Genie GS-2669 RT Bedienungsanleitung

Operator's Manual

Serial Number Range

GS™-2669RT

from GS69F-18000

from GS69M-

101

AUS

Australia

GS™-3369RT

GS™-4069RT

with

Maintenance

Information

Original Instructions

Second Edition

Third Printing

Part No. 1305661GT

Operator's Manual Second Edition • Third Printing

GS™-2669RT • GS™-3369RT • GS™-4069RT Part No. 1305661GT

Front Matter

Contents

Introduction ........................................................... 1

Symbol and Hazard Pictorials Definitions............. 5

General Safety ...................................................... 8

Personal Safety................................................... 11

Work Area Safety................................................ 12

Legend ................................................................ 20

Controls............................................................... 21

Inspections.......................................................... 26

Operating Instructions......................................... 37

Transport and Lifting Instructions ....................... 44

Maintenance ....................................................... 47

Specifications...................................................... 51

Second Edition: Third Printing, May 2022

Genie is a registered trademark of Terex South Dakota, Inc. in

the U.S.A. and many other countries.

“GS” is a trademark of Terex South Dakota, Inc.

These machines comply with

AS 1418.10

Second Edition • Third Printing Operator's Manual

Introduction

Part No. 1305661GT GS™-2669RT • GS™-3369RT • GS™-4069RT 1

Introducti on

About this manual

Genie appreciates your choice of our machine for

your application. Our number one priority is user

safety, which is best achieved by our joint efforts.

This book is an operation and daily maintenance

manual for the user or operator of a Genie

machine.

This manual should be considered a permanent

part of your machine and should remain with the

machine at all times. If you have any questions,

contact Genie.

Product Identification

The machine serial number is located on the serial

label.

Serial number stamped

on chassis

Serial label

(located under cover)

Intended Use and Familiarization

Guide

The intended use of this machine is to lift

personnel, including tools, and materials to an

aerial work site. Before operating the machine, it’s

the operator’s responsibility to read and

understand this familiarization guide.

Each person must be trained to operate a

Mobile Elevating Work Platform (MEWP).

Familiarization with the MEWP must be given

to each person who is authorized, competent

and trained.

Only trained and authorized personnel should

be permitted to operate the machine.

The operator is responsible to read,

understand, and obey the manufacturer’s

instructions and safety rules provided in the

Operator’s Manual.

The Operator’s Manual is located in the

manual storage container, at the platform.

For specific product applications, see

Contacting The Manufacturer.

Operator's Manual Second Edition • Third Printing

Introduction

2 GS™-2669RT • GS™-3369RT • GS™-4069RT Part No. 1305661GT

Platform controls symbology and related

machine movement:

Lift function enable button

Outrigger auto level button

(when thumb rocker switch

moved up or down)

Platform up/down (when lift

function selected)

Drive forward/reverse (when

drive function selected)

Steer right/left (when drive

function selected)

Ground controls symbology and related

machine movement:

Lift function enable button

Platform up/down button

Sequential functions and movement:

•Drive and steer.

Interlocked functions:

•Elevated drive speed.

•Elevated drive in an off-level condition.

•All platform and ground controls.

Limitations of use:

•The intended use of this machine is to lift

personnel, including tools, and materials to an

aerial work site.

•Do not elevate the platform unless the machine

is on firm level ground.

Second Edition • Third Printing Operator's Manual

Introduction

Part No. 1305661GT GS™-2669RT • GS™-3369RT • GS™-4069RT 3

Bulletin Distribution and Compliance

Safety of product users is of paramount

importance to Genie. Various bulletins are used by

Genie to communicate important safety and

product information to dealers and machine

owners.

The information contained in the bulletins is tied to

specific machines using the machine model and

serial number.

Distribution of bulletins is based on the most

current owner on record along with their

associated dealer, so it is important to register

your machine and keep your contact information

up to date.

To ensure safety of personnel and the reliable

continued operation of your machine, be sure to

comply with the action indicated in a respective

bulletin.

To view any open bulletins for your machine, visit

us on the web at www.genielift.com.

Contacting the Manufacturer

At times it may be necessary to contact Genie.

When you do, be ready to supply the model

number and serial number of your machine, along

with your name and contact information. At

minimum, Genie should be contacted for:

Accident reporting

Questions regarding product applications and

safety

Standards and regulatory compliance information

Current owner updates, such as changes in

machine ownership or changes in your contact

information. See Transfer of Ownership, below.

Transfer of Machine Ownership

Taking a few minutes to update owner information

will ensure that you receive important safety,

maintenance and operating information that

applies to your machine.

Please register your machine by visiting us on the

web at www.genielift.com or by calling us toll free

at 1-800-536-1800.

Operator's Manual Second Edition • Third Printing

Introduction

4 GS™-2669RT • GS™-3369RT • GS™-4069RT Part No. 1305661GT

Danger

Failure to obey the instructions and

safety rules in this manual will result

in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator’s

manual.

1 Avoid hazardous situations.

Know and understand the safety rules

before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey the

manufacturer’s instructions and safety rules—

safety and operator’s manuals and machine

decals.

You read, understand and obey employer’s

safety rules and worksite regulations.

You read, understand and obey all applicable

governmental regulations.

You are properly trained to safely operate the

machine.

Safety Sign Maintenance

Replace any missing or damaged safety signs.

Keep operator safety in mind at all times. Use mild

soap and water to clean safety signs. Do not use

solvent-based cleaners because they may

damage the safety sign material.

Hazard Classification

Decals on this machine use symbols, color coding,

and signal words to identify the following:

Safety alert symbol

—

used to alert

you to

potential personal injury

hazards. Obey all safety

messages that follow this symbol

to avoid possible injury or death.

Indicates a hazardous situation

which, if not avoided, will result in

death or serious injury.

Indicates a hazardous

situation

which, if not avoided, could result

in death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in minor or moderate injury.

Indicates a property damage

message.

Second Edition • Third Printing Operator's Manual

Symbol and Hazard Pictorials Definitions

Part No. 1305661GT GS™-2669RT • GS™-3369RT • GS™-4069RT 5

Symbol and Hazard Pic torials Definiti ons

Read the operator’s

manual

Read the service

manual

Crush hazard Crush hazard Collision hazard

Tip-over hazard Tip-over hazard Tip-over hazard Tip-over hazard Electrocution hazard

Electrocution hazard Explosion hazard Fire hazard Burn hazard Skin injection hazard

Engage safety arm Keep away from

moving parts

Keep clear of

outriggers and tires

Move machine to level

ground

Close chassis tray

Operator's Manual Second Edition • Third Printing

Symbol and Hazard Pictorials Definitions

6 GS™-2669RT • GS™-3369RT • GS™-4069RT Part No. 1305661GT

Lower the platform. Do not set up where it

cannot be leveled with

outriggers

Maintain required

clearance

Access by trained and

authorized personnel

only

Use a piece of

cardboard or paper

to search for leaks

Chock the wheels Release brakes Tiedown Lanyard anchorage

points

No smoking

Wheel load Transport diagram Manual force Wind speed Outrigger load

Second Edition • Third Printing Operator's Manual

Symbol and Hazard Pictorials Definitions

Part No. 1305661GT GS™-2669RT • GS™-3369RT • GS™-4069RT 7

Voltage rating for

power to platform

Pressure rating for air

line to platform

Maximum capacity Fall hazard Platform overloaded

Crushing hazard Auxiliary lowering

Operator's Manual Second Edition • Third Printing

General Safety

8 GS™-2669RT • GS™-3369RT • GS™-4069RT Part No. 1305661GT

General Safety

Andere Handbücher für GS-2669 RT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Genie Hebesystem Handbücher

Genie

Genie Z-25/8 Bedienungsanleitung

Genie

Genie GTH-1544 Installations- und Betriebsanleitung

Genie

Genie S-65 Bedienungsanleitung

Genie

Genie ZX-135/70 with Jib-Extend Installations- und Betriebsanleitung

Genie

Genie GCL-MT Bedienungsanleitung

Genie

Genie gS-1530/32 Bedienungsanleitung

Genie

Genie Z-45/25 Bedienungsanleitung

Genie

Genie Super Tower ST-20 Bedienungsanleitung

Genie

Genie GS-1530 Bedienungsanleitung

Genie

Genie GTH-2506 Stage A Bedienungsanleitung

Genie

Genie DPL-25S Bedienungsanleitung

Genie

Genie Z-45J Bedienungsanleitung

Genie

Genie Z-45/25 Bedienungsanleitung

Genie

Genie ZX-135/70 with Jib-Extend Bedienungsanleitung

Genie

Genie SX-180 Bedienungsanleitung

Genie

Genie GS-2632 Einrichtungshandbuch

Genie

Genie GS-2046 Bedienungsanleitung

Genie

Genie S-60 HC Bedienungsanleitung

Genie

Genie 33547 Operators Bedienungsanleitung

Genie

Genie GS-3384 Installations- und Betriebsanleitung

Genie

Genie Z-30/20N Installations- und Betriebsanleitung

Genie

Genie Z-30/20N Bedienungsanleitung

Genie

Genie Lift Tools GS-2669 Bedienungsanleitung

Genie

Genie AWP Super Series Bedienungsanleitung

Beliebte Hebesystem Handbücher anderer Marken

morse

morse 82H-124 Bedienungsanleitung

Braun

Braun NL955 Series Bedienungsanleitung

haacon

haacon 1889.10 Bedienungsanleitung

Protekt

Protekt AT 252 Bedienungsanleitung

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Bedienungsanleitung

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Bedienungsanleitung

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Bedienungsanleitung

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Bedienungsanleitung

Custom Equipment

Custom Equipment Hy-Brid 3 Series Programmierhandbuch

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Programmierhandbuch

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Programmierhandbuch

BERG

BERG BeNomic EasyLeaf Bedienungsanleitung

Powermate

Powermate LiftGate LG-3 Bedienungsanleitung

Snorkel

Snorkel TM12 Series Bedienungsanleitung

Terberg

Terberg OMNIDEKA Bedienungsanleitung

Harmar Mobility

Harmar Mobility AL625 Betriebsanleitung

Rotary

Rotary SPO16 Bedienungsanleitung

Ricon

Ricon Mirage F9T Bedienungsanleitung