Glacier bay Carla HD67826-0008D2 Montageanleitung

THANK YOU

INSTALLATION AND CARE GUIDE

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM/GLACIERBAY

Model#

HD67826-0008D2

PULL-DOWN KITCHEN FAUCET

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this kitchen

faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see

our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

4/2017 REV.01THD

SKU#

1002541817

Table of Contents

Important Information..............................2

Warranty ...................................................2

Pre-Installation.........................................2

Planning Installation ..............................2

Package Contents ..................................3

Installation................................................4

Care and Cleaning ....................................8

Troubleshooting........................................8

Service Parts

...........................................

Important Information

□ Observe all local plumbing and building codes.

□ Cover the sink drain to avoid losing any parts.

□ Review the care and cleaning section included in this guide.

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that prove defective.

Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer

purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for

more details.

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents list. If any part is missing or damaged, do not attempt to install the product. Contact Customer Service

for replacement parts..

TOOLS AND HARDWARE REQUIRED

Adjustable

wrench

Safety

goggles

Tools and Hardware Required ...............2

Operation...................................................7

Phillips

screwdriver

SILICONE

Silicone

sealant

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

G Escutcheon 1

H 2Bolt

I Gasket 1

J 2Mounting nut

K Weight 1

L Weight clip 1

Part Description Quantity

A 1

B Rubber washer 1

C Metal washer 1

D Nut 1

E Screw 2

Faucet assembly

F 1Quick connector

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Installation

1 Installing the faucet assembly

CAUTION: Always shut off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle

to relieve water pressure and ensure that the water is completely shut off.

NOTE: This step is for escutcheon installation (optional).

If the sink is uneven, use silicone under the gasket (I).

□Screw the bolts (H) into the escutcheon (G) and

ensure that the gasket (I) is pressed onto the

escutcheon (G) before the escutcheon (G) is

installed over the three holes in the sink.

□Insert the faucet assembly (A) through the hole

in the escutcheon (G).

□Secure the escutcheon (G) to the sink using the

mounting nuts (J) provided. Hand tighten only.

□Shut off the water supply. Remove the old faucet. Clean the mounting surface.

□Unscrew the nut (D), and remove the washers (B & C).

□Insert the faucet assembly (A) through the hole

in the sink.

NOTE: This step is for no escutcheon installation (optional).

Installation (continued)

2 Securing the faucet assembly

□Install the rubber washer (B), and metal

washer (C) onto the threaded mounting shank.

□Thread the nut (D) onto the mounting shank.

Lock the nut (D) into position by tightening the

screws (E). Do not overtighten.

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

3 Attaching the quick connector

to the receiving block

□Push the quick connector (F) rmly upward and

attach it to the receiving block (1). Pull down

moderately to ensure the connection has been

made.

Installation (continued)

4 Installing the weight

□Insert the weight (K) onto the clip (L) by sliding

it down onto the clip (L).

□Install the weight clip (L) at the point of the

hose marking “weight here”.

5Making the water supply

connections

□Thread the nut (1) on the supply line onto the

outlet of the water supply valve (2) and tighten

with a wrench. Do not overtighten.

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

other and damaging.

Weight

here

Weight

here

7 HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Operation

1Flushing and checking for leaks

□Pull the hose assembly out of the spout and

remove the spray head by unscrewing it from

the hose in a counterclockwise direction. Be

sure to hold the end of the hose down into the

sink and turn the faucet to the warm position

where it mixes hot and cold water.

□Flush the water lines for one minute. This ushes

away any debris that could cause damage to

internal parts. Check for leaks.

□Re-tighten any connections if necessary, but do

not overtighten. Reinstall the spray head by hand

tightening it back onto the spray hose in a

clockwise direction.

IMPORTANT: After installation is completed, turn on the

hot and cold water supplies. Check for leaks. Do not lose

the gasket (1) in the hose.

2Removing the quick connector

□If it is necessary to remove the quick connector

(1), squeeze the tabs (2) on the quick connector

and then pull down to disconnect.

Squeeze

Pull

down

Care and Cleaning

□To clean, wipe down with a damp cloth and dry with a towel.

Troubleshooting

Problem Possible Cause Solution

There are leaks

underneath the handle.

The bonnet nut has come loose and the

o-ring on the cartridge is dirty or damaged.

□Tighten the bonnet nut. Clean

or replace the o-ring.

The aerator leaks or has

an inconsistent water

ow pattern.

The aerator is dirty or mistted.

The cartridge may be clogged.

□Remove the aerator and check

for debris in the aerator screens.

□Remove the cartridge and check

for debris.

□Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will

be voided.

NOTE: Refer to the service parts section in this manual for

a detailed drawing showing the location of the parts listed

below.

□Ensure the aerator is properly

installed.

There are leaks from the

hose underneath the deck.

The hose and discharge tube connection

may be loose.

□Tighten the connection between

the discharge tube and hose.

The hose does not retract. The weight is not installed in the

appropriate position.

□Reinstall or readjust the weight.

The water pressure is low. The connector underneath the deck is

clogged with debris.

The aerator is clogged.

□Turn off the water supply and

disconnect the connector

/ aerator.

□Unscrew the connector / aerator

and clean under running water.

□Screw the connector / aerator

back.

□Test water ow. If water

pressure is still low then replace

the connnector / aerator.

There is no hot or cold

water.

The water inlet hose was acccidentally

kinked during installation and is limiting

the water ow through.

□Reinstall the water inlet hose.

Service Parts

*Specify Finish

Many replacement cartridges, aerators, and drain

assemblies can be purchased at your local The

Home Depot store or online at HOMEDEPOT.COM

Part Description Part Number

1RP38354*

4 Cartridge & Screw RP20094

5 Bonnet nut RP70533

6 Cap RP80028*

7 Handle assembly RP13552*

8 Rubber washer RP64023

9 Metal washer RP64024

10 Nut & Screw RP56123

15 Block RP70421

Spray head and Hose

16 O-ring RP60002

Part Description Part Number

17 Quick connect

assembly RP70479

18 O-ring RP60089

19 Weight RP70525

20 Weight clip RP70590

12 Bolt RP50071

13 Gasket RP80623

14 Mounting nut RP56109

2RP60071O-ring

3RP70380Wearable ring

Faucet ID tags can

be found on the

hot water inlet

11 Escutcheon RP80491*

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM/GLACIERBAY

Retain this manual for future use.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Glacier bay Küchen- und Badezimmerausstattung Handbücher

Glacier bay

Glacier bay FW6AC027CP Montageanleitung

Glacier bay

Glacier bay HD67113W-8024H Montageanleitung

Glacier bay

Glacier bay 67099-0B01 Montageanleitung

Glacier bay

Glacier bay VDR2522A1 Bedienungsanleitung

Glacier bay

Glacier bay MCKENNA HD67726W-120602 Montageanleitung

Glacier bay

Glacier bay 873X-0804 Montageanleitung

Glacier bay

Glacier bay HD67615W-6001 Montageanleitung

Glacier bay

Glacier bay HD67295W-6001 Montageanleitung

Glacier bay

Glacier bay HD67738W-6001 Montageanleitung

Glacier bay

Glacier bay EAGLETON HD67540-1010H Montageanleitung

Glacier bay

Glacier bay MELINA HD67568-1201 Montageanleitung

Glacier bay

Glacier bay HD67103W-0601 Montageanleitung

Glacier bay

Glacier bay HD67553-014405 Montageanleitung

Glacier bay

Glacier bay HD67501-5101 Montageanleitung

Glacier bay

Glacier bay HD67099-0B01 Montageanleitung

Glacier bay

Glacier bay VDR3322A0 Bedienungsanleitung

Glacier bay

Glacier bay VDR2522B1 Bedienungsanleitung

Glacier bay

Glacier bay MODERN HD67818W-6110H Montageanleitung

Glacier bay

Glacier bay 65828-1001 Montageanleitung

Glacier bay

Glacier bay UPSON HD67553-010602 Montageanleitung

Glacier bay

Glacier bay 67534-0001 Montageanleitung

Glacier bay

Glacier bay VT3322G2 Bedienungsanleitung

Glacier bay

Glacier bay HD67030W-7001 Montageanleitung

Glacier bay

Glacier bay HD67896W-1101 Bedienungsanleitung

Beliebte Küchen- und Badezimmerausstattung Handbücher anderer Marken

Grohe

Grohe BRIDGEFORD 33 870 Bedienungsanleitung

Hans Grohe

Hans Grohe Zenio Metro 31811000 Bedienungsanleitung

Gröne

Gröne Zedra 32 555 Bedienungsanleitung

Transform

Transform QL045 Bedienungsanleitung

Sanela

Sanela SLU 09PTB Bedienungsanleitung

Lefroy Brooks

Lefroy Brooks C1-1400 Montageanleitung

Grohe

Grohe Rapido E Bedienungsanleitung

Danze

Danze D302455 Bedienungsanleitung

Waterworks

Waterworks CEKM30 Merkblatt

Helvex

Helvex Omega TV-298 Bedienungsanleitung

Tribata.

Tribata. GEORGIAN G5393 Bedienungsanleitung

Alpha Bidet

Alpha Bidet Alpha One Bedienungsanleitung

InSinkErator

InSinkErator H/HC3300 Installationshandbuch

Clou

Clou Xo type 1 Bedienungsanleitung

Kohler

Kohler Contra 26448T-4 Bedienungsanleitung

Grohe

Grohe Bridgeford 20 158 Bedienungsanleitung

Hans Grohe

Hans Grohe Croma Select S 180 Showerpipe EcoSmart... Bedienungsanleitung

Wickes

Wickes MONO SINK MIXER Bedienungsanleitung