Gibson 315547 Bedienungsanleitung

INSTRUCTION MANUAL

CAT BACK 4” SINGLE EXHAUST

SILVERADO, SIERRA TRUCK 2500HD/

3500 6.0L, 8.1L, 2/4WD

EXTENDED CAB, LONGBED CREWCAB, SHORTBED & LONGBED

PART # 315547

ITEM PART # QUANTITY DESCRIPTION

A 700328 1 3” PSGR. HEADPIPE W/WELDED HANGER

B 700329 1 3” DRIVER SIDE HEADPIPE

C 788050 1 SUPERFLOW MUFFLER

D 700545 1 4” OVERAXLE TAILPIPE

E 700542 1 4” EXIT PIPE

F 500401 1 5” STAINLESS TIP

G OHD300 4 3” CLAMPS

H 4228 1 BAND CLAMP

I 4171 2 4” CLAMP

J BO-1015 1 BOLT KIT FOR BAND CLAMP

THANK YOU FOR CHOOSING OUR GIBSON PERFORMANCE EXHAUST FOR YOUR VEHICLE. IF YOU

NEED FURTHER ASSISTANCE, PLEASE DO NOT HESITATE TO CALL OUR TECHNICAL DEPARTMENT

AT (800) 528-3044, MONDAY THROUGH FRIDAY,

8:00 AM TO 5:00 PM.

EXHAUST INSTALLATION #315547

WHEN INSTALLING THIS EXHAUST SYSTEM MAKE SURE TO USE PROPER SAFETY

PRECAUTIONS. USE JACK STANDS WHEN UNDER THE TRUCK, SET PARKING BRAKE, BLOCK

TIRES AND USE SAFETY GLASSES AND GLOVES.

DO NOT WORK WITH HOT PIPES!!!

SUGGESTED TOOLS

9/16”, 1/2” SOCKET & WRENCH, JACK STANDS, WD-40, HACKSAW OR SAWZALL

LAY OUT THE EXHAUST AND COMPARE PART NUMBERS WITH THE DRAWING

TO REMOVE STOCK EXHAUST,

CUT 13” FROM THE FRONT OF

THE MUFFLER, MEASURE

TOWARDS THE FRONT OF THE

VEHICLE. LEAVE ALL RUBBER

GROMMETS ON THE HANGER.

USE WD-40 TO AID IN THE

REMOVAL OF EXHAUST AND

HANGERS. SUPPORT THE

CATALITIC CONVERTER

BEFORE CUTTING.

SLIDE PASSENGER SIDE

HEADPIPE #A ONTO STOCK

HEADPIPE. INSERT WELDED

HANGER INTO RUBBER

GROMMET. NEXT INSTALL

DRIVERS SIDE HEADPIPE #B

ONTO STOCK HEADPIPE, USE

CLAMP #G TO SECURE BOTH

HEADPIPES, DO NOT TIGHTEN.

SLIDE MUFFLER #C ONTO

HEADPIPES 1-1/2” TO 2”.

USE A JACK STAND TO

SUPPORT MUFFLER.

MAKE SURE YOU HAVE A MINIMUM OF A 1” CLEARANCE AWAY FROM ALL RUBBER BRAKE

LINES, TIRES, SHOCKS, FUEL LINES, ETC.

NEXT, INSTALL BAND

CLAMP # H ONTO

MUFFLER INSERT HANGER

INTO RUBBER GROMMET.

USE BOLT KIT PROVIDED

FOR BAND CLAMP, DO

NOT TIGHTEN.

NEXT, INSTALL

OVERAXLE TAILPIPE

# D INTO MUFFLER

1-1/2”- 2”. USE CLAMP

# I TO SECURE PIPE TO

MUFFLER, DO NOT

TIGHTEN.

SLIDE EXIT PIPE # E

ONTO OVERAXLE

TAILPIPE INSERT

WELDED HANGER

INTO RUBBER

GROMMET. USE

CLAMP # I TO SECURE

PIPES TOGETHER. DO

NOT TIGHTEN. ROTATE

PIPE UNTIL LEVEL.

INSTALL YOUR

STAINLESS TIP TO

YOUR DESIRED LOOK,

THEN GO BACK AND

TIGHTEN ALL CLAMPS,

NUTS, AND BOLTS.

Andere Gibson Autozubehör Handbücher

Gibson

Gibson 615549 Bedienungsanleitung

Gibson

Gibson 619650 Bedienungsanleitung

Gibson

Gibson 69202 Bedienungsanleitung

Gibson

Gibson 619900 Bedienungsanleitung

Gibson

Gibson 65500 Bedienungsanleitung

Gibson

Gibson GP312S-C Bedienungsanleitung

Gibson

Gibson 315555L Bedienungsanleitung

Gibson

Gibson 315530 Bedienungsanleitung

Gibson

Gibson 615555L Bedienungsanleitung

Gibson

Gibson 316584 Bedienungsanleitung

Gibson

Gibson 69202D Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung