GeoVision GV-IRCAM 10M EIA AC24V Bedienungsanleitung
GV-IRCAM
Installation Guide
© 2008 July GeoVision Inc. All rights reserved. IRCAMV10-B
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
(10-Meter / 20-Meter Models)
GV-IRCAM offers a selection of models that support different power supplies, optimal
distances and video formats to meet various needs.
GV-IRCAM 10M EIA DC12V / GV-IRCAM 10M CCIR DC12V
GV-IRCAM 20M EIA DC12V / GV-IRCAM 20M CCIR DC12V
AC Power Cable x 1
Power Adapter (100-240V, 12V/3A) x 1
Outdoor Mounting Bracket x 1
GV-IRCAM 10M EIA AC24V / GV-IRCAM 10M CCIR AC24V
GV-IRCAM 20M EIA AC24V / GV-IRCAM 20M CCIR AC24V
Outdoor Mounting Bracket x 1
Models
Packing List
Model
GV-IRCAM 10M EIA AC24V
GV-IRCAM 10M EIA DC12V
GV-IRCAM 20M EIA AC24V
GV-IRCAM 20M EIA DC12V
GV-IRCAM 10M CCIR AC24V
GV-IRCAM 10M CCIR DC12V
GV-IRCAM 20M CCIR AC24V
GV-IRCAM 20M CCIR DC12V
Power Supply
AC
DC
AC
DC
AC
DC
AC
DC
Optimal Distance
10 M
20 M
10 M
20 M
Video Format
NTSC
PAL
Installing Camera Module
Push the sun shield forward to align
with the back of camera enclosure.
1. Slightly lift the camera module and
slide it out completely.
4.
Remove the foam.5.
For the users of all 10-meter models,
skip Steps 6 to 10 and continue to
Step 11.
*
2.
Pull out the camera module.
Sun Shield
Camera Enclosure Back
Camera Module
Completely slide the camera
module out
Loosen the set screws on the back of
the camera enclosure.
3.
On the back of the pedestal, loosen the
screw of the camera.
6.
A CS mount lens adaptor is attached to
the camera. Mount it between the lens
and the camera.
7.
Mount the camera onto the pedestal
and align the lens with LED.
9.
Screw the camera on the pedestal.10.
Loosen the screw cap on the right.
Continued on the reverse >>
11.
8.
CS Mount Lens Adaptor
Remove the lens caps.
Specifications
Model
Distance (optimal)
Sensor
Resolution
Lens Focal Length
Construction
Protection classification
Environmental
Power Supply
Power Consumption
LED Quantity
Illumination Range
Illumination View Angle
Illuminator Life
GV-IRCAM 10M
7~15M
1/3" B/W EXview CCD
600 TVL
5 ~ 50 mm, 10X
Robust aluminum with weatherproof sun-shield
IP 66
Operation: -20˚C ~ 50˚C
Storage: -30˚C ~ 60˚C
AC 24V / DC 12V
15W
12 high-efficiency
reflex LED
20M (object of view
reflecting IR light)
30˚
25,000 hrs
GV-IRCAM 20M
15~25M
10 ~ 120 mm, 12X
20W
24 high-efficiency
reflex LED
30M (object of view
reflecting IR light)
The camera has its own default settings.
See details in the chart below.
Adjusting Camera Settings
ME
FL
BLCOFF
AUTO IRIS
AI SHUT
Pk
SUPERAGC
r
AE
FLOFF
BLC
CCD-I
NORM
Av
NAGC
r=.45
For the DC model users, plug the
power cable into the DC jack.
For the AC model users, connect the
two power cables to the AC power
supply.
17.
Adjust the length of the cable, seal it
with the waterproof tape and then
tightly screw the cap (see Steps 14 and
15 for the pictures).
18.
You can also change the settings to suit different needs. The charts below provide
you an overview of how you can adjust the settings.
Note: The default settings are marked with (*).
Important: The gray areas in the charts are not recommended for use.
Overview of Settings Adjustment
Shutter Speed Settings
Gain Control Settings
Auto Iris Selection
SHUTTER SPEED
1/50(1/60) SEC
1/120(1/100)SEC
1/250 SEC
1/500 SEC
1/1000 SEC (*)
1/2000 SEC
1/4000 SEC
1/10000 SEC
GAIN
0 dB
6 dB (*)
12 dB
18 dB
AE/ME
ME
ME
ME
ME
Av
Pk
Av
Pk
NAGC
NAGC
SUPERAGC
SUPERAGC
AE/ME
ME
ME
ME
ME
ME
ME
ME
ME
FLOFF
FL
FLOFF
FL
FLOFF
FL
FLOFF
FL
BLC
BLC
BLCOFF
BLCOFF
BLC
BLC
BLCOFF
BLCOFF
CCD-I
CCD-I
CCD-I
CCD-I
AUTO IRIS
AUTO IRIS
AUTO IRIS
AUTO IRIS
DC VIDEO
After the installation of camera module
and settings adjustment, you are now
ready to install the camera enclosure
back.
Installing Camera Enclosure
Align the camera module to the
camera enclosure and slide it back.
3.
Secure the camera enclosure with the
screws on both sides.
4.
Push the sun shield back.5.
1. Adjust the lens focus.
2. Lift the camera module.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: +886-2-8797-8377
Fax: +886-2-8797-8335
http://www.geovision.com.tw
VIDEO OUT Jack
For the DC model users, attach the
video cable to the BNC connector and
plug it into the “VIDEO OUT” jack.
For the AC model users, attach the
video cable to the BNC connector and
plug it into the “MONI. OUT” jack.
13.
Insert the video cable through the
screw cap and the inside rubber of the
cap.
12. Adjust the length of the video cable and
seal it with the waterproof tape.
14.
Tightly screw the cap.15.
Loosen the screw cap on the left, insert
the power cable through the screw cap
and the inside rubber.
16.
MONI. OUT Jack
Rubber
Screw Cap
Dieses Handbuch passt für folgende Modelle
7
Andere GeoVision IP-Kamera Handbücher
GeoVision
GeoVision GV-BX120D series Bedienungsanleitung
GeoVision
GeoVision GV-LPR1200 Bedienungsanleitung
GeoVision
GeoVision GV-3D People Counter V2 Bedienungsanleitung
GeoVision
GeoVision GV-BX320D-0 Bedienungsanleitung
GeoVision
GeoVision GV-BX120D series Bedienungsanleitung
GeoVision
GeoVision GV-IPCAM Bedienungsanleitung
GeoVision
GeoVision GV-LPC2210 Bedienungsanleitung
GeoVision
GeoVision GV-IPCAM Bedienungsanleitung
GeoVision
GeoVision GV-Fisheye Bedienungsanleitung
GeoVision
GeoVision GV-Fisheye GV-FE110 Bedienungsanleitung
GeoVision
GeoVision GV-EBD2702: GV-EBD4700 Bedienungsanleitung
GeoVision
GeoVision GV-Fisheye GV-FE421 Bedienungsanleitung
GeoVision
GeoVision GV-BX1500-1F Bedienungsanleitung
GeoVision
GeoVision GV-ABL Series Bedienungsanleitung
GeoVision
GeoVision ICH264TG2V10 Bedienungsanleitung
GeoVision
GeoVision GV-VD120D Bedienungsanleitung
GeoVision
GeoVision GV-PTZ010D Bedienungsanleitung
GeoVision
GeoVision GV-BX1200-0F Bedienungsanleitung
GeoVision
GeoVision GV-BL130D Bedienungsanleitung
GeoVision
GeoVision GV-BL120D Bedienungsanleitung
