Glacier bay 873X-0804 Montageanleitung

THANK YOU

INSTALLATION AND CARE GUIDE

SINGLE-HANDLE TUB AND SHOWER FAUCET

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this tub and

shower faucet. We strive to continually create quality products designed to enhance your home. Visit us online

to see our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM/GLACIERBAY

THD 11/2019 REV.02

Model#

873X-0804

873X-0827D

HD873X-0801

HD873X-0802

873X-0904

HD873X-0901

HD873X-0927D

SKU#

1001818631

1001819058

301879838

301879834

1001819034

301879836

301879832

Table of Contents

Important Information..............................2

Warranty ...................................................2

Pre-Installation.........................................3

Planning Installation ..............................3

Package Contents..................................6

Installation................................................7

Care and Cleaning ....................................14

Troubleshooting........................................15

Service Parts

...........................................

Important Information

□ Do not install this product until you read and understand the instructions in this manual. If you are installing this

product for someone else, leave this manual for the owner’s/ user’s reference.

□ Inlet ports are designed to allow for 1/2 in. COPPER tubing solder connection or 1/2 in. IPS threading coupling

connection. For threaded connections, wrap sealant tape around threaded ends before connecting. If soldering

connections, certain inammable parts should be removed prior to the soldering in order to avoid heat damage.

If you are unsure how to properly remove these parts, please call us at 1-855-HD-Glacier.

□ Protect your eyes with safety glasses when cutting or soldering water supply lines.

□ NOISE AND WATER HAMMER IN PEX SYSTEMS: Due to the inherent exibility of PEX compared with metallic

plumbing materials, water hammer and noise can sometimes occur from the pressure surges. It is important to

ensure the tubing is not in contact with wallboard, forced air ducts or other high-resonance materials. Clamping

or strapping can help prevent these noises. DO NOT USE PEX tubing from the valve to the tub spout.

Tools and Hardware Required ...............3

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.

Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer

purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial and business usage, whose purchasers are hereby extended

a ve year limited warranty from the date of purchase, with all other terms of this warranty applying except the

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for

more details.

Contact the Customer Service Team at 1-855-434-5224 or visit www.HomeDepot.com.

3HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents list. If any part is missing or damaged, do not attempt to install the product. Contact Customer Service

for replacement parts.

TOOLS AND HARDWARE REQUIRED

ADVANCED INSTALLATION: Consult a plumber or

professional before installing this product.

If you are replacing your plumbing valve, please review the four common plumbing methods illustrated below:

COPPER, IPS, PEX and CPVC. Remove the existing handle and valve trim before replacing your valve. Please follow

all local building and plumbing codes.

A. COPPER (Before soldering, remove the cartridge & stop valves from the valve)

Torch Lead-free solder Kit

Key

hole saw

Wire

brush

All installations can vary depending on how your previous faucet was installed. Not all supplies for faucet

installation are included; however, they are available wherever plumbing supplies are sold. When choosing your

installation supplies, make sure they are UPC and/or CSA approved products.

Flashlight

Pre-Installation (continued)

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

B. IPS

Key

hole saw

Flashlight

C. PEX+COPPER

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

Key

hole saw

Flashlight

Full circle

crimping tool

Pipe

wrench

COPPER COPPER

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Pre-Installation (continued)

D. CPVC+COPPER

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

Key

hole saw Flashlight

CPVC

cleaner

CPVC

cement

COPPER COPPER

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

B Shower arm 1

C Shower head 1

D Valve body 1

E Escutcheon 1

F Handle 1

G Set screw 1

H 2.5mm hex wrench 1

Shower ange

I Plug 1

J Tub spout 1

K Screw 2

L Plaster guard 1

M Escutcheon screw 2

N Index 1

O 3.97mm hex wrench 1

Installation

1 Preparing for installation

CAUTION: Always shut off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

30 in.

Tub & Shower

8 in. Min.

48 in.

Shower Only

1 1/4 in. Diamter

1 1/4 in. Diameter

48 in.

Tub & Shower

Refer to

the step 2

30 in.

Shower Only

2Installing the valve body and

removing the plaster guard

□Shut off the water supply to the tub and

shower.

□Verify that the hole sizes and positions of the

holes in the wall are correct:

□The shower and tub spout outlet holes

should be 1-1/4 in. diameter.

□Refer to Step 2 for valve access hole

dimensions.

□The recommended valve depth to the

nished wall is 2 in. min. to 3 in. max.

□Ensure that the valve body (D) cover is ush

with the nished exterior surface of the wall.

Position the valve body (D) correctly in the

wall with the side marked "UP" pointing up. The

8 in. minimum from the valve body (D) to the tub

spout (J) is required for proper operation.

The plaster guard (L) is positioned so that it is

ush with the nished wall. This ensures that

the valve will be at the correct position to accept

the trim. The depth for the valve body (D) in wall

is measured from the center of the shower

outlet to the nished wall surface. The accepted

depth distance is 2 in. to 3 in..

□

Unscrew the screws (K), and remove the plaster

guard (L).

□

NOTE: Be sure to position the valve body (D) correctly in

the wall, with the side marked "UP" facing upward.

2 in. to 3 in.

Finished wall

6 in. dia.

Installation (continued)

3a Installing the supply

connections

□

□Tighten the pipes to the valve body (D) with a

pipe wrench (not included).

Wrap thread sealant tape (not included) around

the pipe threads in a clockwise direction, as

shown.

□

Connect the hot and cold water supply lines (1,

not included), the shower outlet pipe (2, not

included), and tub outlet pipe (3, not included)

by threading them into the valve body (D) in a

clockwise direction.

Connect the pipe elbows (4, not included) to

the end of the shower outlet and tub outlet

pipes.

□

NOTE: The hot water supply lines go into the "H" inlet, and

the cold water supply lines go into the "C" inlet. Do not use

PEX or CPVC between the valve body (D) and tub spout (J).

NOTE: If you do not wish to install the tub outlet, insert

the plug (I) into the bottom of the valve body (D).

3b Installing the supply

connections (for soldering)

□

Before soldering, remove the screw (11),

inverter (12), sleeve (1), o-ring (2), bonnet nut (3),

cartridge (4), o-ring (5) and stop valves (6) from

the valve body (D).

□

Solder the hot and cold water supply lines (7,

not included), the shower outlet pipe (8, not

included), and tub outlet pipe (9, not included)

into the valve body (D) with the torch.

Solder the pipe elbows (10, not included) to the

end of the shower outlet and tub outlet pipes

with the torch.

□

Reinstall the screw, inverter (12, with the arrow

side facing down), sleeve, o-rings, bonnet nut,

cartridge and stop valves onto the valve body (D).

Make sure the cartridge (4) is installed correctly.

□

NOTE: The hot water supply lines go into the "H" inlet, and

the cold water supply lines go into the "C" inlet. Do not use

PEX or CPVC between the valve body (D) and tub spout (J).

NOTE: If you do not wish to install the tub outlet, insert

the plug (I) into the bottom of the valve body (D).

11 12

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

4Back to back installation

NOTE: Never install the valve body (D) upside down!

□If the hot and cold inlets are reversed (hot on

right and cold on left), remove the screw (1),

inverter (2), sleeve (3), and bonnet (4) from the

valve body (D) with reversed supply connections.

Rotate the cartridge (5) 180°, so H appears on

the right. Install the cartridge making sure that

the key is fully engaged with the slot in the

valve body (D). Slide the bonnet (4) over the

cartridge (5) and thread them onto the valve

body (D). Hand tighten securely. Reassemble the

sleeve (3), inverter (2, with the arrow side facing

down) and screw (1). If you are not making a

reverse or back to back installation, skip this

step and continue with the step 5.

Installation (continued)

6 Installing the plaster guard

Place the plaster guard (L) onto the valve body (D)

and secure with the screws (K).

□

5Flushing the water outlets

□

and checking for leaks

Place the handle (F) on the valve body (D)

inverter and turn the handle (F) to the full on

mixed position. Turn on the hot and cold water

supply lines and allow the water to ow from

the outlets for one minute, or until all foreign

matter has been ushed out. Check for leaks.

Shut off the water at the faucet and supply

lines. Check for leaks. Remove the handle (F).

□

Make sure the stop valves (1) are fully open.

If the stop valves (1) are closed, you must fully

open the stop valves (1) with the athead

screwdriver.

□

NOTE: Be sure to position the plaster guard (L) correctly

onto the valve body (D), with the side marked "SHOWER"

facing upward.

Normal

installation

(changes

not required)

Reverse

installation

Cold

Hot

NOTE: Check for leaks：

a. Turn off the integral stops, check if there are any leaks

on both of the inlet water supply connections.

b. Fully turn on the integral stops and use plug/cap to block

the outlets of shower head and spout, then turn on the

water and check if there are any leaks on the outlet

pipe/tube connections or elbows.

123

Normal installation

Reverse installation

Hot

Cold

Installation (continued)

7 Installing the shower arm

□Insert the long end of the shower arm (B) through

the shower ange (A), and wrap thread sealant

tape (not included) around the long end of the

shower arm (B) in a clockwise direction, as

shown.

Install the long end of the shower arm (B)

into the pipe elbow inside the wall. Carefully

tighten the shower arm (B) with a clean strap

wrench. Do not over tighten.

□

Wrap thread sealant tape around the pipe

threads of the tub spout outlet (1, not included)

in a clockwise direction, as shown.

□

Connect the tub spout outlet pipe (the tub

spout outlet pipe should project 1 in. to

2-15/16 in. from the nished wall) to the lower

pipe elbow (2, not included). Tighten the elbow

and tub spout outlet pipe connections with a

strap wrench.

□

8 Installing the tub spout

Place the spout (J) onto quick connection until

the spout (J) becomes ush with the nished

wall and tighten the screw (1) with with the

Hex wrench (Hex: 3.97mm, O) provided.

□

1 in. to 2-15/16 in.

Wall

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Glacier bay Küchen- und Badezimmerausstattung Handbücher

Glacier bay

Glacier bay DYLAN HD67551-1501 Montageanleitung

Glacier bay

Glacier bay 67257W-0108D2 Montageanleitung

Glacier bay

Glacier bay HD67553-014405 Montageanleitung

Glacier bay

Glacier bay HD65601-5101 Montageanleitung

Glacier bay

Glacier bay VDR2522B1 Bedienungsanleitung

Glacier bay

Glacier bay HD67495-1008D2 Montageanleitung

Glacier bay

Glacier bay HD67103W-0601 Montageanleitung

Glacier bay

Glacier bay HD67763W-5091 Montageanleitung

Glacier bay

Glacier bay 67574W-6001 Montageanleitung

Glacier bay

Glacier bay FW6AC012CP Montageanleitung

Glacier bay

Glacier bay HD873X-3601 Montageanleitung

Glacier bay

Glacier bay FP4A0052BNV Montageanleitung

Glacier bay

Glacier bay FP4AF263CP Montageanleitung

Glacier bay

Glacier bay HD67738W-6001 Montageanleitung

Glacier bay

Glacier bay HD67573W-6001 Montageanleitung

Glacier bay

Glacier bay 67536-0508D2 Montageanleitung

Glacier bay

Glacier bay HD67896W-1101 Bedienungsanleitung

Glacier bay

Glacier bay HD67552-0401 Montageanleitung

Glacier bay

Glacier bay VU3219A0 Bedienungsanleitung

Glacier bay

Glacier bay HD873X-5D35 Montageanleitung

Glacier bay

Glacier bay 4165F Bedienungsanleitung

Glacier bay

Glacier bay HD67113W-8024H Montageanleitung

Glacier bay

Glacier bay HD67551-0301 Montageanleitung

Glacier bay

Glacier bay 4127F Bedienungsanleitung

Beliebte Küchen- und Badezimmerausstattung Handbücher anderer Marken

Grohe

Grohe BRIDGEFORD 33 870 Bedienungsanleitung

Hans Grohe

Hans Grohe Zenio Metro 31811000 Bedienungsanleitung

Gröne

Gröne Zedra 32 555 Bedienungsanleitung

Transform

Transform QL045 Bedienungsanleitung

Sanela

Sanela SLU 09PTB Bedienungsanleitung

Lefroy Brooks

Lefroy Brooks C1-1400 Montageanleitung

Grohe

Grohe Rapido E Bedienungsanleitung

Danze

Danze D302455 Bedienungsanleitung

Waterworks

Waterworks CEKM30 Merkblatt

Helvex

Helvex Omega TV-298 Bedienungsanleitung

Tribata.

Tribata. GEORGIAN G5393 Bedienungsanleitung

Alpha Bidet

Alpha Bidet Alpha One Bedienungsanleitung

InSinkErator

InSinkErator H/HC3300 Installationshandbuch

Clou

Clou Xo type 1 Bedienungsanleitung

Kohler

Kohler Contra 26448T-4 Bedienungsanleitung

Grohe

Grohe Bridgeford 20 158 Bedienungsanleitung

Hans Grohe

Hans Grohe Croma Select S 180 Showerpipe EcoSmart... Bedienungsanleitung

Wickes

Wickes MONO SINK MIXER Bedienungsanleitung