GMC BLU-GM3 Bedienungsanleitung

Courtesy of: DiscountCarStereo.com

Serving the internet community since 1995

Driving without distraction is a necessity for a safer driving experience.

BLU-GM3

QUICK START MUSIC STREAMING INSTALLATION GUIDE FOR SELECT 2000-12 GM CLASS-II RADIOS

Created May 5, 2016

Revised November 20, 2020

Introduction:

Many GM owners will be pleased to know that they can upgrade the audio system

to support Bluetooth music streaming without changing the radio. The BLU-GM3

connects to the 12-pin port on select 2000-12 radios and replaces factory

External CD Changer** or XM (if present). A Bluetooth wireless connection

means no wires, clutter or complicated setup. All the user has to do is connect

module to the radio, pair Smartphone or Tablet and enjoy GPS, Music Apps, audio

books and more on the car system without wires or complicated setup.

See Frequently Asked question at the end of this guide for details.

Installation:

1. Remove GM radio from dashboard to gain access to connectors.

(Vehicle specific radio removal instruction are not part of this guide,

but available upon request)

2. Once radio has is removed, disconnect 12-pin plug (f present) from

radio (See Fig.1 &2)

Fig. 1

12-pin Plug

Fig. 2

GM Class II Radio connectors

3. Connect adapter harness 12-pin plug (See Fig. 3) to radio 12-pin port

(See Fig. 2)

Fig. 3

installation harness

There may or may not be a 12-pin plug connected

to radio. Always connect male 12-pin plug from

adapter harness to radio. If radio did not have a 12-

pin plug, harness other end remains empty.

4. Connect/Tap installation harness yellow wire to a +12V Battery

(constant) supply and black wire to Ground.

5. Connect/Tap red wire to 12V ACC supply in fuse block or elsewhere

Red wire must be connected to 12V supply controlled

by ignition key. Verify correct voltage/operation

prior to proceeding to next step. Red wire must

never be connected to 12V battery source.

6. Connect installation harness 22-pin Molex plug (See Fig. 3) to module

22-pin connector (See Fig. 4)

Fig. 4

22-pin Molex connector

7. They are 3 possible dip-switch settings for GM radios. The most

common is by turning 3 and 8 “ON”or down (See Fig. 5); however if

radio does not enter aux mode, disconnect module and turn 1, 3, and 8

“ON”or down, reconnect and test. If radio still does not enter aux

mode, disconnect module, and turn 2, 3, and 8 “ON”or down

reconnect and test. Please note to always disconnect power from

module when making changes to dip-switch settings.

Fig. 5

dip-switches

8. Secure and proceed to next section.

Pairing:

Pairing varies among deices but basic steps are the same.

1. Turn Ignition and radio “ON”

2. On A2DP device: go to

Bluetooth Settings

3. Select

Bluetooth

and turn on.

4. Select Bluetooth settings

5. Tap

Scan for devices

6. Wait for Bluetooth device name to appear and select it.

LED inside module will glow steady (paired)

Test Operation:

1. Turn ignition to “ACC”or “ON”and turn on radio

2. Press “AUX” button on radio

3. Launch Smartphone or tablet streaming application.

4. Ensure smartphone volume level is set to 75% or higher

5. Use radio volume knob to set the playback level.

Playlist and Track selection is *NOT* possible from

radio. Use audio device built-in controls or optional

wireless remote control to access and control the

audio files.

6. If correct operation is confirmed go ahead and reinstall radio.

Optional Smart Remote:

Smart remote is optional and not required for the BLU-CM3 to work,

however instead of trying to juggle a phone while driving, simply press the

remote buttons which can be mounted to steering wheel.

Remote control functions:

1. Control music wirelessly

2. Activate VR commands (Not for Siri.)

3. Track up/down

4. Volume up/down

Pairing Bluetooth remote:

Remote Control Operation:

Use remote to perform the following functions on any iOS7.0 and higher or

Android 4.4 and higher.

Contents:

Frequent asked questions

1. Does the BLU-GM3 work in vehicles with a 6-CD changer radio

(changer built-into radio)

YES; but radio must also have a “TAPE AUX” or “CD AUX” button

2. I have both an external CD changer and XM; do I need to disconnect

anything for the BLU-GM3 to work?

YES; both XM and remote CD changer must be disconnected. Purchase the

A2DIY-GM3x to retain XM or remote CD changer.

3. If I decide to remove the BLU-GM3, will I have any troubles with the

wiring?

NO; the BLU-GM3 installation harness does not interfere with factory wiring

integrity and once disconnected, everything will work as it did prior.

4. Can I use the BLU-GM3 for Bluetooth hands free calling?

NO; the BLU-GM3 only supports Bluetooth streaming audio. Purchase our

A2DIY-GM3 or A2DIY-GM3x for hands-free and music streaming applications

5. Module LED is flashing and able to pair phone, but no matter how many

times I press the AUX button, radio does not enter AUX mode. Any

ideas?

Most Class-II radios require module pins 3 and 8 to be ‘ON” (down), or 1, 3

and 8 or 2, 3 and 8. To change settings first disconnect module from

harness (power), make necessary changes and reconnect module. Damage

to module may occur if dip-switch changes are made with power applied to

module.

Email support@discountcarstereo.com

subject to change without notice. Other products and companies referred to herein are

trademarks or registered trademarks of their respective companies or mark holders.

Inhaltsverzeichnis

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung