Gefen EXT-DVIKVM-841DL Bedienungsanleitung

www.gefen.com

8x1 DVI KVM DL/SL

Switcher

EXT-DVIKVM-841DL

User Manual

ASKING FOR ASSISTANCE

Rev A

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday.

Write To:

Gefen Inc.

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen Inc. reserves the right to make changes in the hardware, packaging and

any accompanying documentation without prior written notice.

8x1 DVI KVM DL/SL Switcher is a trademark of Gefen Inc.

All trademarks are the property of their respective companies

CONTENTS

1 Introduction

2 Operation Notes

3 Features

4 Panel Layout

5 Panel Descriptions

6 Connecting & Operating The 8x1 DVI KVM DL/SL Switcher

7 8x1 DVI KVM DL/SL Remote Description

8 8x1 DVI KVM DL/SL Switcher Remote Installation

9 RMT-8IR Remote and 8x1 KVM Switcher Conﬁguration

10 EDID Modes

12 DL (Dual Link) Only Modes

13 RS-232 Serial Communication

14 RS-232 Serial Communication Commands

17 RS-232 Serial Communication - Upload EDID

18 Rack Mount Installation

19 Speciﬁcations

20 Warranty

INTRODUCTION

Congratulations on your purchase of the 8 x1 DVI-DL KVM Switcher. Your

complete satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions

that harness integration, extension, distribution and conversion technologies.

Gefen’s reliable, plug-and-play products supplement cross-platform computer

systems, professional audio/video environments and HDTV systems of all sizes

with hard-working solutions that are easy to implement and simple to operate.

The Gefen 8x1 DVI KVM DL/SL Switcher

The rack-mountable Gefen 8x1 dual link/single link DVI KVM Switcher offers an

economical solution by eliminating the need to purchase many displays for each

computer in a studio or lab situation. A plug-and-play solution that supports both

Macintosh and IBM-PC computers, the 8x1 DVI KVM DL/SL Switcher shares one

DVI display with up to eight computers or other DVI video sources. A single USB

2.0 port, keyboard & mouse ports, and an analog audio jack are also switched.

The switcher saves space on your desktop by eliminating a crowded workspace

full of DVI monitors, keyboards & mice, and USB and audio cables. Switching of

DVI sources is easy and reliable.

How It Works

The DVI monitor is connected to the 8x1 DVI KVM DL/SL Switcher’s output. Up

to eight DVI video sources connect to the switcher’s DVI inputs using included

high quality DVI cables. The included power supply is connected to the switcher

via the locking power plug and then to a power outlet. The currently selected DVI

video signal appears on the shared monitor. DVI Video sources (and optionally

keyboards & mice, USB and audio cables) are selected/switched using the RMT-

8IR remote control, RS-232 control, or the input selector push button on the front

panel of the switcher.

OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE GEFEN 8X1 DVI KVM DL/SL SWITCHER

• The 8x1 DVI KVM DL/SL Switcher will take any of up to eight (8) DVI dual-

link or single-link resolution inputs and switch them, one at a time, to a DVI

output device such as a display/monitor or projector. Resolutions can be up

to 3840x2400.

• The 8x1 DVI KVM DL/SL Switcher is housed in a metal box for better RF

shielding.

• Computers must be turned on one at a time and the switcher must

be selected to the computer that is booting up. This is so that monitor

information (EDID) can be transmitted from the display to each computer.

After one computer completes the startup process, you can boot up the

second computer and repeat the process with the remaining computers.

This can be avoided with the use of the LOCAL EDID mode (page 11)

that will constantly supply each computer with an EDID. In this scenario, a

stored EDID, or user uploaded EDID, is supplied to each input for use by

the connected source device. Then, each computer can boot up in any order

and at anytime, regardless of which computer the switch is selected to.

FEATURES

Features

• Switches easily between any eight DVI-SL or DVI-DL sources

• Switches USB 2.0, keyboard & mouse, and analog audio

• Maintains highest resolution dual link DVI

• Supports resolutions up through 3840x2400

• Extends the range of DVI video up to 50 feet

• Discrete IR remote control included

• Serial RS-232 remote port for switching via automated control or PC

• Supports DDWG standards for DVI monitors

• Rack ears included

Package Includes

(1) 8x1 DVI KVM DL/SL Switcher

(1) RMT-8IR Remote Control

(1) 5V DC Power Supply

(8) 6-foot Dual Link DVI cables

(8) 6-foot USB cables

(8) 6-foot 3.5mm jack analog audio cables

(1) Set of rack ears

(1) User’s Manual

Back Panel

PANEL LAYOUT

Front Panel

10 1211

PANEL DESCRIPTIONS

1 External IR Port

For connection of external IR extension device such as the Gefen IR Extender

(part # EXT-RMT-EXTIR).

2 IR Receiver

Receives IR signal from the handheld Infrared remote control unit included with

the 8x1 DVI KVM DL/SL Switcher.

3 DVI Signal Status LEDs 1-8

Provide visual conﬁrmation of the currently selected DVI input signal being

output to the DVI display device.

4 DVI Input Selector

Push-button switch cycles the next DVI input 1-8 in a forward sequence starting

again at 1.

5 Power Indicator LED

Indicates when the 8x1 DVI KVM DL/SL Switcher is receiving 5V DC power

from its includedAC power supply.

6 5V Locking Power Receptacle

Supplies power to the 8x1 DVI KVM DL/SL Switcher from the included external

5V DC power supply. The 5V power supply has a locking power tip which

screws into this receptacle.

7 DVI Input Ports 1-8

DVI video sources one through eight attach to the 8x1 DVI KVM DL/SL

Switcher.

8 DVI Output Port

This DVI output port is connected to the display device (Monitor, Projector).

9 RS-232 Serial Communications Interface

Provided for external control of the 8x1 DVI KVM DL/SL Switcher.

10 3.5mm Analog Audio Jacks 1-8

Audio Sources one through eight connect to the switcher here.

11 USB Type B Ports 1-8

USB devices one through eight connect to the switcher here.

12 USB Type A Control Ports 1-2

The keyboard & mouse for controlling the selected remote computer or device

connects to the switcher here.

CONNECTING & OPERATING THE 8X1 DVI KVM DL/SL SWITCHER

How to Connect the 8x1 DVI KVM DL/SL Switcher to your devices:

1. Connect your computers’ DVI, USB, and Audio sources to the 8x1 DVI KVM

DL/SL Switcher inputs using the supplied cables.

2. Connect your DVI display to the DVI output of the 8x1 DVI KVM DL/SL

Switcher using a user-supplied DVI cable.

3. Connect your USB and audio devices to the USB and audio outputs with user-

supplied cables.

4. Connect the included 5V DC power supply to the Switcher by by screwing its

5V DC power supply tip into the receptacle in the rear of the unit, then plug it

into the wall.

5. Turn on the DVI display or projector ﬁrst, then the DVI video sources/

computers.

Note: Computers must be turned on one at a time and the switcher must