Geemarc LoopHEAR 160 Bedienungsanleitung

Small area and counter loop

Amplifier

Amplificateur pour Boucle

Magnétique

Induktionsschleife

English P1

Français P10

Deutsch P18

INTRODUCTION

The LH160 has been designed as a

standalone Induction Loop system for

use inside a vehicle, point of sale desks,

banks, ticket counters or other

customer service locations. It is easy to

install and use.

The unit is designed for use with the

standard Geemarc multi turn loop

antenna (optional accessory) which can

cover an area of about 1m2, or a local

area loop covering an area upto 40m2.

The functions and features include the

following:

1. Power On indicator

2. MIC1 indicator

3. MIC2 or AUX input indicator

4. Loop current indicator

5. TONE adjustment

6. MIC1 level adjustment

7. MIC2 or AUX input level adjustment

8. Loop current adjustment

9. MIC1 input socket

10. MIC2 or AUX input socket

11. Selector switch for MIC2 or AUX

input

12. Power input socket

13. Loop antenna connector

The functions and features include the

following:

●Microphone input for use with

standard desktop or lapel

Microphones.

●Dual function input for a second

Microphone or Aux signal (like from a

MP3 player) selectable via a switch.

●Power input from a car battery via a

car cigarette lighter socket or a 12 or

13 V DC power adaptor.

●Loop output with spring clamps for

easy connection.

●Individual level controls for each input

and loop output.

●LED indication of Power, Input

signals and Loop output current for

easy set up.

INSTALLATION & OPERATION

Choose a suitable location, free from

magnetic or electrical interference for

installation and use of LH160

(1) Install the LH160 onto a panel or

wall under the counter, ensuring that

the cables are securely anchored.

(2) Connect the loop antenna (optional

accessory) or other compatible loop

coil to the loop output terminals. For

optimal performance the loop antenna

or coil should be located about 80cm in

ftront of the customer.

Press the tab above the connector

terminal and release after inserting the

wire of the loop antenna or coil. Polarity

is not important.

(3) Connect a compatible Geemarc

Microphone to the Mic1 jack.

(4) If required connect a second

compatible Microphone or Aux input to

the Mic2/Aux jack. Use the switch to

select the type of input.

(5) Using a small common blade flat

screwdriver, turn the Mic1, Mic2/Aux,

Tone and Field Strength controls fully

anti-clockwise (to their minimum levels).

(6) Select the power source (car battery

or mains AC adaptor) and connect the

car adaptor cable or AC power adaptor

to the power input socket.

(7) Switch on the external power and

check that the Power ON LED

illuminates

(8) Apply the input signal (for example

speaking into the Mic) to Mic1 or

Mic2/Aux and turn the corresponding

control clockwise until the

corresponding LED begins to light up.

(9) Repeat the above for the second

input if used. While setting up, apply

only one input at a time.

(10) While the input signal is present,

adjust the Loop Current adjustment

control clockwise to get the desired

loop output level. The Loop Current

Indication LED will become brighter as

the Loop current is increased

(11) Test the performance of the

system using a field strength meter.

Adjust the Tone and Loop Current

controls to achieve the desired

performance. The Tone adjustment

enables compensation for loss of

higher frequency signal during

transmission.

(12) To connect the LH160 inside a

motor vehicle please contact Geemarc

at enquiries@geemarc.com

LOOP ANTENNA & PERFORMANCE

For optimum performance, use the loop

antenna (optional accessory) or a local

area loop with the following

specifications:

Loop resistance 0.3 to 1 ohm

Loop Impedance 1.3 ohm at 1.6 KHz

For local area loops, use wire 0.5 to 1.5

mm2 or 22 to 16 AWG

The area covered by the unit is about

80cm ± 60° from the center point of the

loop antenna/coil

0.8m

NTENN

120°

SAFETY INFORMATION

General

Do not open the unit. Contact the

helpline for all repairs.

Cleaning

Clean the LoopHEARTM with a soft

cloth. Never use polish or cleaning

agents - they could damage the finish

or the electronics inside.

Environmental

●Do not expose to direct sunlight.

●Always ensure there is a free flow of

air over the surfaces of the

LoopHEARTM

●Do not place any part of your product

in water and do not use it in damp or

humid conditions e.g. bathrooms.

●Do not expose your product to fire or

other hazardous conditions.

GUARANTEE

From the moment your GeemarcTM

product is purchased, GeemarcTM

guarantee it for the period of two years.

During this time, all repairs or

replacements (at our discretion) are

free of charge. Should you experience

a problem then contact our help line or

visit our website at www.geemarc.com.

The guarantee does not cover

accidents, negligence or breakages to

any parts. The product must not be

tampered with or taken apart by

anyone who is not an authorised

GeemarcTM representative. The

GeemarcTM guarantee in no way limits

your legal rights.

IMPORTANT: YOUR RECEIPT IS

PART OF YOUR GUARANTEE AND

MUST BE RETAINED AND

PRODUCED IN THE EVENT OF A

WARRANTY CLAIM.

DECLARATION: GeemarcTM Telecom

SA hereby declares that this product is

in compliance with the essential

requirements and other relevant

provisions of the Radio and

Telecommunications Terminal

Equipment Directive 1999/5/EEC and

Please note: The guarantee applies

to the United Kin

dom onl

in particular article 3 section 1a, 1b and

section 2.

The declaration of conformity

may be consulted at

www.geemarc.com

Electrical connection: The apparatus

is designed to operate from a 100 to

230Vac 50-60Hz supply. (Classified as

‘hazardous voltage’ according to

EN60950 standard), or from 12-13Vdc

car battery cord adaptor.

This device complies with Part 15 of

the FCC Rules [and with RSS-210 of

Industry Canada].

Operation is subject to the following

two conditions:

(1) this device may not cause harmful

interference

AND

(2) this device must accept any

interference received, including

interference that may cause undesired

operation..

RECYCLING DIRECTIVES

The WEEE (Waste Electrical and

Electronic Equipment) has been put in

place for the products at the end of

their useful life are recycled in the best

way.

When this product is finished with,

please do not put it in your domestic

waste bin.

Please use one of the following

disposal options:

- Remove the batteries and deposit

them in an appropriate WEEE skip.

Deposit the product in an appropriate

WEEE skip.

- Or, hand the old product to the retailer.

If you purchase a new one, they

should accept it.

Thus, if you respect these instructions

you ensure human health and

environmental protection.

For product support and help, visit our

website at www.geemarc.com

For our Customer Helpline

Telephone: 01707 384438

Fax: 01707 832529

Inhaltsverzeichnis

Sprachen:

Andere Geemarc Verstärker Handbücher

Geemarc

Geemarc CLA-40 VOX Bedienungsanleitung

Geemarc

Geemarc clearsound amplicall 20 Bedienungsanleitung

Geemarc

Geemarc ClearSound CL7150 Bedienungsanleitung

Geemarc

Geemarc AMPLICALL10 Bedienungsanleitung

Geemarc

Geemarc CL7160 Bedienungsanleitung

Geemarc

Geemarc loophear 160 v2 Bedienungsanleitung

Geemarc

Geemarc CL7300v2 Bedienungsanleitung

Geemarc

Geemarc LOOPHEAR 10 Bedienungsanleitung

Geemarc

Geemarc LoopHEARTM 20 Bedienungsanleitung

Geemarc

Geemarc LoopHEAR 102 V2 Bedienungsanleitung

Geemarc

Geemarc P-Amp40 Bedienungsanleitung

Geemarc

Geemarc AMPLICALL10 Bedienungsanleitung

Geemarc

Geemarc CL11 Bedienungsanleitung

Geemarc

Geemarc CLA-40 VOX Bedienungsanleitung

Geemarc

Geemarc In-Line Amplifier CLA30/40 Bedienungsanleitung

Geemarc

Geemarc AMPLICALL 10 Bedienungsanleitung

Geemarc

Geemarc CLA-30 Bedienungsanleitung

Geemarc

Geemarc Loop Hear LH600 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung