Godex RT700i Bedienungsanleitung

RT700i/RT730i BARCODE PRINTER

USER MANUAL

User Manual

Version

Issue Date

P/N

: RT700i series

: Rev. 1.6

: 2013.10.03

: 920-014811-00

5Accessories

5.2 Installing the Label Dispenser

047

The Overview of the Label Dispenser

**** A label liner thickness of 0.006 mm ± 10% and a weight of 65 g/m2± 6% are recommended.

**** The label dispenser will take labels up to a max. width of 118 mm.

****When using the label dispenser, set the stop position (printer command ^E) to 13.

Preparation Steps

Please see the Section 5.1 Preparation Steps to complete the preparation steps before installing the label dispenser.

Installing the Label Dispenser

1. Pass the connection cable through the slot of the printer.

PAPER SENSOR

PAPER FEED ROLLER

COVER

CONNECTION CABLE OF LABEL DISPENSER

SLOT

5Accessories

048

2. Place label dispenser to align both holes of screw and then tighten the screws.

3. Place the platen back to the printer and lock the clips.

4. Close the printer cover and printing mechanism.

Then to turn the printer upside down.

Open the cover

2Tighten the screw

Lock the clip

CLIP

Close the printer cover

Push

RELEASE CATCH

Release catch for closing

the printer cover

5Accessories

049

5. Open the cover on the bottom of printer.

6. Plug the connector fo the label dispenser to the jack.

7. Close the cover of the module connection jacks.

Open the cover

COVER OF THE MODULE CONNECTION JACKS

Plug

JACK

CONNECTOR OF THE CONNECTION CABLE

Close the cover

COVER OF THE MODULE CONNECTION JACKS

****The printer must be switched off when plugging the connector, or the motherboard may be destroyed!

****There are 2 jacks : the lower jack for the label dispenser, the upper jack for the cutter.

CUTTER JACK

LABEL DISPENSER JACK

5Accessories

050

2. Feed the Label stock through the label guides.

And pull the label liner through the platen and the steel of the label dispenser.

****Labels should be at least 25 mm high.

Loading Label Roll with the Label Dispenser Module

1. Remove the first label from the label stock.

Tear a label

THE FIRST LABEL

LABEL STOCK

LABEL LINER

Through the label guides

LABEL LINER

PLATEN

Through the platen

and the steel

STEEL

5Accessories

051

3. The feeding path of label and liner should be as shown in below graphic.

4. Close the label dispenser and printer cover. The installation is completed now.

LABEL STOCK PLATEN

ROLLER

LABEL

LABEL LINER

RT700i

Close the cover

5Accessories

052

5. Press the FEED button to feed the label. The label will be peeled from the liner while it passes through the label

dispenser.

RT700i

Press the feed key

LABEL LINER

LABEL

**** There is a paper sensor on the Label Dispenser module. It will stop the printing if it is covered by label. Remove

the last printed label and the printer will then continue to print next label.

RT700i

PAPER SENSOR

Andere Handbücher für RT700i

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Godex Barcode-Lesegerät Handbücher

Godex

Godex GS220 Bedienungsanleitung

Godex

Godex DT2 Bedienungsanleitung

Godex

Godex GS550 Bedienungsanleitung

Godex

Godex HD90 Bedienungsanleitung

Godex

Godex GS550 Bedienungsanleitung

Godex

Godex G500 Bedienungsanleitung

Godex

Godex EZ-1105 Bedienungsanleitung

Godex

Godex RT200 Bedienungsanleitung

Godex

Godex AP16-F Bedienungsanleitung

Godex

Godex RT700i Bedienungsanleitung

Godex

Godex EZ-2000 PLUS Bedienungsanleitung

Godex

Godex EZ100 Series Bedienungsanleitung

Godex

Godex RT700 SERIES Bedienungsanleitung

Godex

Godex RT800i Series Bedienungsanleitung

Godex

Godex GS500 Bedienungs- und Wartungsanleitung

Godex

Godex 5VDC Bedienungsanleitung

Godex

Godex GS520 Bedienungsanleitung

Godex

Godex DT2 Bedienungsanleitung

Godex

Godex GS200 Bedienungsanleitung

Godex

Godex EZPi1000 Series Bedienungsanleitung

Godex

Godex EZ-1000 Plus Bedienungsanleitung

Godex

Godex G525 Bedienungsanleitung

Godex

Godex EZ2050 Bedienungsanleitung

Godex

Godex G300 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung