Glacier bay 4332F Bedienungsanleitung

Questions, problems, missing parts? Before returning to the store,

call Glacier Bay Customer Service

8 a.m. - 7 p.m. Monday - Friday EST and Saturday 9 a.m. - 6 p.m.

4332F

1005126669

We appreciate the trust and conﬁdence you have placed in Glacier Bay through the purchase of this sink. We strive to

continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Glacier Bay!

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty.

Glacier Bay products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace

FREE OF CHARGE any product or parts that proves defective. Simply return the product / part to any The Home Depot retail locations or call

1-855-HD-GLACIER to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer purchaser must

be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and tear. This warranty

excludes all industrial, commercial, and business usage, whose purchasers are hereby extended a ﬁve year limited warranty from the date

of purchase, with all other terms of this warranty applying except the duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not

apply to you. This warranty gives you speciﬁc legal rights. You may also have other rights that vary from state to state and province to

province. Please see a store or contact 1-855-HD-GLACIER for more details.

Please carefully read this guide before installing or using this

product. Store this guide in a safe place for future reference.

Before installation, verify the cabinet clearance:

PLANNING INSTALLATION

TOOLS REQUIRED

HARDWARE INCLUDED

Compare all parts with the Hardware Included and Package Contents lists in this manual. Check the surface of the sink for any ﬂaws or

damage, including dents, bends, bumps, or scuff marks. If any damage is noticed or parts are missing, do not proceed with the

installation.Contact the Customer Service Team at 1-855-HD-GLACIER or visit www.HomeDepot.com/glacierbay.

NOTE: This sink is a topmount (from above the counter)

installation.

NOTE: Under mount clips not included. If you are installing this sink as an under mount, please contact

NOTE: Hardware not shown to actual size.

a professional installer or contact us at 1-855-HD-GLACIER to determine the type of clip needed.

Faucet

Strainer

Cutting board

Sink basket

Rolling grid

Grid

Strainer cover

PACKAGE CONTENTS

Sink Cap for Soap Dispenser Hole

1 2

Preparing the countertop Cutting the installation hole

Center the template (B) on the counter so that it is parallel to

the counter edge and that the installation hole will not

interfere with the structure of the cabinet.

Tape the template (B) to the countertop to keep it in place

and trace the cutout line on the template (B) With a pencil.

Drill a pilot hole and cut the countertop opening. Use the

appropriate cutting tool for the surface you are cutting.

You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)

according to your taste and needs.

Top mount Installation

Installing the faucet assembly

Preparing the sink

Place the sink (A) into the installation hole to verify the ﬁt. Adjust the cutout if necessary.

Install the strainer assembly as these steps describe. It is easier to install the strainer assembly to the sink before the sink is installed to

the cabinet.

Apply a small amount of plumbers putty (not included) in the notch around the drain hole of the sink (A) .

Place the strainer ring (3) on top of the drain hole in the sink (A).

Insert the screener (1) into the bowl (2) and place this assembly into the drain hole in the sink (A).

From underneath the sink (A), place the rubber washer (4), paper washer (5), locknut (6), plastic joint (7), and connecting nut (8) over

the drain hole in the sink (A).

Tighten the locknut (6) and connecting nut (8) to hold the strainer assembly securely in place.

Shut off the water supply.

Insert the faucet assembly (D) through the hole in the sink.

CAUTION: Always shut off the water supply before removing an existing faucet or

replacing any part of a faucet. Open the faucet handle to relieve water pressure and

ensure that the water is completely shut off.

Top Mount Installation (Continued)

Securing the faucet assembly

Installing the sink

rotate the clips

Sink

Push

1 1

Push

up 21

Sink

Continue to push up

and turn clockwise

to tighten

From underneath the sink, secure the faucet assembly to the

sink with the FastmountTM system (21). Push the FastmountTM

system (21) up over the threads until it stops against the

bottom of the sink, then hand turn (clockwise) to tighten.

Apply silicone sealant (not included) around the underside and lip of the sink (A).

Carefully lower the sink (A) into the counter.

Rotate the clips. Tighten the screws on the top mount clips (AA) evenly until the

sink (A) is ﬂush with the counter. Do not overtighten.

Wipe excess sealant with a rag.

Optional sink cap (J) will be available to ﬁll the hole if the soap

dispenser or other equipment is not installed.

Top Mount Installation (Continued)

Attaching the quick connector

to the receiving block

7 8

Weight

here

Weight

here

Installing the weight

Install the weight clip (20) at the point of the hose marking "weight

here”.

Insert the weight (19) onto the clip (20) by sliding it down onto the

clip (20).

Push the quick connector (18) ﬁrmly upward and attach it to

the receiving block (9). Pull down moderately to ensure the

connection has been made.

Making the water supply

connections

Thread the nut (1) on the supply line onto the outlet of

the water supply valve (2) and tighten with a wrench. Do

not overtighten.

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

other and damaging.

Top Mount Installation (Continued)

Flushing and checking for leaks 11

Removing the quick connector

If it is necessary to remove the quick connector (1), squeeze

the tabs (2) on the quick connector and then pull down to

disconnect.

Squeeze

Pull

down

12 Installing the accessories

Pull the hose assembly out of the spout and remove

the spray head by unscrewing it from the hose in a

counterclockwise direction. Be sure to hold the end of

the hose down into the sink and turn the faucet to the

warm position where it mixes hot and cold water.

Flush the water lines for one minute. This ﬂushes

away any debris that could cause damage to internal

Re-tighten any connections if necessary, but do not

overtighten. Reinstall the spray head by hand tightening

it back onto the spray hose in a clockwise direction.

When ﬁnished, place the sink grid (H), cutting board (E),

basket (F), rolling grid (G) and strainer cover (I) into the sink.

IMPORTANT: After installation is completed, turn on

the hot and cold water supplies. Check for leaks.

Top Mount Installation (Continued)

Preparing the countertop Cutting the installation hole

Check the template (A) and select the cutline you want: line A1

is bowl size; line A2 is 1/2 wider than bowl size. If you choose

line A1 or A2, tear off the template through the broken line.

Place the template (A1 or A2) on the countertop. Ensure the

template is centered on the counter so that it is parallel to the

counter edge and that the installation hole will not interfere

with the structure of the cabinet. Tape the template (A1 or A2)

to the countertop to keep it in place and then trace the cutout

line on the template (A1 or A2) with a pencil.

Drill a pilot hole and cut the countertop opening. Use the

appropriate cutting tool for the surface you are cutting.

WARNING: When you choose undermount style installation, do not pull out the installation rail shown

here. Pulling this rail out will permanently damage the sink. It is strongly recommended that you have a

professional installer install this sink for the undermount style.

NOTE: Under mount clips not included. If you are installing this sink as an

under mount, please contact a professional installer or contact us at

1-855-HD-GLACIER to determine the type of clip needed.

Undermount Installation

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Glacier bay Sanitärprodukte Handbücher

Glacier bay

Glacier bay HD67732W-609006 Montageanleitung

Glacier bay

Glacier bay HD67099-0B01 Montageanleitung

Glacier bay

Glacier bay FP4AF263CP Montageanleitung

Glacier bay

Glacier bay HD67552-1A01 Montageanleitung

Glacier bay

Glacier bay AVERA GBFA002 Bedienungsanleitung

Glacier bay

Glacier bay 67731W-6001 Montageanleitung

Glacier bay

Glacier bay 67529W-6A27H2 Montageanleitung

Glacier bay

Glacier bay HD67190W-6104 Montageanleitung

Glacier bay

Glacier bay Belle Foret 67416-3C01 Montageanleitung

Glacier bay

Glacier bay HD67559-0001 Montageanleitung

Glacier bay

Glacier bay DORIND HD67108W-6035 Montageanleitung

Glacier bay

Glacier bay MELINA HD67513W-6C01 Montageanleitung

Glacier bay

Glacier bay HD67673-0001 Montageanleitung

Glacier bay

Glacier bay HD67364W-6B01 Montageanleitung

Glacier bay

Glacier bay FS6AC071CP Montageanleitung

Glacier bay

Glacier bay HD67780-1208D2 Montageanleitung

Glacier bay

Glacier bay 67070-0101 Bedienungsanleitung

Glacier bay

Glacier bay OSWELL HD67894W-1008D2 Montageanleitung

Glacier bay

Glacier bay 7032EC-A8104 Montageanleitung

Glacier bay

Glacier bay HD67112W-8004 Montageanleitung

Glacier bay

Glacier bay HD67849-0001 Montageanleitung

Glacier bay

Glacier bay FAIRWAY HD67529W-6327H2 Montageanleitung

Glacier bay

Glacier bay 67552-2101 Montageanleitung

Glacier bay

Glacier bay 67579W-6301 Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema