Glacier bay 873W-3201 Bedienungsanleitung

THANK YOU

USE AND CARE GUIDE

SINGLE-HANDLE TUB AND SHOWER FAUCET

Questions, problems, missing parts? Before returning to the store,

call Glacier Bay Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

1-855-HD-GLACIER

HOMEDEPOT.COM

Model #873W-3201

873W-3204

873W-3227H2

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this tub and

shower faucet. We strive to continually create quality products designed to enhance your home. Visit us online

to see our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

YOW REV.01

Table of Contents

Safety Information....................................2

Warranty ...................................................2

Pre-Installation.........................................3

Planning Installation ..............................3

Tools Required .......................................3

Hardware Included.................................3

Package Contents ..................................4

Installation................................................5

Adjusting the temperature .......................10

Care and Cleaning ....................................12

Service Parts.............................................13

Safety Information

Please read and understand this entire manual before

attempting to assemble, operate, or install the product.

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.

Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer

purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for

more details.

3 HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents and Hardware Included list. If any part is missing or damaged, do not attempt to install the product.

TOOLS REQUIRED

Safety

goggles

Phillips

screwdriver

Thread

sealant tape

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity

AA Escutcheon screw 2

Pipe

wrench

Strap

wrench

Adjustable

wrench

Flat blade

screwdriver

Measuring

tape

Thermometer

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

B Washer 1

C Shower arm 1

D Shower ange 1

E Handle 1

FSet screw 1

Shower head

G Accessorize cap 1

H Escutcheon 1

I Valve body 1

J Plug 1

K Tub spout 1

L Screw 2

M Plaster guard 1

Part Description Quantity

5 HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation

1 Preparing for installation

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

□Shut off the water supply to the tub and

shower.

□Verify that the hole sizes and positions of the

holes in the wall are correct：

□The shower and tub spout outlet holes

should be 1-1/4 in. diameter.

□The valve access hole should be 6 in.

diameter.

□The recommended valve depth to the

nished wall is 2 in. min. to 2-1/2 in. max.

□Ensure that the valve body (I) cover is ush

with the nished exterior surface of the wall.

Position the valve body (I) correctly in the

wall with the “UP” pointing up. The 8 in.

minimum from the valve body to the tub

spout is required for proper operation.

2 Removing the plaster guard

30 in.

Tub & Shower

8 in. Min.

48 in.

Shower Only

1 1/4 in. Diamter

1 1/4 in.Diameter

48 in.

Tub & Shower

6 in.

Diameter

30 in.

Shower Only

Unscrew the screws (L), and remove the

plaster guard (M).

□

Installation (continued)

3 Installing the supply

connections

□

□Tighten the pipes to the valve body (I) with a

pipe wrench (not included).

Wrap thread sealant tape around the pipe

threads in a clockwise direction, as shown.

□

Connect the hot and cold water supply lines (1,

not included), the shower outlet pipe (2, not

included), and tub outlet pipe (3, not included)

by threading them into the valve body (I) in a

clockwise direction.

Connect the pipe elbows (4, not included) to

the end of the shower outlet and tub outlet

pipes.

□

NOTE: Be sure to position the body (I) correctly in the

wall, with the markings "UP" facing upward. The hot water

supply lines go into the H inlet, and the cold water supply

lines go into the C inlet. Do not use PEX or CPVC between

the valve and spout.

NOTE: If you do not wish to install the tub outlet, insert

the plug (J) into the bottom of the valve body (I).

4Flushing the water outlets

□

and checking for leaks

Place the handle (E) on the valve body (I)

inverter and turn the handle (E) to the full on

mixed position. Turn on the hot and cold water

supply lines and allow the water to ow from

the outlets for one minute, or until all foreign

matter has been ushed out. Check for leaks.

Shut off the water at the faucet and supply

lines. Remove the handle (E).

□

HOT COLD

7 HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

5 Installing the plaster guard

Place the plaster guard (M) onto the body (I)

and secure with the screws (L).

□

6 Installing the shower arm

□Insert the long end of the shower arm (C) through

the ange (D), and wrap thread sealant tape

around the long end of the shower arm (C) in a

clockwise direction, as shown.

Install the long end of the shower arm (C) into the

pipe elbow inside the wall. Carefully tighten the

shower arm (C) with a clean strap wrench. Do not

over tighten.

□

Wrap thread sealant tape around the pipe threads

of the tub spout outlet (1, not included) in a

clockwise direction, as shown.

□

Connect the tub spout outlet pipe (the tub spout

outlet pipe should project 1-11/16 in. to 3-1/2 in.

from the nished wall) to the lower pipe elbow

(2, not included). Tighten the elbow and tub spout

outlet pipe connections with a strap wrench.

□

1-11/16 in. to 3-1/2 in.

Wall

Installation (continued)

7 8Installing the tub spout

Place the spout (K) onto quick connection until

the spout (K) becomes ush with the nished

wall and tighten the screw (1) with with the

Hex wrench (Hex: 3.97mm) provided.

□

Removing the plastic cap

□Before installing the escutcheon (H), remove the

plastic cap from the valve body (I) by twisting

the cap in a clockwise direction.

9 HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

9Checking for leaks

□

Place the handle (E) on the valve body (I)

inverter and turn the handle to the full on mixed

position.

When the valve is turned on, water normally

ows through the tub spout (K). To activate the

shower, turn the valve on and pull the knob (1)

up. Hold the knob (1) until the water ows

continiously from the shower arm (C). Check for

leaks.

Shut off the water at the faucet and supply lines.

Remove the handle (E).

□

Installing the escutcheon

and handle

□Install the escutcheon (H) onto the valve body

(I) using the escutcheon screws (AA). Place the

accessorize cap (G) onto the escutcheon (H).

Place the handle (E) onto the valve body (I) and

tighten the set screw (F) with the Hex wrench

(Hex: 2.5 mm) provided.

□

FOR

SHOWER

Installation (continued)

11Installing the shower head

□Make sure the washer (B) is inside the shower

arm (C). Attach the shower head (A) to the shower

arm (C). Carefully tighten the shower head (A) with

a clean strap wrench.

Adjusting the temperature

1 Removing the handle,

escutcheon, and inverter

□Unscrew the set screw (F) from the handle (E), and

then remove the handle (E) from the valve body (I).

Remove the accessorize cap (G) from the escutcheon (H).

□Unscrew the escutcheon screws (AA), and

remove the escutcheon (H) from the valve

body (I).

□Unscrew the sleeve (1) from the valve body (I).

□Unscrew the screw (2) from the inverter (3),

and then remove the inverter (3) from the

valve body (I).

2 Remove the red limit stop ring

□Remove the red limit stop ring (1) from the

cartridge assembly (2).

123

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Glacier bay Sanitärprodukte Handbücher

Glacier bay

Glacier bay VT3322TA0ACC Bedienungsanleitung

Glacier bay

Glacier bay Belle Foret 67416-3C01 Montageanleitung

Glacier bay

Glacier bay 67094W-6001 Montageanleitung

Glacier bay

Glacier bay 7032EC-A8104 Montageanleitung

Glacier bay

Glacier bay MODISH HD67071W-6001 Montageanleitung

Glacier bay

Glacier bay HD67751W-6101 002846191 Montageanleitung

Glacier bay

Glacier bay HD67416-3E01 Montageanleitung

Glacier bay

Glacier bay 67731W-6001 Montageanleitung

Glacier bay

Glacier bay HD67751W-6101 002846191 Montageanleitung

Glacier bay

Glacier bay HD873X-6210H Montageanleitung

Glacier bay

Glacier bay 67704W-6001 Montageanleitung

Glacier bay

Glacier bay MELINA HD67513W-6C01 Montageanleitung

Glacier bay

Glacier bay HD67644-0101 Montageanleitung

Glacier bay

Glacier bay HD67543W-6001 Montageanleitung

Glacier bay

Glacier bay HDQF51A1153BNV Montageanleitung

Glacier bay

Glacier bay DORSET HD67693W-6401 Montageanleitung

Glacier bay

Glacier bay 67257-0001 Bedienungsanleitung

Glacier bay

Glacier bay 873X-6101 Montageanleitung

Glacier bay

Glacier bay HD833CX-0027D Montageanleitung

Glacier bay

Glacier bay Mandouri HD67458-1308D2 Montageanleitung

Glacier bay

Glacier bay F8FA0000BNV Montageanleitung

Glacier bay

Glacier bay 67112W-8004 Montageanleitung

Glacier bay

Glacier bay 67575W-6001 Montageanleitung

Glacier bay

Glacier bay HDQFW6AC027CP Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema