Code

Search.

Note: Code Search starts from the currently stored four

digit number under that mode. Sometimes the ﬁrst code

that “works” with your device may only allow limited

functionality (e.g. the MENU button might not work). There

may be a code that performs more functions. Continue the

code search process until the best code is found.

5. Press and release ENTER to install the

code.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Beliebte Universalfernbedienung Handbücher anderer Marken

Pronto

Pronto Peel Bedienungsanleitung

Radio Shack

Radio Shack Wireless Remote Control System Bedienungsanleitung

AUVIO

AUVIO Universal Home Theater Remote Bedienungsanleitung

Philips

Philips Icon SRU4106 Bedienungsanleitung

THOMSON

THOMSON ROC4309 Bedienungsanleitung

Philips

Philips pm625S Bedienungsanleitung

RCA

RCA RCU600WMS - Universal Remote Control Bedienungsanleitung

Blackweb

Blackweb BWB17AV002 Bedienungsanleitung

Marmitek

Marmitek DoorGuard 300 Bedienungsanleitung

Chunghop

Chunghop RM-L618 Bedienungsanleitung

Anderic

Anderic KTN828 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Bedienungsanleitung

Medion

Medion E74023 Bedienungsanleitung

intensity

intensity RM02A Bedienungsanleitung

Sky

Sky MY Bedienungsanleitung

RCA

RCA RCU600M - Universal Remote Control Bedienungsanleitung

Savant

Savant SUR-0500 Kurzanleitung

GDI

GDI GDI-WT2K Bedienungsanleitung