General MM80G Bedienungsanleitung

a scale for wood

moisture

b scalefor

mineral building

materials

c value out of

range indicator

d low battery

charge

indicator

1. 2.

Self-test function

3ON/OFFThis unit switches

into an energy-

saving mode after 3

minutes. To wake up

the unit again, acti-

vate the ON button

2 times. To switch o

the unit, activate the

ON button 1 time.

Lithium battery CR2032

bc d

Mineral building materials

Be aware that walls (or sur-

faces) made of several dierent

materials, or even variations in

the material‘s consistency, can

cause measurement results to

be falsied. Perform multiple

comparative measurements.

Read measurement results

from the right-hand building

materials scale.

Refer to the conversion table

below in order to obtain more

precise measurements for

dierent materials.

5Wood

The location to be measured

should be untreated, free of

knots, dirt and resin.

Measurements should not

be made on the end faces of

wood becausethese areas

dry particularly quickly such

that they produce incorrect

measurement results.

Read measurement results

from theleft-hand wood

moisture scale.

Refer to the conversion table

below in order to obtain more

precise measurements for

dierent materials.

Function/application:This material moisture instrument detects

and evaluates the material moisture content of wood and building

materials by way of electric resistance measurement. The displayed

valueis material moisture in % with respect to dry mass. Example :

100% material moisture for 1 lb of wet wood =.5 lb water.

Measurement procedure notice:

Be sure neither supply lines (electric lines, water pipes, etc) nor a

metal subsurfaceis present at the location tobe measured. Insert

the electrodes as far into the material as possible but never use

excessive or sudden impact force as this could damage the unit.

Always pull the unit out of the material with left/right twisting

motion. Perform several comparative measurements atdie-

rent locations to minimise measurement error.

The sharply pointed electrodes present an injury hazard .Always

put thesafety cap on the unit when it is not in use or being

transported.

Measurement

scale

> 44

Conversion table

all values in material moisture %

28,0

26,0

25,0

24,0

23,5

23,0

22,5

22,0

20,0

19,2

17,8

16,2

15,7

13,8

11,3

23,5

22,0

21,0

20,0

19,6

19,1

18,6

18,0

16,6

15,8

14,6

13,2

12,8

11,0

8,9

1,6

1,5

1,4

1,2

1,1

1,0

2,4

2,1

2,0

1,8

1,2

1,0

0,8

0,5

1,8

1,7

1,6

1,5

1,4

1,3

1,2

10,0

8,0

7,0

6,0

5,7

5,0

4,5

4,0

3,7

3,2

Wet Dry

Table notices:

Measurements indicated on the instrument‘sdual-scale are based

on the common built-in material characteristics for wood and

building materials.More precise results can be obtained forthe

given wood or building material when the indicated measurement

is referenced to the conversion table.

Example: Measurement on the left scale: 24%, corresponds

to 1,2%for gypsum plaster. Values with a grey background are

considered to be wet.

Beech

Spruce/

Oak/

Birch

concrete

Plaster

Cement

screed

Aerated

concrete

General notices:

Functional and operational safety is only warranted when the

instrumentis operated within thespecied climatic conditions

andis only used for those purposes for which it is designed.

Responsibility fortheinterpretation of measurement results and

consequentactions taken lie entirely with theuser.

Warranty

The warranty period is 1year from thedate of purchase. The warranty

covers all material ormanufacturing defects occurring duringthis time.

The following are excluded from warranty: Damage due to improper

use (e.g. operationwith wrong type of current/voltage, connection

to unsuitable powersource,fall onto hardsurface, etc.) or improper

storage, normal wear and tear, and defects which only insignicantly

impair the value or suitability for use. Any tampering by unauthorised

persons will render this warranty void. In the eventthat you need

to claimwarranty, please takethe complete devicetogether with

all information andthe invoiceto one of ourdealers and have them

Technical revisions reserved. 07/08

6 ... 44%

0.2 ... 2.2%

± 2% of full scale measurement

± 0.4% of full scale measurement

2 scales, general wood cha-

racteristic, general mineral buil-

ding materials characteristic

3 x lithium 3 V CR2032

72 °F

14 to 140 °F

32 to 104 °F

85%

Measurement range for

wood and other materials

Building materials measure-

ment range

Accuracy for wood and

other materials

Building materials accuracy

Dual scale

Power supply

Nominal temperature

Permissible storage

temperature

Permissible operating tem-

perature

Permissible max. relative

humidity

Technical data

Inhaltsverzeichnis

Andere General Messgerät Handbücher

General

General PalmScope DCS950 Bedienungsanleitung

General

General DLM112SD Bedienungsanleitung

General

General UV512C Bedienungsanleitung

General

General RHMG650 Bedienungsanleitung

General

General 50-EB-3 Stücklistenhandbuch

General

General XL1 Bedienungsanleitung

General

General PTH8708 Bedienungsanleitung

General

General MMD5NP Bedienungsanleitung

General

General MM9 Bedienungsanleitung

General

General UV513AB Bedienungsanleitung

General

General DPH7011 Bedienungsanleitung

General

General MM700D Bedienungsanleitung

General

General A3G Bedienungsanleitung

General

General DCS1700 Bedienungsanleitung

General

General PCT2236B Bedienungsanleitung

General

General MM8 Bedienungsanleitung

General

General DCFM700 Bedienungsanleitung

General

General EMHT40 Bedienungsanleitung

General

General MM70D Bedienungsanleitung

General

General VOC08 Montageanleitung

General

General CT6235B Bedienungsanleitung

General

General MM1E Bedienungsanleitung

General

General CDM77535 Bedienungsanleitung

General

General DCS1100 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung