Glacier bay 67576W-6001 Montageanleitung

THANK YOU

INSTALLATION AND CARE GUIDE

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM

TWO-HANDLE LAVATORY FAUCET

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this lavatory

faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see

our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

8/2015 REV.01YOW

Model#

67576W-6001

67576W-6004

SKU#

703463

703471

Table of Contents

Safety Information....................................2

Warranty ...................................................2

Pre-Installation.........................................2

Planning Installation ..............................2

Tools Required .......................................2

Package Contents..................................3

Installation................................................4

Operation...................................................9

Care and Cleaning ....................................9

Service Parts

...........................................

Safety Information

Please read and understand this entire manual before

attempting to assemble, operate, or install the product. CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.

Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer

purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for

more details.

Adjustable

wrench

Safety

goggles

Phillips

screwdriver

SILICONE

Silicone (2) Supply

lines

Basin

wrench

Pre-Installation

PLANNING INSTALLATION

TOOLS REQUIRED

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents section. If any part is missing or damaged, do not attempt to install the product.

Pre-Installation (continued)

PACKAGE CONTENTS

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Part Description Quantity

A 1

B Hot end valve 1

C Cold end valve 1

Quick connect

assembly 1

Spout assembly

D 2

E Nut 2

F Screw 4

Washer

G 1

Washer

Nut

1Stopper

1Flange

1Gasket

1Nut

1Pop-up body

1Clip

1Horizontal rod

2Button

1Strap

2Slip joint

Part Description Quantity

1Clip

U1Lift rod assembly

Installation

1 Installing the spout assembly

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

□Shut off the water supply.

□Place the spout assembly (A) through the middle

mounting hole in the sink.

□Secure the spout assembly (A) with the washer

(G) and the nut (H). Use the basin wrench to

tighten the nut (H).

2 Connecting the hot and cold

valves

□Slide the hot and cold end valves (B & C) through

the sink mounting holes. Make sure the long

tubes are installed away from the spout

assembly (A).

□Secure the end valves (B & C) with the washers

(D) and the nuts (E). Hand tighten the nuts (E)

onto the end valve (B & C) shanks. Lock the nuts

(E) into position by tightening the screws (F) with

a phillips screwdriver.

□If the handle seat is not aligned with handle in

a line as shown in the above diagram (1), rotate

the handle seat back (the ratating angle can not

exceed 90°) to make the handle seat align with

handle in a line.

NOTE: The hot side end valve is labeled.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

3 Connecting the hose

□Align the tabs (1 & 2) on the quick connect

assembly (I).

□Push the quick connect assembly (I) rmly

upward and snap it onto the receiving tube tab.

Pull down moderately to ensure the connection

has been made.

4 Making the waterline

connections

NOTE: The hot side inlet tube is indicated by a label.

If the label is not present, the hot supply tube is the longer

of the two inlet tubes.

□Use 1/2 in. I.P.S. faucet connections (2), or use

supply line coupling nuts (3) (not included) with

a 3/8 in. O.D. ball-nose riser (1).

NOTE: Before tightening the faucet connector to the water

supply, apply a second wrench to the supply tube tting.

This will prevent the supply tube from moving or twisting

when tightening the faucet connector. Do not overtighten.

Installation (continued)

5 Preparing the pop-up assembly

□Remove the stopper (J) and ange (K).

□Screw the nut (M) all the way down, and push

the gasket (L) down.

6 Installing the pop-up body and

pop-up flange

□Apply silicone to the underside of the ange (K).

□Insert the pop-up body (N) into the sink. Screw

the ange (K) onto the pop-up body (N). The

pivot hole (1) must face the back of the sink.

□Use the groove joint pliers to tighten the nut (M),

but do not over tighten. Do not turn the pop-up

body (N) while tightening the nut (M) or the

sealant may not seal properly. Clean away any

excess putty.

□Open the easy install rotating clip (O).

SILICONE

Open

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

7Installing the horizontal rod,

stopper, and strap

□Install the horizontal rod (P) and stopper (J), as

shown (1) and (2). Make sure the horizontal

rod (P) insert into the pop-up body (N)

completely, as shown (3).

□Close the easy install rotating clip (O).

8 Adjusting the length of

horizontal rod

□If the horizontal rod (P) is too long, as shown in

Fig 1, the length can be adjusted.

□After the plastic portion is positioned properly,

reinstall the clip (T) as shown in Fig 3

□Remove the clip (T) from the horizontal rod (P).

Slide the plastic portion of the rod to adjust to the

desired length. The excess length (1) can be

removed by snapping off with pliers at the

perforated segment, or cut off with a saw.

NOTE: If the horizontal rod of the pop-up assembly is too

long, do not cut, it can be adjusted.

Fig 2

Fig 1

Wall

Fig 3

Installation (continued)

9 Installing the lift rod

10 Remove the quick connector

□If it is necessary to remove the quick connector

(1), squeeze the tabs (2) on the quick connector

and then pull down to disconnect.

Squeeze

Pull

down

□Push the pivot rod (P) to the down position until

the stopper (J) is completely open. Press the

button (Q) on the slip joint assembly (R) and

adjust the vertical rod (S) up or down and front

or back along the pivot rod (P) until the vertical

rod (S) is in the correct position to engage with

the lift rod (U). Press lift rod (U) into the top of the

vertical rod (S) until it engages.

□Operate the lift rod (U) up and down to verify that

the stopper opens and closes correctly.

□Slide the lift rod (U) through the faucet

assembly (A) until the knob rests on the faucet

assembly.

Care and Cleaning

□

□Do not use abrasive cleaners when cleaning this faucet.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

1Flushing and checking for leaks

□Turn on the water supply and allow both hot

and cold water to run for at least one minute

each. This ushes away any debris that could

cause damage to internal parts.

□While the water is running, check for leaks.

□Turn off the water and replace the aerator.

Operation

IMPORTANT: After installation is complete, remove the

aerator with the coin (AA) to ush the water lines.

Service Parts

*Specify Finish

Part Description Part Number

RP20036

2Bonnet RP70193

Nut RP56059

Screw RP50004

Aerator RP30209

Cartridge (C)

Block RP70421

Easy install drain

assembly less body RP40193

Part Description Part Number

Nut RP56073

O-ring RP60002

Quick connect

assembly RP70430

Easy install

drain body RP40192*

Washer RP64147

Easy install drain

assembly RP40191*

17 Lift rod & lift rod knob RP40184*

Washer RP70228

Cartridge (H) RP20035

Handle RP13322*

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Glacier bay Küchen- und Badezimmerausstattung Handbücher

Glacier bay

Glacier bay HD67896W-1101 Bedienungsanleitung

Glacier bay

Glacier bay HD67551-1508D2 Montageanleitung

Glacier bay

Glacier bay HD67529W-6201 Montageanleitung

Glacier bay

Glacier bay HD67865W-6001 Montageanleitung

Glacier bay

Glacier bay 67257W-0108D2 Montageanleitung

Glacier bay

Glacier bay 461-3001 Montageanleitung

Glacier bay

Glacier bay MCKENNA HD67726W-120602 Montageanleitung

Glacier bay

Glacier bay EAGLETON HD67540-1010H Montageanleitung

Glacier bay

Glacier bay HD67573W-6001 Montageanleitung

Glacier bay

Glacier bay VDR2522A1 Bedienungsanleitung

Glacier bay

Glacier bay HD67726W-1208D2 Montageanleitung

Glacier bay

Glacier bay F51A0074CP Montageanleitung

Glacier bay

Glacier bay FW6AC012CP Montageanleitung

Glacier bay

Glacier bay Carla HD67826-0008D2 Montageanleitung

Glacier bay

Glacier bay F5121054CP Montageanleitung

Glacier bay

Glacier bay HD67763W-5091 Montageanleitung

Glacier bay

Glacier bay HD67772W-5091 Montageanleitung

Glacier bay

Glacier bay HD67824X-5001 Montageanleitung

Glacier bay

Glacier bay 873W-6101 Montageanleitung

Glacier bay

Glacier bay 13-0093-W-GB Bedienungsanleitung

Glacier bay

Glacier bay HD67496-1008D2 Montageanleitung

Glacier bay

Glacier bay HD67307W-6101 Montageanleitung

Glacier bay

Glacier bay HD67030W-7001 Montageanleitung

Glacier bay

Glacier bay HD873X-3601 Montageanleitung

Beliebte Küchen- und Badezimmerausstattung Handbücher anderer Marken

Grohe

Grohe BRIDGEFORD 33 870 Bedienungsanleitung

Hans Grohe

Hans Grohe Zenio Metro 31811000 Bedienungsanleitung

Gröne

Gröne Zedra 32 555 Bedienungsanleitung

Transform

Transform QL045 Bedienungsanleitung

Sanela

Sanela SLU 09PTB Bedienungsanleitung

Lefroy Brooks

Lefroy Brooks C1-1400 Montageanleitung

Grohe

Grohe Rapido E Bedienungsanleitung

Danze

Danze D302455 Bedienungsanleitung

Waterworks

Waterworks CEKM30 Merkblatt

Helvex

Helvex Omega TV-298 Bedienungsanleitung

Tribata.

Tribata. GEORGIAN G5393 Bedienungsanleitung

Alpha Bidet

Alpha Bidet Alpha One Bedienungsanleitung

InSinkErator

InSinkErator H/HC3300 Installationshandbuch

Clou

Clou Xo type 1 Bedienungsanleitung

Kohler

Kohler Contra 26448T-4 Bedienungsanleitung

Grohe

Grohe Bridgeford 20 158 Bedienungsanleitung

Hans Grohe

Hans Grohe Croma Select S 180 Showerpipe EcoSmart... Bedienungsanleitung

Wickes

Wickes MONO SINK MIXER Bedienungsanleitung