Godex DT2L Bedienungsanleitung
DT2L/DT4L
THERMAL LABEL PRINTER
USER MANUAL
User Manual
Version
Issue Date
P/N
: DT4L
: Rev. 1.0
: 2018.04.20
: 920-015311-00
DT2L/DT4L USER MANUAL
CONTENTS
1
Barcode Printer
01
1.1
1.2
Box Content
Getting to Know Your Printer
01
02
2
Printer Setup
05
2.1
2.2
2.3
2.4
Loading the label roll
Loading the Label Roll Holder
Connecting the Printer to the Host Computer
Installing Printer Driver and GoLabel with Super
Wizard CD
05
08
10
11
3
Printer Setting and Control
16
3.1
3.2
3.3
3.4
Operation Panel
LED Status
Label Calibration and Self Test
Error Alerts
16
17
18
19
4 NetSetting for Ethernet 20
4.1
4.2
Installing the NetSetting Software
The Interface of NetSetting
20
21
5
Maintenance
28
5.1
5.2
5.3
5.4
5.5
Cleaning the Print Head
Cleaning the Platen
Cleaning The Cutter
Labels With Black Marks
Troubleshooting
28
29
30
31
32
Appendix
DT2L/DT4L USER MANUAL
FCC COMPLIANCE STATEMENT
FOR AMERICAN USERS
This equipment has been tested and found to comply with the limits for a CLASS A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at own expense.
EMS AND EMI COMPLIANCE STATEMENT
FOR EUROPEAN USERS
This equipment has been tested and passed with the requirements relating to electromagnetic compatibility
based on the standards EN55022:2010 Class A, EN61000-3-2:006/A2:2009, EN61000-3-3:2008 and EN55024:1998
/A1:2001/A2:2003, IEC 61000-4-2:2008 series, The equipment also tested and passed in accordance with the
European Standard EN55022 for the both Radiated and Conducted emissions limits.
DT4L SERIES
TO WHICH THIS DECLARATION RELATES
IS IN CONFORMITY WITH THE FOLLOWING STANDARDS
IEC 60950-1:2005(2nd Edition)+Am 1:2009, GB9254-2008 (Class A ) ; GB17625. 1-2012; GB4943.1-2011,
EN55022:2010 Class A, EN61000-3-2:006/A2:2009, EN61000-3-3:2008 and EN55024:1998/A1:2001/A2:2003,
IEC 61000-4-2:2008 series, UL 60950-1,2nd Edtion,2007-03-27, UL 60950-1,1st Edition,2007-10-31,
CSA C22.2 No.60950-1-07,2nd Edition, 2007-03, CSA C22.2 No. 60950-1-03, 1st Edition, 2006-07, CFR 47, Part 15
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
此为Class A产品，在生活环境中，该产品可能造成无线电干扰，在这种情况下，可能需要用户对其干扰采取切实可行
的措施。
DT2L/DT4L USER MANUAL
SAFETY INSTRUCTIONS
Please read the following instructions carefully.
1. Keep the equipment away from humidity.
2. Before you connect the equipment to the power outlet, please
check the voltage of the power source.
3. Make sure the printer is off before plugging the power connector
into the power jack.
4. It is recommended that you connect the printer to a surge
protector to prevent possible transient overvoltage damage.
5. Be careful not to get liquid on the equipment to avoid electrical
shock.
6. For safety and warranty reasons, ONLY qualified service personnel
should open the equipment.
7. Do not repair or adjust energized equipment under any
circumstances.
**** Danger of explosion if battery is incorrectly replaced. Replace only with the equivalent type recommended by
the manufacturer.
**** Dispose of used batteries according to the manufacturer’s instructions.
****Only use with designated power supply adapter model.
**** Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Specifications are subject to change without notice.
Caution
1Barcode Printer
1.1 Box Content
Please check that all of the following items are included with your printer.
USB Cable
DT4L Barcode Printer
CD
Including GoLabel software
and user manual.
AC Adapter
Cleaning Pen
DT4L Quick Guide
DT Series
Power Adapter
Power Cord
1Barcode Printer
1.2 Getting to Know Your Printer
Device Overview
Front View
LED indicator
FEED function button
Printer cover
Release buttons
On/off switch
Rear View
Power jack
USB port
Feed slot for continuous labels
Serial port (RS-232)
1Barcode Printer
Bottom View
Mounting points Cover on bottom of printer
1Barcode Printer
Print head release lever
Label roll holder
Print mechanism
Label supply hub
Label guides
Cutter Module
The Internal View of Printer
Platen cover Platen cover
Platen roller
Label sensor
2Printer Setup
2.1 Loading the Label Roll
1. Place the printer on a flat surface and open the printer cover.
2. Release the label supply hub.
3. Lift the label roll holder and
pull it out as far as possible.
4. Install the label roll on the label supply hub.
5. Now press the label roll holder down until it clicks into place.
2Printer Setup
6. Return the label roll holder to its original position.
7. Pass the label under the paper guides and pull it forward.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Godex Etikettendrucker Handbücher
Godex
Godex EZ-4TT Plus Bedienungsanleitung
Godex
Godex Stand Alone Printer Bedienungsanleitung
Godex
Godex T-10 Bedienungsanleitung
Godex
Godex EZ6000 Plus Series Bedienungsanleitung
Godex
Godex STE5 Bedienungsanleitung
Godex
Godex DT Series Bedienungsanleitung
Godex
Godex MX3 series: MX30 Bedienungsanleitung
Godex
Godex DT200+ Series Bedienungsanleitung
Godex
Godex EZPi-1300 Bedienungsanleitung
Godex
Godex EZ6000i Series Bedienungsanleitung
Godex
Godex DT200 Series Bedienungsanleitung
Godex
Godex C690LJ Bedienungsanleitung
Godex
Godex BP1000i Series Bedienungsanleitung
Godex
Godex ZX1000i+ Series Bedienungsanleitung
Godex
Godex RT700 SERIES Bedienungsanleitung
Godex
Godex G E300 Bedienungsanleitung
Godex
Godex EZ6000 Plus Series Bedienungsanleitung
Godex
Godex BZB-2U Bedienungsanleitung
Godex
Godex GE300 Bedienungsanleitung
Godex
Godex ZX1000i Series Bedienungsanleitung
