Godox RING72 Bedienungsanleitung

Instruction Manual

   

LED

Made in China



: 2

: 0755-29609320(8062) : 0755-25723423 : godox@godox.com

godox.com

Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,

Shenzhen, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com

GODOX Photo Equipment Co., Ltd.

Macro LED Ring Light

705-RYN720-00



QCPASS

Foreword

Warning

Be careful while using to protect it from crashing or falling.

Do not use in the too high or too low temperature environment.

And Do not use in rain or in damp conditions.

Do not use thinner, benzene or other cleaning agents to clean. It is

recommended to use a soft, moisturized cloth for wiping and cleaning this

product.

Store it in a dry, cool and well-ventilated place, if don't not use this product for

long time.

Names of Parts

Please read this manual carefully before using to make sure the correct operation

and exert the optimum function. Please keep the instruction manual for future

reference.

• Adopt 72 pieces premium LED beads ensure sufficient high-brightness light.

• Eight different adapter rings are included to fit a range of lens diameters from

49mm to 82mm (82mm adapter ring is not included).

• Separately control the brightness of the left/ring half to create side-lite effects.

• Coiled cord connects the ring light to the controller to provide extra convenience.

01. Ring Light

02. L Left Half Light

03. R Right Half Light

04. Coiled Connection

Cord

05. Controller

06. Battery Case

07. Battery Remove

Button

08. Battery

Compartment

09. Cold Shoe

10. Power ON/OFF

11. Left Half Adjustment Knob

12. Right Half Adjustment

Knob

13. L Left Half Light Button

14. R Right Half Light Button

15. Controller Power

Indicator

16. Mounting Ring Buckle

- 09 - - 10 -

Thank you for purchasing!

RING72 is a compact and portable LED ring light, whose light body can be installed

on the camera lens, and the controller can be installed on the camera hot shoe. The

brightness of the L left half and the R right half can be individually adjusted to

accurately obtain the required brightness by adjusting the buttons and knobs of the

controller. It is ideal for portrait shooting, jewelry shooting, insects and plants

shooting, and dental photography etc.

Main Features































Foreword

Warning

Be careful while using to protect it from crashing or falling.

Do not use in the too high or too low temperature environment.

And Do not use in rain or in damp conditions.

Do not use thinner, benzene or other cleaning agents to clean. It is

recommended to use a soft, moisturized cloth for wiping and cleaning this

product.

Store it in a dry, cool and well-ventilated place, if don't not use this product for

long time.

Names of Parts

Please read this manual carefully before using to make sure the correct operation

and exert the optimum function. Please keep the instruction manual for future

reference.

• Adopt 72 pieces premium LED beads ensure sufficient high-brightness light.

• Eight different adapter rings are included to fit a range of lens diameters from

49mm to 82mm (82mm adapter ring is not included).

• Separately control the brightness of the left/ring half to create side-lite effects.

• Coiled cord connects the ring light to the controller to provide extra convenience.

01. Ring Light

02. L Left Half Light

03. R Right Half Light

04. Coiled Connection

Cord

05. Controller

06. Battery Case

07. Battery Remove

Button

08. Battery

Compartment

09. Cold Shoe

10. Power ON/OFF

11. Left Half Adjustment Knob

12. Right Half Adjustment

Knob

13. L Left Half Light Button

14. R Right Half Light Button

15. Controller Power

Indicator

16. Mounting Ring Buckle

- 09 - - 10 -

Thank you for purchasing!

RING72 is a compact and portable LED ring light, whose light body can be installed

on the camera lens, and the controller can be installed on the camera hot shoe. The

brightness of the L left half and the R right half can be individually adjusted to

accurately obtain the required brightness by adjusting the buttons and knobs of the

controller. It is ideal for portrait shooting, jewelry shooting, insects and plants

shooting, and dental photography etc.

Main Features































Ring Light *1

Controller *1AA Battery Case *1

Adapter Rings (eight different lens diameters:

49mm, 52mm, 55mm, 58mm, 62mm,

67mm, 72mm, 77mm)

Instruction

Manual *1

Types of power supply

2 types power supply following for this macro LED ring light:

• 4 pieces size-AA large capacity alkaline batteries or 4 rechargeable Ni-MH batteries.

• 7.2V/2600mAh lithium battery supports 450 times of repeated charging and

discharging, and has a long using life span.

* Note:Batteries are sold separately and you can purchase it from us Godox. 2 types

Godox lithium battery(7.2V/2600mAh or 7.2V/3200mAh) following can be applied to this

Ring 72.

• Godox lithium battery VB26(shared with Godox TTL Li-ion Round Head Camera Flash V1).

• Godox lithium battery WB100(shared with Godox Pocket Flash AD100Pro).

What's in the Box

Precautions for using AA alkaline batteries

1. Keep the batteries connection clean and dry to maintain good contacts.

2. Use a new set of four batteries of the same brand. When replacing the batteries,

replacing all four at one time.

3. Do not disassemble or short-circuit the batteries. And do not put aside or into fire or

water.

4. Take the batteries out from the battery slot, if the light is not used for a long time.

- 11 - - 12 -

Precautions for using lithium battery

1. Avoid short-circuiting the positive and negative poles.

2. As the batteries do not have waterproof function, please take measures of

waterproof in rainy or damp environment.

3. Keep the product out of reach of children.

4. No over 24 hours' continuous charging.

5. Store in dry, cool, ventilated places.

6. Do not put the battery aside or into the fire.

7. Dead batteries should be disposed according to local regulations.

8. Please charge the battery to approx. 60% before being placed for long time.

9. If the battery had ceased using for over 3 months, please make a full recharge.

10. It's normal that the battery will be degraded after a period's usage for the

battery life limitation.

Installation tutorial

Install the battery

1.1 Use AA alkaline batteries or rechargeable Ni-MH

batteries

1.1.1 Put 4 pieces batteries into the battery case.

1.1.2 Align the battery case with the battery

compartment, and insert the battery case into the

battery compartment until the it be locked with a click

sound.

1.2. Use lithium battery(Lithium battery is

not included and you can purchase it

separately)

1.2.1 Align the battery with the battery

compartment, and insert the battery into

the battery compartment until the it be

locked with a click sound.

Ring Light *1

Controller *1AA Battery Case *1

Adapter Rings (eight different lens diameters:

49mm, 52mm, 55mm, 58mm, 62mm,

67mm, 72mm, 77mm)

Instruction

Manual *1

Types of power supply

2 types power supply following for this macro LED ring light:

• 4 pieces size-AA large capacity alkaline batteries or 4 rechargeable Ni-MH batteries.

• 7.2V/2600mAh lithium battery supports 450 times of repeated charging and

discharging, and has a long using life span.

* Note:Batteries are sold separately and you can purchase it from us Godox. 2 types

Godox lithium battery(7.2V/2600mAh or 7.2V/3200mAh) following can be applied to this

Ring 72.

• Godox lithium battery VB26(shared with Godox TTL Li-ion Round Head Camera Flash V1).

• Godox lithium battery WB100(shared with Godox Pocket Flash AD100Pro).

What's in the Box

Precautions for using AA alkaline batteries

1. Keep the batteries connection clean and dry to maintain good contacts.

2. Use a new set of four batteries of the same brand. When replacing the batteries,

replacing all four at one time.

3. Do not disassemble or short-circuit the batteries. And do not put aside or into fire or

water.

4. Take the batteries out from the battery slot, if the light is not used for a long time.

- 11 - - 12 -

Precautions for using lithium battery

1. Avoid short-circuiting the positive and negative poles.

2. As the batteries do not have waterproof function, please take measures of

waterproof in rainy or damp environment.

3. Keep the product out of reach of children.

4. No over 24 hours' continuous charging.

5. Store in dry, cool, ventilated places.

6. Do not put the battery aside or into the fire.

7. Dead batteries should be disposed according to local regulations.

8. Please charge the battery to approx. 60% before being placed for long time.

9. If the battery had ceased using for over 3 months, please make a full recharge.

10. It's normal that the battery will be degraded after a period's usage for the

battery life limitation.

Installation tutorial

Install the battery

1.1 Use AA alkaline batteries or rechargeable Ni-MH

batteries

1.1.1 Put 4 pieces batteries into the battery case.

1.1.2 Align the battery case with the battery

compartment, and insert the battery case into the

battery compartment until the it be locked with a click

sound.

1.2. Use lithium battery(Lithium battery is

not included and you can purchase it

separately)

1.2.1 Align the battery with the battery

compartment, and insert the battery into

the battery compartment until the it be

locked with a click sound.

2.1 Rotate and loosen the knob at the

bottom of the ring light controller.

2.2 Slide the ring light controller base mount

and insert it into the hot shoe socket of the

camera.

2.3 Tighten the knob at the bottom of the

controller until it is completely fixed.

Note: If you remove the LED light controller,

first loosen the knob and then slide it out

of the camera hot shoe.

3.1 This product is equipped with 8 different

types of adapter rings, which can fully match

the camera diameter of: 49mm, 52mm,

55mm, 58mm, 62mm, 67 mm, 72mm and

77mm.

3.2 Choose the corresponding adapter ring

and install it on the camera lens, and then

buckle the ring LED head on the adapter ring.

1. Turn on

Slide the power switch to "ON" and the LED

light will light up.

Use LED lights

How to install the LED light controller on the camera

How to install the ring LED head on the camera

2. Controller power indicator

display

The green light indicates the remaining power,

the four green lights indicate the remaining

100% power, the three green lights indicate

the remaining 75% power, the two bright

green lights indicate the remaining 50%

power, and the one green light indicates the

remaining 25% power.

Low battery reminder: When the first

indicator on the left flashes (on for one second

and off for one second), it indicates that the

battery is low. Please replace the battery in

time.

3 . L left half ON/OFF

L left half light button lights up green,

indicating that the L left half light is turned on;

short press can turn off the L left half light,

short press again to restore the previous

brightness value.

4. R right half ON/OFF

The R right half light button lights up green,

indicating that the R right half light is on;

short press can turn off the R right half light,

and short press again to restore the previous

brightness value.

- 13 - - 14 -

Note: The above power display is based on the

testing data of Godox. Different brands of batteries

will cause the battery indicator display to be different.

2.1 Rotate and loosen the knob at the

bottom of the ring light controller.

2.2 Slide the ring light controller base mount

and insert it into the hot shoe socket of the

camera.

2.3 Tighten the knob at the bottom of the

controller until it is completely fixed.

Note: If you remove the LED light controller,

first loosen the knob and then slide it out

of the camera hot shoe.

3.1 This product is equipped with 8 different

types of adapter rings, which can fully match

the camera diameter of: 49mm, 52mm,

55mm, 58mm, 62mm, 67 mm, 72mm and

77mm.

3.2 Choose the corresponding adapter ring

and install it on the camera lens, and then

buckle the ring LED head on the adapter ring.

1. Turn on

Slide the power switch to "ON" and the LED

light will light up.

Use LED lights

How to install the LED light controller on the camera

How to install the ring LED head on the camera

2. Controller power indicator

display

The green light indicates the remaining power,

the four green lights indicate the remaining

100% power, the three green lights indicate

the remaining 75% power, the two bright

green lights indicate the remaining 50%

power, and the one green light indicates the

remaining 25% power.

Low battery reminder: When the first

indicator on the left flashes (on for one second

and off for one second), it indicates that the

battery is low. Please replace the battery in

time.

3 . L left half ON/OFF

L left half light button lights up green,

indicating that the L left half light is turned on;

short press can turn off the L left half light,

short press again to restore the previous

brightness value.

4. R right half ON/OFF

The R right half light button lights up green,

indicating that the R right half light is on;

short press can turn off the R right half light,

and short press again to restore the previous

brightness value.

- 13 - - 14 -

Note: The above power display is based on the

testing data of Godox. Different brands of batteries

will cause the battery indicator display to be different.

5. Left half brightness adjustment

Power on ring light, L left half light button lights

up green indicating the L left half brightness is

on, turn the left half adjustment knob to adjust

the brightness of the L left half light.

Adjustment range: 10%-100%, 10 levels to

switch, and each level is incremented by

+10%.

6. Right half brightness adjustment

Power on ring light, R right half light button lights

up green indicating the R right half brightness is

on, turn the right half adjustment knob to adjust

the brightness of the R right half light.

Adjustment range: 10%-100%, 10 levels to

switch, and each level is incremented by

+10%.

7. Left half and Right half

brightness adjustment

Power on ring light, the L and R half light

buttons light up green indicating both the left

and the right half light brightness are on. And

then switch the Left half adjustment knob and

the Right half adjustment knob to set their

brightness freely.

Note: This ring light is divided into L left half light

and R right half light. The L and R rights’

brightness can be adjusted separately according

to user specific needs.

* Product design and specifications are subject to change without notice.

Technical Data

RING72

Separate control on the left / right half

10% - 100% adjustment in 10 levels

AA Size large capacity alkaline battery or

rechargeable Ni-MH battery (sold separately)

Lithium Battery (sold separately) 7.2V/2600mAh

5600K

72 pcs

≥97

≥96

Ring Light: φ132*30 mm

Controller: 84*71.5*50.5 mm

245g (ring light+controller) (battery not included)

Model

Output Power

Brightness Display

Dimming Range

Power Supply

Color Temperature

Number Of LED

Lamp Beads

TLCI

CRI

Volume

Net Weight

- 15 - - 16 -

1.5V*4 pieces

5. Left half brightness adjustment

Power on ring light, L left half light button lights

up green indicating the L left half brightness is

on, turn the left half adjustment knob to adjust

the brightness of the L left half light.

Adjustment range: 10%-100%, 10 levels to

switch, and each level is incremented by

+10%.

6. Right half brightness adjustment

Power on ring light, R right half light button lights

up green indicating the R right half brightness is

on, turn the right half adjustment knob to adjust

the brightness of the R right half light.

Adjustment range: 10%-100%, 10 levels to

switch, and each level is incremented by

+10%.

7. Left half and Right half

brightness adjustment

Power on ring light, the L and R half light

buttons light up green indicating both the left

and the right half light brightness are on. And

then switch the Left half adjustment knob and

the Right half adjustment knob to set their

brightness freely.

Note: This ring light is divided into L left half light

and R right half light. The L and R rights’

brightness can be adjusted separately according

to user specific needs.

* Product design and specifications are subject to change without notice.

Technical Data

RING72

Separate control on the left / right half

10% - 100% adjustment in 10 levels

AA Size large capacity alkaline battery or

rechargeable Ni-MH battery (sold separately)

Lithium Battery (sold separately) 7.2V/2600mAh

5600K

72 pcs

≥97

≥96

Ring Light: φ132*30 mm

Controller: 84*71.5*50.5 mm

245g (ring light+controller) (battery not included)

Model

Output Power

Brightness Display

Dimming Range

Power Supply

Color Temperature

Number Of LED

Lamp Beads

TLCI

CRI

Volume

Net Weight

- 15 - - 16 -

1.5V*4 pieces

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

- 17 - - 18 -

Maintenance

• When the flash is working, if an abnormality is found, the power should

be turned off immediately to find out the cause.

• The lamp body should avoid vibration, and always pay attention to dust

removal on the surface.

• It is normal that the lamp body is slightly hot. Do not flash continuously

when there is no special need.

• All repairs are handled by the repair department designated by the

factory for original parts.

• One year warranty, consumables such as lamps are not covered by one

year warranty.

• All maintenance shall be handled by the maintenance department

designated by the factory.

• If this product breaks down or gets wet, it can be used only after

professional repairs.

• Subject to technical changes without notice.

Inhaltsverzeichnis

Andere Godox Beleuchtungsausrüstung Handbücher

Godox

Godox LDX100 Bi Bedienungsanleitung

Godox

Godox LC500 Bedienungsanleitung

Godox

Godox LEDP260C Bedienungsanleitung

Godox

Godox M1 Bedienungsanleitung

Godox

Godox UL150 Bedienungsanleitung

Godox

Godox ML-150 II Bedienungsanleitung

Godox

Godox LP75R Bedienungsanleitung

Godox

Godox SL150IIBi Bedienungsanleitung

Godox

Godox DPIII Series Bedienungsanleitung

Godox

Godox DS300II Bedienungsanleitung

Godox

Godox 2ABYN004 Bedienungsanleitung

Godox

Godox Quicker600IIM Bedienungsanleitung

Godox

Godox UL150II Bedienungsanleitung

Godox

Godox ST250 Bedienungsanleitung

Godox

Godox LD75R Bedienungsanleitung

Godox

Godox VL150 Bedienungsanleitung

Godox

Godox R2400 Bedienungsanleitung

Godox

Godox LED1000D II Bedienungsanleitung

Godox

Godox LEDP120C Bedienungsanleitung

Godox

Godox S30 Bedienungsanleitung

Godox

Godox AD300Pro Bedienungsanleitung

Godox

Godox Knowled M600D Bedienungsanleitung

Godox

Godox LED500 Bedienungsanleitung

Godox

Godox ML60 LED Light Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung