Genie S-80 Installations- und Betriebsanleitung

Service and Repair Manual

S-80

from S80/85/80X15-12264

This manual includes:

Repair procedures

Fault Codes

Electrical and

Hydraulic

Schematics

S-85

S-80X

For detailed maintenance

procedures, refer to the

appropriate Maintenance

Manual for your machine.

Part No. 1269074

Rev A

September 2015

Service and Repair Manual September 2015

Introduction

ii S-80 • S-85 • S-80X Part No. 1269074

Intr od ucti o n Intr od ucti o n

Impor ta nt In for m at i on

Important

Read, understand and obey the safety rules and

operating instructions in the appropriate Operator's

Manual on your machine before attempting any

procedure.

This manual provides troubleshooting and repair

procedures for qualified service professionals.

Basic mechanical, hydraulic and electrical skills

are required to perform most procedures. However,

several procedures require specialized skills, tools,

lifting equipment and a suitable workshop. In these

instances, we strongly recommend that

maintenance and repair be performed at an

authorized Genie dealer service center.

Compliance

Machine Classification

Group B/Type 3 as defined by ISO 16368

Machine Design Life

Unrestricted with proper operation, inspection and

scheduled maintenance.

Technical Publications

Genie has endeavored to deliver the highest

degree of accuracy possible. However, continuous

improvement of our products is a Genie policy.

Therefore, product specifications are subject to

change without notice.

Readers are encouraged to notify Genie of errors

and send in suggestions for improvement. All

communications will be carefully considered for

future printings of this and all other manuals.

Internet: www.genielift.com

E-mail: awp.techpub@terex.com

Find a Manual for this Model

Go to http://www.genielift.com

Use the links to locate Operator's, Parts,

Maintenance, and Service and Repair manuals.

1269074 Rev A, September 2015

First Edition, First Printing

"Genie" and "S" are registered trademarks of Terex South

Dakota, Inc. in the USA and many other countries.

September 2015 Service and Repair Manual

Introduction

Part No. 1269074 S-80 • S-85 • S-80X iii

Revision History

Revision

Date

Section

Procedure / Page / Description

A 9/2015

Initial Release

Reference Examples:

Electronic Version

Click on any content or procedure in the Table of Contents to view

the update.

Section – Repair Procedure, 4-2

Section – Fault Codes, All charts

Section – Schematics, Legends and schematics

Service and Repair Manual September 2015

Introduction

iv S-80 • S-85 • S-80X Part No. 1269074

Serial Number Legend

1 Model

2 Model year

3 Sequence number

4 Serial number (stamped on chassis)

5 Serial label (located under cover)

September 2015Service and Repair Manual

Safety Rules

Part No. 1269074 S-80 • S-85 • S-80X v

Section 1 Safet y R ul es Gener al Saf et y R ules

Danger

Failure to obey the instructions and safety rules in

this manual and the appropriate Operator's Manual

on your machine will result in death or serious

injury.

Many of the hazards identified in the operator's

manual are also safety hazards when maintenance

and repair procedures are performed.

Do Not Perform Maintenance

Unless:

You are trained and qualified to perform

maintenance on this machine.

You read, understand and obey:

•manufacturer's instructions and safety rules

•employer's safety rules and worksite

regulations

•applicable governmental regulations

You have the appropriate tools, lifting

equipment and a suitable workshop.

Service and Repair Manual September 2015

Safety Rules

vi S-80 • S-85 • S-80X Part No. 1269074

Personal Safety

Any person working on or around a machine must

be aware of all known safety hazards. Personal

safety and the continued safe operation of the

machine should be your top priority.

Read each procedure thoroughly. This

manual and the decals on the machine,

use signal words to identify the following:

Safety alert symbol

—used to

lert personnel to potential

personal injury hazards. Obey all

safety messages that follow this

symbol to avoid possible injury or

death.

Indicates a imminently hazardous

situation which, if not avoided,

will result in death or serious

injury.

Indicates a potentially hazardous

situation which, if not avoided,

could result in death or serious

injury.

Indicates a potentially hazardous

situation which, if not avoided,

may cause minor or moderate

injury.

Indicates a potentially hazardous

situa

tion which, if not avoided,

may result in property damage.

Be sure to wear protective eye wear and

other protective clothing if the situation

warrants it.

Be aware of potential crushing hazards

such as moving parts, free swinging or

unsecured

components when lifting or

placing loads. Always wear approved

steel

-toed shoes.

Workplace Safety

Any person working on or around a machine must

be aware of all known safety hazards. Personal

safety and the continued safe operation of the

machine should be your top priority.

Be sure to keep sparks, flames and

lighted tobacco away from flammable and

combustible materials like battery gases

and engine fuels. Always have an

approved fire extinguisher within easy

reach.

Be sure that all tools and workin

g areas

are properly maintained and ready for

use. Keep work surfaces clean and free

of debris that could get into machine

components and cause damage.

Be sure any forklift, overhead crane or

other lifting or supporting device is fully

capable of suppor

ting and stabilizing the

weight to be lifted. Use only chains or

straps that are in good condition and of

ample capacity.

Be sure that fasteners intended for one

time use (i.e., cotter pins and self

-locking

nuts) are not reused. These components

may fai

l if they are used a second time.

Be sure to properly dispose of old oil or

other fluids. Use an approved container.

Please be environmentally safe.

Be sure that your workshop or work area

is properly ventilated and well lit.

September 2015

Table of Contents

Part No. 1269074 S-80 • S-85 • S-80X vii

Introduction Introduction...........................................................................................................ii

Important Information ............................................................................................. ii

Find a Manual for this Model .................................................................................. ii

Serial Number Legend .......................................................................................... iv

Section 1 Safety Rules ..........................................................................................................v

General Safety Rules ............................................................................................. v

Section 2Specifications .......................................................................................................1

Machine Specifications...........................................................................................1

Performance Specifications....................................................................................2

Hydraulic Specification ...........................................................................................2

Hydraulic Component Specifications......................................................................4

Manifold Component Specifications .......................................................................5

Continental TME27 Engine Specifications .............................................................6

Deutz TD2011L04i Engine Specifications..............................................................7

Deutz TD 2.9 Engine Specifications.......................................................................8

Perkins 804D-33 Engine Specifications .................................................................9

Perkins 404F-22T Engine Specifications .............................................................10

Machine Torque Specifications ............................................................................11

Hydraulic Hose and Fitting Torque Specifications ...............................................12

Torque Procedure ................................................................................................13

September 2015

Table of Contents

viii S-80 • S-85 • S-80X Part No. 1269074

Section 3 Repair Procedures ............................................................................................. 15

Introduction .......................................................................................................... 15

Platform Controls............................................................................................... 17

1-1 ALC-500 Circuit Board ................................................................................... 17

How to Remove the ALC-500 Circuit Board ................................................... 17

1-2 Joysticks ........................................................................................................ 18

How to Adjust the Joystick Max-out Setting ................................................... 19

How to Adjust the Joystick Ramp Rate Setting .............................................. 20

How to Adjust the Joystick Threshold Setting ................................................ 21

How to Calibrate the Boom Angle Sensor ...................................................... 22

Platform Components ....................................................................................... 24

2-1 Platform.......................................................................................................... 24

2-2 Platform Leveling Slave Cylinder................................................................... 25

How to Remove the Platform Leveling Slave Cylinder ................................... 25

How to Bleed the Slave Cylinder .................................................................... 25

2-3 Platform Rotator............................................................................................. 26

How to Remove the Platform Rotator ............................................................. 26

How to Bleed the Platform Rotator ................................................................. 27

2-4 Platform Overload System............................................................................. 28

Jib Boom Components...................................................................................... 31

3-1 Jib Boom ........................................................................................................ 31

3-2 Jib Boom Lift Cylinder .................................................................................... 32

September 2015

Table of Contents

Part No. 1269074 S-80 • S-85 • S-80X ix

Boom Components ............................................................................................33

4-1 Cable Track ....................................................................................................33

How to Remove the Cable Track, S-80 ..........................................................33

How to Repair the Cable Track .......................................................................35

4-2 Boom ..............................................................................................................35

How to Shim the Boom ...................................................................................35

How to Remove the Boom ..............................................................................36

4-3 Boom Lift Cylinder..........................................................................................38

4-4 Boom Extension Cylinder...............................................................................40

4-5 Boom Extend/Retract Cables.........................................................................42

How to Adjust the Extend/Retract Cables .......................................................42

How to Replace the Boom Extend/Retract Cables .........................................44

4-6 Platform Leveling Master Cylinder .................................................................46

Engines................................................................................................................47

5-1 RPM Adjustment ............................................................................................47

5-2 Flex Plate .......................................................................................................47

How to Remove the Flex Plate........................................................................47

How to Install the Flex Plate............................................................................50

How to install the Pump and Bell Housing Assembly .....................................51

Ground Controls.................................................................................................52

6-1 Control Relays................................................................................................52

Hydraulic Pumps ................................................................................................53

7-1 Function Pump ...............................................................................................53

7-2 Drive Pump.....................................................................................................54

How to Prime the Pump ..................................................................................55

September 2015

Table of Contents

x S-80 • S-85 • S-80X Part No. 1269074

Manifolds ............................................................................................................ 56

