Gefen EXT-DVIKVM-441 Bedienungsanleitung

www.gefen.com

4x1 DVI KVM

Switcher

EXT-DVIKVM-441

User Manual

ASKING FOR ASSISTANCE

Rev X3

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday PST (Paciﬁc Standard Time)

Write To:

Gefen Inc.

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen Inc. reserves the right to make changes in the hardware, packaging and

any accompanying documentation without prior written notice.

4x1 DVI KVM Switcher is a trademark of Gefen Inc.

All trademarks are the property of their respective companies

CONTENTS

1 Introduction

2 Operation Notes

3 Features

4 Panel Layout

5 Panel Descriptions

6 Connecting & Operating The 4x1 DVI KVM Switcher

7 Operation Notes & Troubleshooting

8 RMT-4IR Remote Control Description

9 4x1 DVI KVM Switcher Remote Installation

10 RMT-4IR Remote And 4x1 KVM Switcher Conﬁguration

11 Rack Mount Installation

12 Speciﬁcations

13 Warranty

INTRODUCTION

Congratulations on your purchase of the 4x1 DVI KVM Switcher. Your complete

satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions

that harness integration, extension, distribution and conversion technologies.

Gefen’s reliable, plug-and-play products supplement cross-platform computer

systems, professional audio/video environments and HDTV systems of all sizes

with hard-working solutions that are easy to implement and simple to operate.

The Gefen 4x1 DVI KVM Switcher

The rack-mountable Gefen 4x1 single link DVI KVM Switcher offers an

economical solution by eliminating the need to purchase many displays for each

computer in a studio or lab situation. A plug-and-play solution that supports both

Macintosh and IBM-PC computers, the 4x1 DVI KVM Switcher shares one DVI

display with up to four computers or other DVI video sources. A single USB 2.0

port, keyboard & mouse ports, and an analog audio jack are also switched. The

switcher saves space on your desktop by eliminating a crowded workspace full

of DVI monitors, keyboards & mice, and USB and audio cables. Switching of DVI

sources is easy and reliable.

How It Works

The DVI monitor is connected to the 4x1 DVI KVM Switcher’s output. Up to four

DVI video sources connect to the switcher’s DVI inputs using included high

quality DVI cables. The included power supply is connected to the switcher via

the locking power plug and then to a power outlet. The currently selected DVI

video signal appears on the shared monitor. DVI Video sources (and optionally

keyboards & mice, USB and audio cables) are selected/switched using the RMT-

4IR remote control, RS-232 control, or the input selector push button on the front

panel of the switcher.

OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE GEFEN 4X1 DVI KVM SWITCHER

• The 4x1 DVI KVM Switcher will take any of up to four (4) DVI single-link

resolution inputs and switch them, one at a time, to a DVI output device

such as a display/monitor or projector. Supported resolutions can be up to

1920x1200.

• The 4x1 DVI KVM Switcher is housed in a metal box for better RF shielding.

FEATURES

Features

• Switches easily between any four DVI sources.

• Switches USB 2.0, keyboard & mouse, and analog audio

• Maintains highest resolution single link DVI

• Supports resolutions up through 1920x1200

• Discrete IR remote control included

• Serial RS-232 remote port for switching via automated control or PC

• Supports DDWG standards for DVI monitors

• Rack ears included

Package Includes

(1) 4x1 DVI KVM Switcher

(1) RMT-4IR Remote Control

(1) 5V DC Power Supply

(4) 6-foot Dual Link DVI cables

(4) 6-foot USB cables

(4) 6-foot 3.5mm jack analog audio cables

(1) Set of rack ears

(1) User’s Manual

Back Panel

PANEL LAYOUT

Front Panel

9 10 11

8765

12 13

PANEL DESCRIPTIONS

1 IR Receiver

Receives IR signal from the handheld Infrared remote control unit included with

the 4x1 DVI KVM Switcher.

2 DVI Signal Status LEDs 1-4

Provide visual conﬁrmation of the currently selected DVI input signal being

output to the DVI display device.

3 DVI Input Selector Bank

Push-button switches select the next DVI input.

4 Power Indicator LED

Indicates when the 4x1 DVI KVM Switcher is receiving 5V DC power from its

includedAC power supply.

5 3.5mm Analog Audio Inputs 1-4

Audio Sources 1-4 connect to the switcher here on 3.5mmAnalogAudio Inputs.

6 3.5mm Analog Audio Output

This audio output port connects to an external ampliﬁed audio device. The

selected audio input will be output through this port.

7 USB Type A Control Ports 1-2

The keyboard & mouse for controlling the selected remote computer or device

connects to the switcher here.

8 USB Type B Ports 1-4

USB devices (typically computers) one through four connect to the switcher here

9 5V Power Receptacle

Supplies power to the 4x1 DVI KVM Switcher from the included external 5V DC

power supply.

10 DVI Input Ports 1-4

DVI video sources 1-4 attach to the 4x1 DVI KVM Switcher.

11 DVI Output Port

This DVI output port is connected to the display device (Monitor, Projector).

12 RJ45 Wired Remote Port

Wired contact-closure remote control (Gefen’s EXT-RMT-4) attaches here.

13 IR Remote Extender Port

The optional IR Extender (Gefen’s EXT-RMT-EXTIR) attaches here to extend

the range of the included IR remote by placing the infrared eye farther from the

unit. Please see the bottom of page 8 for more information.

CONNECTING & OPERATING THE 4X1 DVI KVM SWITCHER

How to Connect the 4x1 DVI KVM Switcher to your devices:

1. Connect your computers’ DVI, USB, and Audio sources to the 4x1 DVI KVM

Switcher inputs using the supplied cables.

2. Connect your USB and audio devices to the USB and audio outputs using the

supplied cables.

3. Connect your DVI-compliant display to the DVI output of the 4x1 DVI KVM

Switcher using a user-supplied DVI cable.

4. Connect the included 5V DC power supply to the Switcher by connecting its

5V DC power supply tip into the receptacle in the rear of the unit, then plug it

into the wall.

5. Turn on the DVI display or projector ﬁrst, then the DVI video sources/

computers.

Note: Computers must be turned on one at a time and the switcher must

be selected to the computer that is booting up. This is so that monitor

information (EDID) can be transmitted from the display to each computer.

After one computer completes the startup process, you can boot up the

second computer and repeat the process with the remaining computers.

How to Operate the 4x1 DVI KVM Switcher:

1. Use the RMT-4IR remote control to remotely switch between DVI video

sources.

2. Alternatively, use the front panel selector buttons.

OPERATION NOTES & TROUBLESHOOTING

USB

If your USB stops functioning correctly, you can manually re-intialize the

USB hub in the switch by pushing twice on the channel select button that

corresponds with the channel that the switcher is pointed at, on the front of

the unit. This will cause the channel selected LED to blink once letting you

know that the internal USB hub has been re-initialized. To have the USB

re-initialize automatically every time you switch, look under the 4x1 DVI

Switcher and locate the blank sticker. Peel it off to reveal a bank of four dip

switches. Find the dip switch labeled “4” and ﬂip it to the ON position. Now

every time you switch the hub will re-initialize itself.

Video

When turning on or rebooting your computers, the 4x1 DVI KVM Switcher

must be selected to the computer that is booting until the computer

completes the boot cycle. This step can be eliminated using the Gefen DVI

Detective. If you lose your picture when you switch between sources you will

need a DVI Detective.

Inhaltsverzeichnis

Andere Gefen Schalten Handbücher

Gefen

Gefen GTB-HD4K2K-441-BLK Bedienungsanleitung

Gefen

Gefen Multiview EXT-HD-MVSL-441 Bedienungsanleitung

Gefen

Gefen HDMI1.3-441 Bedienungsanleitung

Gefen

Gefen GTV-AUDDEC-N Bedienungsanleitung

Gefen

Gefen EXT-UHDV-HBTLS-TX Bedienungsanleitung

Gefen

Gefen EXT-GEFENTV1.3-441 Bedienungsanleitung

Gefen

Gefen EXT-DVI-848 Bedienungsanleitung

Gefen

Gefen GTV-MFS Bedienungsanleitung

Gefen

Gefen EXT-HD-EDIDPN Bedienungsanleitung

Gefen

Gefen EXT-DVIKVM-241 Bedienungsanleitung

Gefen

Gefen 8x1 HDMI Switcher Bedienungsanleitung

Gefen

Gefen RMT-2-CAT5 Bedienungsanleitung

Gefen

Gefen 2x4 HDMI Switcher/Splitter Bedienungsanleitung

Gefen

Gefen 4x4 HDMI Bedienungsanleitung

Gefen

Gefen MINIDVI-142 Bedienungsanleitung

Gefen

Gefen GTB-MHDMI1.3-442 Bedienungsanleitung

Gefen

Gefen 4K ULTRAHD EXT-UHD-88 Bedienungsanleitung

Gefen

Gefen 2X1 DVI KVM SWITCHER Bedienungsanleitung

Gefen

Gefen EXT-DVI-841 Bedienungsanleitung

Gefen

Gefen Digital Audio Switcher Bedienungsanleitung

Gefen

Gefen 2X2 VGA SWITCHER Bedienungsanleitung

Gefen

Gefen 2X1 DVI KVM SWITCHER Bedienungsanleitung

Gefen

Gefen HD-441 Bedienungsanleitung

Gefen

Gefen SL Switcher Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung