The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE
Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference
at their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
This Infra-Red illuminator should only be installed by qualified personnel.
There are no user serviceable parts inside.
Do not disassemble this illuminator other than to make initial adjustments.
Only use a CE approved regulated AC24V (Genie PSU24/2) or DC12V (Genie
PSU35SM) power supply
Use appropriate low voltage power cable to prevent fire or electrical shock
Ensure your chosen installation location is able to support the weight of the illuminator,
and that adequate fixing screws are used.
CAUTION : To prevent electric shock and risk of fire hazards:
• Do NOT use power sources other than those specified.
