General GMK-05-MB Bedienungsanleitung
GMK-05-MB
USER GUIDE
www.generallife.com.tr
(M-BUS)
1. GENERAL FEATURES
This guide includes the information of working, featues and how to maket he mounting of GMK-05-MB calorimeter.
GENERAL calorimeter is a measurement device used for measuring the amount of energy and water in systems in
which the water used for energy.
GMK-05-MB includes 2 temperature sensor, ow meter and calculator unit.
GMK-05-MB has communication facility with M-BUS protokol.
2. TECHNICAL DATA
www.generallife.com.tr
Size
Lenght
Wideness
Height
Connection Thread
Sensor Cable
Flow measurement Range
Maximum Pressure
Level of Accuracy
Service Class
Temperature Sensor Type
Mounting Place
Mounting Type
Displayed Step
Battery Life
M-BUS
Practice Standart
DN 20
135 mm
105 mm
100 mm
1"
1,5 m
o
3-75 C
16 Bar
3
A
PT 1000 platin
Return
Vertical or Horizontal
8 steps
6 years
Available
CE ande EN 1434-3/M13 1432 SK 13-019 MI-004
www.generallife.com.tr
3. WORKING PRINCIPLE
There are basically 3 menus in GMK-05-MB calorimeter.
1. Main Menu
2. History Menu
3. Error Menu
All informations are reached by using the prange button on the top of the calorimeter.
The menu is changed by pressing the button for 5 seconds in the way below.
Main Menu- Energy used for total heating (kWh)
History Menu- Menu no ( [2] )
Error Menu- Menu no ( [3] )
The informations in the selected menu is reached respectively by pressing the buton transiently.
If not pressing the buon for 2 seconds, it returns to total used energy in the main menu automacally.
If not pressing the buton for 8 hours, it switches to sleep mode and there becomes nothing on the display. It returns
to total used energy in the main menu when pressing the button.
www.generallife.com.tr
3.1. Main Menu:
1. Energy used for total heating (kWh)
3
2. Total amount of running water (m )
o
3. Inlet water temperature ( C)
o
4. Return water temperature ( C)
o
5. Temperature Difference ( C)
3
6. Instantaneous ow (m /h)
7. Total working term (h)
8. Calorimeter no
9. Energy used for total cooling (kWh)
10. Display test
3.2. History Menu Information:
1. Menu No ([2])
2. Current date info (gg.aa.yy)
3. Past date info (gg.aa.yy)
3.3. Error Menu:
1. Menu no ([3])
2. Error 1 ( Err-1 ): Calculation Error
3. Error 2 ( Err-2 ): Temperature Sensor Error
4. Error 3 ( Err-3 ): Flowmeter Error
5. Total energy used for heating (kWh)
3
6. Total amounth of running water (m )
In this menu, total energy used for heating and total amounth of running water in the end of the last 24
months are displayed. While history information is displayed, total energy used for heating and total
amounth of running water are reached by pressing the button for 5 seconds
In this menu, total enegy used for heating and total amounth of running water at the time of error are
displayed.
While error information (Err-1, Err-2, Err-3) is displayed, error date information (gg.aa.yy.) is reached by pressing
the button for 5 seconds.
When Error-1 occurs, the button becomes unuseable.
When Error-2 occurs, “P1” information is shown on the top of the display.
When Error-3 occurs, “P2” information is shown on the top of the display.
4. MOUNTING
Calorimeter should be mounted horizontally clockwise rotation.
Flow direction of water and arrow mark on the calorimeter should be mounted in the same direction.
There are 2 sensors on the calorimeter.
Red label sensor is used for measuring the temperature of hot water (inlet water),
Blue label sensor is used for measuring the temperature of cold water (return water).
Sensor measuring the temperature of cold water should be mounted on the calorimeter (factory setting).
Sensor measuring the temperature of hot water should be mounted on the side of hot water ow.
In order that the calorimeter can communicate with M-BUS protocol, all calorimeters are connected to only one
2
cable in paralel with 2x0,5 mm cable.
There is not polarity in the cable system.
CRITICAL ALARM!
Slit trap is suggested in the installments where GMC-05-MB calorimeter is
used. The device becomes out of warranty in the errors which occurs when slit
trap is not used!
www.generallife.com.tr
INSTALLATION DIAGRAM
www.generallife.com.tr
TRUE MOUNTING
FALSE MOUNTING
calorimeter
ball valve
BOILER cold water
sensor
ball valvey-strainer
hot water
sensor
sıcaklık sensör girişli
küresel vana
www.generallife.com.tr
WARRANTY RULES
1- Warranty starts with the delivery date and ends after 2 years.
2- All parts of the product are under warrenty of our rm.
3- If product breaks down and gets xed in warranty duration, duration of meintenence adds to the warranty
duration. Products repairment can't exceed 20 work days. This duration starts when the products problem reported
to the seller, agency, producer or the importer unless there is no servise station. Consumer can report the problem
by; fax, e-mail, registered and reply paid letter or a similar way. If a conict happens teh consumer has the
responsibility of proong it. If the problem can't be solved more than 10 days the producer or importer has to supply
a similar device until the solution.
If the product breaks down because of material, label or mounting falults in the warrenty duration, rm won't demand
laber costs, changing parts or any other kind of charge for repairment.
4- If the product breaks down because of material, label or mounting falults in the warrenty duration, rm won't
demand laber costs, changing parts or any other kind of charge for repairment.
5- Despite consumers rights of maintenance;
-If the product breaks down for 4 times in a year or 6 times in warrenty duration and these problems effects main
purpose of the product. (starting from delivery time during warranty.),
- Exceeding the maximum repairing term,
- In the case of not existing service station, determining that repairment is not possible with the report compiled by
respectively service station's seller, dealer, agency, legation, importer or manufacturer.
6- Breakdowns by improper use for the points in the user guide is nonwarrantable.
7- You may apply for Ministry of Custom and Trade and General Directorate of Protection of Costumers and Market
Surveillance in case of the problems about certicate of warranty.
www.generallife.com.tr
Inhaltsverzeichnis
Andere General Messgerät Handbücher
General
General FD08 Bedienungsanleitung
General
General DSMM600 Bedienungsanleitung
General
General DCiS2 iBorescope2 Bedienungsanleitung
General
General MM80G Bedienungsanleitung
General
General MP905 Bedienungsanleitung
General
General DAF3010B Bedienungsanleitung
General
General MMD5NP Bedienungsanleitung
General
General DAMP60 Bedienungsanleitung
General
General CM660 Bedienungsanleitung
General
General RHMG650 Bedienungsanleitung
General
General MMD900 Bedienungsanleitung
General
General DSMM500 Bedienungsanleitung
General
General DM8252 Bedienungsanleitung
General
General MM700D Bedienungsanleitung
General
General PalmScope DCS950 Bedienungsanleitung
General
General DT4208SD Bedienungsanleitung
General
General EP8710 Bedienungsanleitung
General
General HWA4214SD Bedienungsanleitung
General
General MMH800 Bedienungsanleitung
General
General DSM403SD Bedienungsanleitung