8-1 Function Manifold .......................................................................................... 56

8-2 Valve Adjustments - Function Manifold ......................................................... 58

How to Adjust the System Relief Valve .......................................................... 58

How to Adjust the Boom Down Relief Valve................................................... 58

How to Adjust the Boom Extend Relief Valve................................................. 59

8-3 Brake/Two-Speed Manifold Components ...................................................... 60

8-4 Turntable Rotation Manifold Components ..................................................... 61

8-5 Platform Rotate Manifold Components.......................................................... 62

8-6 Platform Manifold Components, S-80............................................................ 63

8-7 Platform Manifold Components, S-85............................................................ 64

8-8 2WD Traction Manifold Components............................................................. 65

8-9 4WD Traction Manifold Components............................................................. 66

8-10 Drive Oil Diverter Manifold Components (welder option) ............................ 68

8-11 Valve Adjustments - Traction Manifold ........................................................ 69

8-12 Valve Coils ................................................................................................... 70

Valve Coil Resistance Specifications ............................................................. 70

How to Test a Coil Diode ................................................................................ 71

Fuel and Hydraulic Tanks ................................................................................. 72

9-1 Fuel Tank ....................................................................................................... 72

9-2 Hydraulic Tank ............................................................................................... 73

Turntable Rotation Components ...................................................................... 75

10-1 Turntable Rotation Drive Hub Assembly ..................................................... 75

How to Remove the Turntable Rotation Drive Hub Assembly........................ 75

How to Remove the Turntable Rotation Hydraulic Motor ............................... 76

How to Adjust the Turntable Rotation Gear Backlash .................................... 77

Andere Handbücher für S-80

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Genie Hubarbeitsbühne Handbücher

Genie

Genie ZX-135/70 with Jib-Extend Bedienungsanleitung

Genie

Genie S Series Bedienungsanleitung

Genie

Genie TMZ-34/19 Bedienungsanleitung

Genie

Genie Z-45 XC Bedienungsanleitung

Genie

Genie GS-1530 Installations- und Betriebsanleitung

Genie

Genie Z-80/60 Installations- und Betriebsanleitung

Genie

Genie S-65 Bedienungsanleitung

Genie

Genie gS-1530/32 Bedienungsanleitung

Genie

Genie Z-45/22 Bedienungsanleitung

Genie

Genie Z-25/8 Bedienungsanleitung

Genie

Genie S-100HD Bedienungsanleitung

Genie

Genie Z-80 Bedienungsanleitung

Genie

Genie Z-40/23N Bedienungsanleitung

Genie

Genie TMZ-50/30 Bedienungsanleitung

Genie

Genie S-60 HC Bedienungsanleitung

Genie

Genie GS-1530 Bedienungsanleitung

Genie

Genie S-80X Bedienungsanleitung

Genie

Genie S-65 XC CE Bedienungsanleitung

Genie

Genie GTH-2306 Service-Handbuch

Genie

Genie Super Tower Bedienungsanleitung

Genie

Genie Super-Straddle Bedienungsanleitung

Genie

Genie Z-135/70 Bedienungsanleitung

Genie

Genie S-105 Bedienungsanleitung

Genie

Genie Z-135/70 Bedienungsanleitung

Beliebte Hubarbeitsbühne Handbücher anderer Marken

JLG

JLG Skytrak 6036 Gebrauchs- und Pflegehandbuch

Terex

Terex Z80H-7733 Bedienungsanleitung

Terex

Terex Gyro 4020 Bedienungsanleitung

Terex

Terex Genie Z-51/30 J Bedienungsanleitung

LGMG

LGMG T65JE Bedienungsanleitung

Oshkosh Corporation

Oshkosh Corporation JLG H800AJ Gebrauchs- und Pflegehandbuch

Oshkosh

Oshkosh JLG 1500SJ Installations- und Benutzerhandbuch

Skyjack

Skyjack SJ30AJE Bedienungsanleitung

Oshkosh

Oshkosh JLG 800A Installations- und Benutzerhandbuch

Terex

Terex Genie Z-135/70 Bedienungsanleitung

Skyjack

Skyjack SJ 46AJ Bedienungsanleitung

Molift

Molift Quick Raiser 205 Bedienungsanleitung

Snorkel

Snorkel SL26RTE Kurzanleitung

Terex

Terex Genie Z-135/70 Installations- und Betriebsanleitung

Terex

Terex Genie ZX-135/70 Installations- und Betriebsanleitung

Oshkosh Corporation

Oshkosh Corporation JLG E300A Bedienungsanleitung

Terex

Terex Genie GTH-3007 Bedienungsanleitung

Skyjack

Skyjack SJ45 T+ Bedienungsanleitung