Global Sat MobileDefender 4 Bedienungsanleitung
Mobile Defender™ Model 4 (MD4)
User Guide
GlobalSat WorldCom Corporation
16F., No. 186, Jian 1st Rd, Zhonghe Dist.,
New Taipei City 23553, Taiwan
Tel: 886.2.8226.3799/ Fax: 886.2.8226.3899
www.globalsat.com.tw
USGlobalSat Incorporated
14740 Yorba Court Chino, CA 91710
Tel: 888.323.8720 / Fax: 909.597.8532
www.usglobalsat.com
© 2019 Globalsat WorldCom Corporation/USGlobalsat, Inc. All rights reserved. The Globalsat logo is a trademark of
Globalsat Corporation. Windows is a register trademark of Microsoft Corporation. Acrobat is a registered
trademark of Adobe Systems Incorporated. Mac is a registered trademark of the Apple Corporation. All other
trademarks or registered trademarks are acknowledged as the exclusive property of their respective owners.
All rights reserved. No part of this manual may be reproduced, transmitted, copied, or stored in any storage medium,
for any purpose, without prior written consent from Globalsat WorldCom Corporation or USGlobalsat, Inc.
Globalsat/USGlobalsat hereby grants the right to download one (1) copy of this manual onto a hard drive for
personal use. This manual is copyrighted and may contain proprietary information that is subject to change without
notice.
TABLE OF CONTENTS
1. Introduction and Features...................................................................................................................4
1.1 Buttons & LED Indicators...................................................................................................4
1. Introduction and Features (Continued)..............................................................................................5
1.2 LED Indicators.....................................................................................................................6
2. Device Operation..................................................................................................................................7
2.1 Device charging ...................................................................................................................7
2.2 Power ...................................................................................................................................8
2.3 Disabling the Power Button & Low Power Alerts...............................................................9
2.4 Emergency (SOS) Button ..................................................................................................10
2.4.1 Answering Calls..............................................................................................................12
2.4.2 Ending Calls & Disabling the Hang-up Feature.............................................................12
1. Introduction and Features
1.1 Buttons & LED Indicators
MD4 is a personal tracking device with fast acquisition time. It is compact, portable and
stylish in design with GPS / 4G LTE wireless network. User can easily remotely configure
MD4, and then displays the location on Web Service.
1. Introduction and Features (Continued)
1
SIM Card Tray
2
High-powered Speaker
3
SOS Button
4
Cellular LED
5
GPS LED
6
Wireless LED
7
Power LED
8
Power Button
9
Lanyard Holes
10
Charging Pins
1. Introduction and Features (Continued)
1.2 LED Indicators
Cellular LED
LED
Shows Green
Flash Green Quickly
Flash Green Slowly
State
1. MD4 is searching
network.
2. MD4 is in voice
call.
1. MD4 is sending
data
2. MD4 is
registered to 4G
network
MD4 is registered to
3G/2G network
GPS LED
LED
Flash White Quickly
Flash White Slowly
State
MD4 does not get GPS fix
MD4 gets GPS fix
Wireless LED (BT/Wi-Fi status)
LED
Flash Blue
Off
State
MD4 is searching BT or Wi-Fi
MD4 is not searching BT or Wi-Fi
Power Status LED
LED
Shows Red
Shows Orange
Only applies when
device is on the
charging cradle
Off
Only applies when
device is NOT on the
charging cradle
State
Battery power is low.
This occurs when the
battery capacity is at or
below 30%.
Solid- MD4 is being
charged in the cradle or
a car charger.
MD4 is either off or is
currently on and has a
charge between 30%
and 100%
2. Device Operation
2.1 Device charging
Before First Use: Ensure a fully charged MD4 upon receipt by docking it in the charging
cradle prior to use. It may take 3 hours to ensure a full charge. The power icon will light-up
in orange when charging and the power icon will flash when fully charged. After fully
charging the MD4, based on standard settings and usage it should last 2 full days before
requiring another charge.
Note: the MD4 will automatically turn on when placed in the charging cradle.
1
2
2. Device Operation (Continued)
2.2 Power
Turn On MD4 by pushing and holding the power button until the device vibrates.
Turn Off MD4 by pushing and holding the power button until the device vibrates.
When device loses battery power and powers down the MD4 will vibrate and make an
audible series of beeps as it turns off.
2. Device Operation (Continued)
2.3 Disabling the Power Button & Low Power Alerts
The MD4 is customizable and may be set to prevent using the power button. This is done
so that the device cannot be turned off accidentally or when it is desired to be in a
perpetual “powered on” state. This is not a default setting. Ask your service provider for
assistance with disabling the power button as needed.
Low Battery Notification: Alow battery notice is triggered when the MD4 reaches 30% of
its total battery capacity. This typically provides between 12 and 24 hours of notice prior to
a forced shutdown of the device. Alternatively, placing the MD4 on the charging cradle will
recharge the device in approximately 2 to 3 hours. When the MD4 reaches 10% of its total
battery capacity, it will first connect to the GPS network, obtain an updated location (or use
its last known location if the GPS network is not available) and then will connect to the
cellular network and send a power down notice by email, text message or both as setup.
Ask your service provider for assistance with setting up the power off events and
notifications as needed.
4. Device Operation (Continued)
2.4 Emergency (SOS) Button
In order to initiate an emergency or SOS notification, press and hold the SOS button
for 3 seconds or until you feel the MD4 vibrate (this is a default setting that can be
customized). At that point the MD4 will do the following:
1. Connect to the GPS network and retrieve an updated location (if the GPS
network is not available, it may use the last known location),
2. Connect to the cellular network to send the SOS notification via email, text
message or both, and
3. Begin to call the SOS contact numbers set for the MD4 (ask your service
provider for assistance as needed).
Setup Multiple SOS Numbers: Up to 4 SOS numbers can be set and called in
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Global Sat GPS Handbücher
Global Sat
Global Sat BTT-100 Bedienungsanleitung
Global Sat
Global Sat ER-506 Bedienungsanleitung
Global Sat
Global Sat GH-505 Bedienungsanleitung
Global Sat
Global Sat GS-Traq TR-206 Bedienungsanleitung
Global Sat
Global Sat BR-355S4 Bedienungsanleitung
Global Sat
Global Sat EM-318-02 Bedienungsanleitung
Global Sat
Global Sat TR-101 Bedienungsanleitung
Global Sat
Global Sat EM-408 Bedienungsanleitung
Global Sat
Global Sat TR-102 Bedienungsanleitung
Global Sat
Global Sat TR-102 Bedienungsanleitung
Global Sat
Global Sat BR-355 Bedienungsanleitung
Global Sat
Global Sat ET-212 Bedienungsanleitung
Global Sat
Global Sat TR-300V Bedienungsanleitung
Global Sat
Global Sat GH-561 GPS Trek Pro Bedienungsanleitung
Global Sat
Global Sat ET-332 Bedienungsanleitung
Global Sat
Global Sat USB GPS Dongle ND-100 Bedienungsanleitung
Global Sat
Global Sat SD-502 SDIO Bedienungsanleitung
Global Sat
Global Sat ET-312 Bedienungsanleitung
Global Sat
Global Sat GPS Director YE-GD101 Bedienungsanleitung
Global Sat
Global Sat TR-203A Bedienungsanleitung
