Gefen DVI 1500 Bedienungsanleitung

www.gefen.com

DVI 1500

Extender

EXT-DVI-1500HD

User Manual

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday through Friday.

Write To:

Gefen Inc.

c/o Customer Service

20600 Nordhoff Street

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen Inc. reserves the right to make changes in the hardware, packaging

and any accompanying documentation without prior written notice.

DVI 1500 Extender is a trademark of Gefen Inc.

ASKING FOR ASSISTANCE

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

TABLE OF CONTENTS

Introduction / Operation Notes1.

Features2.

Sender Panel Descriptions3.

Receiver Panel Descriptions4.

Connecting and Operating the DVI 15005.

Network Cable Wiring Diagram6.

Speciﬁcations7.

Warranty8.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

The Gefen DVI•1500 allows a single link video signal to be extended over long

distances by using multimode LC-LC ﬁber optic cable. Fiber Optics technology

allows the DVI•1500 to carry video signals over long distances that would not be

possible with traditional CAT5 extension. The use of ﬁber optic cabling protects

the video signal from electromagnetic interference (EMI) which can degrade the

video signal.

How It Works

The DVI•1500S sender unit sits next to your computer, set-top box or DVD player

source. Cables supplied with the DVI•1500 connect your DVI source to the send

unit. The DVI•1500R receive unit sits next to your DVI display - up to 1640 feet

(330 feet with HDCP) away. The display plugs into the back of the DVI•1500R

receiver unit. One CAT-5 cable and a multi mode LC ﬁber optic cable (4 strand)

connect the DVI•1500S and the DVI•1500R units to each other.

INTRODUCTION

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE DVI 1500

50 or 62.5 micron multi-mode ﬁber optic cable is required for operation of the• DVI 1500.

Maximum extension range of 330 feet (100 meters) when the source• requires HDCP. One CAT-5, CAT-5e or CAT6 cable is used to transmit DDC

and HDCP data back to the source.

Maximum range of 1640 feet (500 meters) when the source does not require• HDCP. This scenario does not require the CAT-5, CAT5e or CAT-6 cable if

the source does not require DDC information. If DDC is required, the use of

an EDID storage device (part# EXT-DVI-EDIDN, EXT-DVI-EDIDP) can be

used to transmit DDC information back to the source.

HDCP compliant•

Compatible with all DVI and HDMI* displays.•

NOTE: *When used with a HDMI to DVI adapter

OPERATION NOTES

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

FEATURES

Features

Extends any DVI (digital visual interface) compliant device up to 1640 feet/500 meters• (330 feet with HDCP) from the computer

Uses a four-strand multimode LC-LC ﬁber optic cable for video signals•

Uses one CAT-5 cable for DDC and control signals•

Eliminates computer noise where you work•

Supports resolutions up to 1080p, 2K, and 1920 x 1200•

Supports DDWG standard for DVI compliant monitors•

HDCP compliant•

Includes:

(1) DVI 1500S Sender unit

(1) DVI 1500R Receiver unit

(2) 5V DC Power Supply

(1) 6 ft DVI cable (M-M)

(1) User’s Manual

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

SENDER PANEL DESCRIPTIONS

Back Panel

Front Panel

Power LED

Indicator

RJ-45

Port

DVI Input

Port

Fiber Optic

LC-LC Terminals

Status LED

Indicator

5V DC

Power Input

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

RECEIVER PANEL DESCRIPTIONS

Back Panel

Front Panel

Power LED

Indicator

RJ-45

Port DVI Output

Port Fiber Optic

LC-LC Terminals

Status LED

Indicator

5V DC

Power Input

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

CONNECTING AND OPERATING THE DVI 1500

How To Connect The DVI 1500

Connect the DVI source to the DVI 1500 sender unit using the supplied DVI1. cable.

Connect a user supplied CAT-5, CAT-5e or CAT-6 cable to the sender unit.2.

Connect four user supplied multi-mode LC terminated ﬁber optic cables into3. DVI 1500 sender unit.

NOTE: 50 or 62.5 micron multi-mode ﬁber optic cable is required for operation of

the DVI 1500.

Connect the other end of the CAT-5, CAT-5e or CAT-6 cable into the DVI4. 1500 receiver unit.

Connect the other ends of all four multi-mode LC terminated ﬁber optic5. cables into the DVI 1500 receiver unit.

NOTE: Please take careful note of the labeling above each ﬁber optic port on

both the sending and receiving DVI 1500 units. The most common user error is

to mis-match the ﬁber optic cable connections on each end, which results in no

video being transmitted.

Connect the display to the DVI 1500 receiver unit using a user supplied DVI6. cable.

Connect the included 5V DC power supplies into both the DVI 1500 sending7. and receiving units.

Power on the display, followed by the source.8.

No further adjustments are necessary to operate the DVI 1500.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

NETWORK CABLE WIRING DIAGRAM

12345678

Gefen has speciﬁcally engineered their products to work with the TIA/EIA-568-B

speciﬁcation. Please adhere to the table below when ﬁeld terminating cable for

use with Gefen products. Failure to do so may produce unexpected results and

reduced performance.

CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types.

Gefen recommends using solid core cabling. CAT-6 cable is also recommended

for best results.

Each cable run must be one continuous run from one end to the other. No splices

or use of punch down blocks.

Pin Color

1 Orange / White

2 Orange

3 Green / White

4 Blue

5 Blue / White

6 Green

7 Brown / White

8 Brown

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Video Ampliﬁer Bandwidth ....................................................... 225 MHz maximum

Input Video Signal .............................................................................. 1.2 Volts p-p

Input DDC Signal ......................................................................... 5 Volts p-p (TTL)

Single Link Range ............................................................ 1080p, 2k, 1920 x 1200

DVI Connector ..................................................................... DVI-D (19 pin) female

Video Link Connector ........................................................................................ LC

DDC Link Connector ...................................................................... RJ-45 Shielded

Power Supply .......................................................... 5V DC with locking connector

Power Consumption .............................................................. 36W watts x 2 (max)

Link Connectors ............................................................. LC Fiber, Shielded RJ-45

Rack mountable .............................................................................. 1U rack space

Dimensions ......................................................................... 3.25”D x 4.25”W x 1”H

Shipping Weight ............................................................................................ 5 lbs.

Rack mountable .............................................................................. 1U rack space

SPECIFICATIONS

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201

Fax 07131 911203

[email protected]

Inhaltsverzeichnis

Andere Gefen Extender Handbücher

Gefen

Gefen HDMI-CAT5X Bedienungsanleitung

Gefen

Gefen EXT-DIGAUD-141 Bedienungsanleitung

Gefen

Gefen EXT-USB-500 Bedienungsanleitung

Gefen

Gefen EXT-WHD-1080P-SR Bedienungsanleitung

Gefen

Gefen EXT-3GSDI-FO-141 Bedienungsanleitung

Gefen

Gefen EXT-WRS232 Bedienungsanleitung

Gefen

Gefen EXT-DVI-3500HD Bedienungsanleitung

Gefen

Gefen ex-tend-it DVI-CAT5 Bedienungsanleitung

Gefen

Gefen FW-1394 Bedienungsanleitung

Gefen

Gefen USB-MINI Bedienungsanleitung

Gefen

Gefen ETH-2-PLC Bedienungsanleitung

Gefen

Gefen RS-232 Bedienungsanleitung

Gefen

Gefen EXT-WRS232 Bedienungsanleitung

Gefen

Gefen EXT-HDMI1.3-1CAT6 Bedienungsanleitung

Gefen

Gefen EXT-DVI-FM-1000 Bedienungsanleitung

Gefen

Gefen EXT-DVI-1CAT6-GI Bedienungsanleitung

Gefen

Gefen GTB-HDKVM-ELR Bedienungsanleitung

Gefen

Gefen GTB-DVIKVM-ELR Bedienungsanleitung

Gefen

Gefen EXT-DVI-CAT5-4X Bedienungsanleitung

Gefen

Gefen CAT5-8000 Bedienungsanleitung

Gefen

Gefen EXT-VGAAUD-CAT5-142 Bedienungsanleitung

Gefen

Gefen GEF-DVI-FM2000 Bedienungsanleitung

Gefen

Gefen EXT-DVI-EDIDP Bedienungsanleitung

Gefen

Gefen EXT-HDMI1.3-1FO Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung