Geneq F100 Bedienungsanleitung

1/ 26

GENEQ F100

User Manual

2/ 26

Statement

Please read carefully:

The final interpretation of this user manual belongs to GENEQ INC.

Thank you very much for your purchase. For directions on how to use the

product, please be sure to read the user manual.

This user manual is only for your receiver. If your receiver does not match the

case in user manual, the actual situation of the receiver shall prevail.

Information in this document is subject to change without notice; GENEQ INC.

reserves the right to change or improve its products and to make changes in

the content without obligation to notify any person or organization of such

changes or improvements. If you have any questions, please contact customer

service center, or contact our authorized dealers.

Customer safety is important. Please carefully read the notes and instructions

in User Manual. In order to avoid unexpected damage, you should only use

original supplied parts. If you do not use the system with the correct procedure

or connect incompatible accessories, cause the equipment damage, and may

even endanger other person and your safety. In this regard, the company does

not assume any responsibility.

3/ 26

Contents

1. Product overview__________________________________________________________7

2. Technical Specification__________________________________________________ 10

2.1. GNSS _______________________________________________________________________10

2.2. System configuration ______________________________________________________11

2.3. Tilt Survey __________________________________________________________________11

2.4. Weight and Measurement_________________________________________________11

2.5. Environmental _____________________________________________________________12

2.6. Electrical____________________________________________________________________12

2.7. Data interface ______________________________________________________________12

2.8. User interface ______________________________________________________________12

3. WEB UI___________________________________________________________________ 13

3.1. Status ______________________________________________________________________13

3.1..1. Position __________________________________________________________________________ 13

3.1..2. Datalink __________________________________________________________________________ 14

3.1.3. Satellites _________________________________________________________________________ 15

3.1.4. Information ______________________________________________________________________ 16

4/ 26

3.2. Settings ____________________________________________________________________17

3.2.1. Working Mode___________________________________________________________________ 17

3.2.2. Satellite Settings _________________________________________________________________ 18

3.2.3. Device Configuration ____________________________________________________________ 19

3.2.4. NMEA Message __________________________________________________________________ 20

3.2.5. View Logs________________________________________________________________________ 20

3.2.6. Configuration Set ________________________________________________________________ 21

3.3. Download __________________________________________________________________21

3.3.1. Raw Data ________________________________________________________________________ 21

3.3.2. Backup Data _____________________________________________________________________ 22

3.4. Management_______________________________________________________________22

4. Pannel Settings__________________________________________________________ 23

4.1. Power on/off _______________________________________________________________23

4.2. Working Status interface __________________________________________________23

4.2.1. Base Station Mode _______________________________________________________________ 23

4.2.2. Rover Station Mode______________________________________________________________ 23

4.2.3. Static Mode ______________________________________________________________________ 23

4.3. Data Link ___________________________________________________________________24

4.3.1. Radio ____________________________________________________________________________ 24

4.3.2. GPRS_____________________________________________________________________________ 24

4.3.3. External __________________________________________________________________________ 24

4.4. Differential _________________________________________________________________25

4.5. System Settings ____________________________________________________________25

5. Tilt calibration instructions _____________________________________________ 25

5.1. Magnetic calibration_______________________________________________________25

5/ 26

5.2. MEMS Calibration__________________________________________________________26

5.3. Pole Calibration ____________________________________________________________27

6. Accessories ______________________________________________________________ 28

First, thank you very much for purchasing Geneq F100 geodesic GNSS receiver

(hereinafter referred to as F100). F100 is a GNSS receiver with strong performance

and constant strength. It takes LINUX system as the development platform, stable

and reliable, support secondary development, it can play well in different fields.

Product Features:

● 5W Receive/Transmit full protocol radio

● Super capacity smart battery

●Capsule design 2.0

●Smart Color touch screen

●Combined antenna

●Tilt Survey 3.0

●Intelligent base

●Type-C port

The next I will show you the excellent performance and usage of F100

6/ 26

1. Product Overview

❶

Satellite indicator light

Extinguish: No receiving satellites；

Blink red:Satellites received, but not positioning success；

Blink green: Positioning success, but not fixed；

Green light on: Fixed solution；

Red/Green lights flicker alternately: GNSS motherboard dysfunction;

7/ 26

❷

Datalink indicator light

Green light on: Datalink setup success；

Blink green: Data transmission；

Blink blue: Blue light flashes according to the set static sampling interval;

❸

Bluetooth indicator light

Extinguish: No Bluetooth connection；

Blue light on: Bluetooth connection with device;

❹

Power indicator light

Green light on：Electric quantity: 30%-100%；

Blink green：Electric quantity: 10%-30%；

Blink red：Electric quantity:＜10%，beeping sound: interval per second.

Red light on when charging，green light on after charging;

❺Power button

Power button, used to start and close devices

❻

Display

1.45-inch color touch screen, used for interface display and settings;

❶5pin To connect external power supply and external radio

❷Type-C For charging and data transfer

❸SIM NANO SIM Card

8/ 26

2. Technical Specification

2.1. GNSS

● Channels：336

● Signal tracking

Satellite Navigation System Signals

GPS

L1 C/A, L2E, L2C, L5

GLONASS

L1 C/A, L2 C/A, L3 CDMA

BDS

B1, B2, B3

Galileo

E1, E5A, E5B, E5AltBOC, E6

NAVIC

SBAS

L1 C/A, L5

QZSS

L1 C/A, L1 SAIF,L1C, L2C, L5

● Position accuracy

Position Mode

Plane Precision

Elevation

Static

±（2.5+0.1×10

-6

D）mm ±（5+0.4×10

-6

D）mm

RTK

±（8+1×10

-6

D）mm ±（15+1×10

-6

D）mm

● Initialization time: ＜10s

● Initialization reliability: ＞99.9%

9/ 26

● Update rate: up to 50Hz

2.2. System configuration

Operation system Linux

Internal Storage

Bluetooth

32G

BT5.0, BLE

WIFI

Radio

Network (EG25-G)

802.11b, g, n Hotspot / client mode

RX/TX, Power:5W, Frequency: 403-470MHz

Mode

Frequency

LTE FDD B1/B2/B3/B4/B5/B7/B8/B12/B18/B19/B20/B25/B26/B28

LTE TDD

UMTS

B38/B39/B40/B41

B1/B2/B4/B5/B6/B8/B19

GSM

B2/B3/B5/B8

2.3. Tilt Survey

Horizontal precision

30°Rod tip accuracy

60°Rod tip accuracy

0.6mm/⁰Tilt

Within 2cm

Within 5cm

10 / 26

2.4. Weight and Measurement

Weight 1.55KGS

Measurement 154mm x 154mm x 76mm

2.5. Environmental

Work temperature -30℃~+65℃

Stock temperature -40℃~+80℃

Humidity 100% Condensing

Ingress protection IP67

Shock & Vibration

Withstand 2m along with rod drop onto hardwood

floor, 1.2m drop without pole

2.6. Electrical

Power 9-28V DC，2A

Battery

Internal battery，7.2V, 13600mAH,97.92Wh

2.7. Data Interface

5Pin To connect external power supply and external radio

Inhaltsverzeichnis

Andere Geneq Empfänger Handbücher

Geneq

Geneq F90 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung