GOEBEL GO-100 Bedienungsanleitung
GO-100 GO-100+ GO-200
Manual
w w w . g o e b e l - g r oup.com
UL
®
Manual Goebel
GO-100, GO-100+ and GO-200
Battery-powered Riveting Tools
1. Battery-powered Riveting Tool 4
1.1 Work Capacity 4
1.2 Equipment and Accessories 4
1.3 Technical Data 6
1.4 Parts List 7
2. Operation Instructions 10
2.1 Starting instruction 10
2.2 Operating instruction 10
2.3 Trouble Shooting 11
3. Battery and Charger 12
3.1 Technical Data 12
3.2 Battery Charging and Safety Instructions 12
3.2.1 Charging 12
3.2.2 Battery Safety Instructions 13
3.2.3 Charger Safety Instructions 13
4. Maintenance and Service 13
4.1 Maintenance 13
4.2 Service 14
5. Operation Safety Instructions 14
15
6.1 Warranty 15
16
17
GO-100 fig. B
GO-100+ fig. A
GO-100+ fig. B
GO-200 fig. A
18
19
20
3
21
22
1. Battery-powered Riveting Tools
1.1 Work Capacity
Model GO-100 for standard blind rivets all materials dia 3/32“ up to 3/16“
(2.4 mm up to 5.0 mm).
Model GO-200 for high strength blind rivets all materials dia 5/32“ up to 1/4“
(4.0 mm up to 6.4 mm).
(When setting rivets dia 3/32“ up to 1/8“ (2.4 mm up to 3.2 mm) with GO-200,
relevant nose pie
ces and push pin set should be purchased separately
1.2 Equipment and Accessories
1. nose pieces 2. front sleeve
3. hook 4. power illustration
5. mandrel collector 6. warning light
7. trigger 8. battery
9-11. accessories
Accessories
• Nose piece (2.4mm)blind rivets, stored in toolkit
• Nose piece (3.0/3.2mm)blind rivets,
stored in tool kit
• Nose piece C – for riveting dia. 5/32“ (4.0mm)blind rivets, stored in tool kit
• Nose piece D – for riveting dia. 3/16“ (4.8/5.0mm) blind rivets equipped on
tool
• Wrench – for nose pieces changing
• Battery charger set
• Battery(s) 14.4V 1,4Ah/4-cell or/and 14.4V 2,8Ah/8-cell
4
and replaced on tool)
A - for riveting dia 3/32“
B - for riveting dia 1/8“
Model GO-100+ for Triple Claw Blind Rivets dia 3/16“ up to 9/32“
(5.2 mm up to 7.5 mm)
1. nose pieces 2. front sleeve
3. hook 4. power illustration
5. mandrel collector 6. warning light
7. trigger 8. battery
9-15. accessories 16. 3-jaw set
5
Model GO-100+ Refer to GO-100+ fig. A
1. nose pieces 2. front sleeve
3. hook 4. power illustration
5. mandrel collector 6. warning light
7. trigger 8. battery
9-10. accessories
• Nose piece 22 – for riveting dia 3/16“ (5.2 mm) triple claw blind rivets,
equipped on tool
• Nose piece 23 – for riveting dia 1/4“ (6.4 mm) triple claw blind rivets,
stored in tool kit
• Nose piece 24 – for riveting dia 9/32“ (7.5 mm) triple claw blind rivets,
stored in tool kit
• Wrench – for nose pieces changing
• Battery charger set
• Battery(s) 14.4V 1.1 Ah/4-cell or/and 14.4V 2.8Ah/8-cell
Accessories
Accessories
• Nose piece C - for riveting dia. 5/ 32“ ( 4.0 mm) blind rivets, stored in tool kit
• Nose piece D - for riveting dia. 3/16“ (4.8/5.0 mm) blind rivets; stored in tool kit
• Nose piece E – for riveting dia. .2 36“(6 .0 mm) blind rivets, stored in tool kit
• Nose piece F – for riveting dia. 1/ 4“ (6 .4m m) blind rivets, equipped on tool
• Nose piece G – for M-LOCK 3/16“ (4.8 mm) structural rivets, stored in tool kit
1.3 Technical Data
Model GO-100
Tool weight 4,52 lbs (2,05 kg) (incl. 4-cell battery)
Stroke 20 mm (787” )
Drive unit 14,4V direct current motor
Traction power >12,000N (2,247 lbs)
Model GO-200
Tool weight 4,52 lbs (2,05 kg) (incl. 4-cell battery)
Stroke 27 mm (1.063” )
Drive unit 14,4V direct current motor
Traction power >18,000N (4,045 lbs)
6
Model GO-100+
Tool weight 4,52 lbs (2,05 kg) (incl. 4-cell battery)
Stroke 20 mm (787” )
Drive unit 14,4V direct current motor
Traction power >12,000N (2,247 lbs)
• Nose piece H – for PREMIUM and H-LOCK 3/16“ (4.8 mm) high strength
blind rivets, stored in tool kit
• Nose piece J – for M-LOCK 1/4“ ( 6.4 mm) high strength blind rivets,
stored in tool kit
• Nose piece K – for PREMIUM and H-LOCK 1/4“ (6.4 mm)
high strength blind rivets, stored in tool kit
• Wrench – for nose pieces changing
• Battery charger set
• Battery(s) 14.4V 1,4V 1,4Ah/4-cell or/and 14.4V 2,8Ah/8 -cell
1.4 Parts List
Position art. code parts description quantities on tool
1 22660 00036 Nosepiece 22 3/16“ 1
2 22660 00017 Front Sleeve Set 1
3 22660 00018 Clamping Sleeve 1
4 22660 00019 3-jaw Set 1
5 22660 00020 Push Pin Set 1
6 22660 00021 Push-pin Spring 1
7 22660 00022 Spring Sleeve Set 1
8 22660 00047 Flat Cross Head Screws 2
9 22660 00064 Power Illustration 1
10 22660 00065 Power Illustration Cable 1
11 22660 00060 Tool Body Set Goebel GO-100 1
12 22660 00042 Mandrel Release Tube 1
13 22660 00052 Mandrel Collector 1
14 22660 00045 PCB Set 1
15 22660 00059 Gear Box Set 1
16 22660 00053 Motor 1
17 22660 00055 Machine Screws 2
18 22660 00056 Li-Ion Battery 14,4V 1,4Ah/4-cell 1
19 22660 00057 Li-Ion Battery 14,4V 2,8Ah/8-cell 1
20 22660 00158 Battery Charger Set 1
21 22660 00029 Wrench 1
22 22660 00077 Nosepiece 23 1/4“ 1
23 22660 00078 Nosepiece 24 9/32“ 1
7
(5,2mm)
(7.5mm)
(6.4mm)
+
1.4 Parts List
Position art. code parts description quantities on tool
1 22660 00036 Nosepiece 22 3/16“ 1
2 22660 00017 Front Sleeve Set 1
3 22660 00018 Clamping Sleeve 1
4 22660 00019 3-jaw Set 1
5 22660 00020 Push Pin Set 1
6 22660 00021 Push-pin Spring 1
7 22660 00022 Spring Sleeve Set 1
8 22660 00047 Flat Cross Head Screws 2
9 22660 00064 Power Illustration 1
10 22660 00065 Power Illustration Cable 1
11 22660 00060 Tool Body Set Goebel GO-100 1
12 22660 00042 Mandrel Release Tube 1
13 22660 00052 Mandrel Collector 1
14 22660 00045 PCB Set 1
15 22660 00059 Gear Box Set 1
16 22660 00053 Motor 1
17 22660 00055 Machine Screws 2
18 22660 00056 Li-Ion Battery 14,4V 1,4Ah/4-cell 1
19 22660 00057 Li-Ion Battery 14,4V 2,8Ah/8-cell 1
20 22660 00158 Battery Charger Set 1
21 22660 00029 Wrench 1
22 22660 00077 Nosepiece 23 1/4“ 1
23 22660 00078 Nosepiece 24 9/32“ 1
8
(5.2mm)
(7.5mm)
(6.4mm)
+
1.4 Parts List
position art. code part description quantities on tool
1 22660 00069 Nosepiece F (6.4 mm) 1
2 22660 00017 Front Sleeve Set 1
3 22660 00018 Clamping Sleeve 1
4 22660 00048 3-jaw Set for 6.4 mm 1
5 22660 00049 Push Pin Set 1
6 22660 00021 Push-pin Spring 1
7 22660 00067 Spring Sleeve Set for 1/4“ 1
8 22660 00047 Flat Cross Head Screws 2
9 22660 00064 Power Illustration 1
10 22660 00065 Power Illustration Cable 1
11 22660 00061 Tool Body Set Goebel GO-200 1
12 22660 00051 Mandrel Release Tube 1
13 22660 00052 Mandrel Collector 1
14 22660 00046 PCB Set 1
15 22660 00062 Gear Box Set 1
16 22660 00054 Motor 1
17 22660 00055 Machine Screws 2
18 22660 00056 Li-Ion Battery 14,4V 1,4Ah/4-cell 1
19 22660 00057 Li-Ion Battery 14,4V 2,8Ah/8-cell 1
20 22660 00158 Battery Charger Set 1
21 22660 00029 Wrench 1
22 22660 00019 3-jaw Set for 3/32“-3/16“ 1
23 22660 00073 Nosepiece K for PREMIUM/H-LOCK 1/4“ 1
24 22660 00072 Nosepiece J for M-LOCK 1/4“ 1
25 22660 00071 Nosepiece H for PREMIUM/H-LOCK 3/16“ 1
26 22660 00070 Nosepiece G for M-LOCK 3/16“ 1
27 22660 00068 Nosepiece E .236“ 1
28 22660 00316 Nosepiece D 3/16“ 1
29 22660 00532 Nosepiece C 5/32“ 1
9
(1/4“)
(2.4-5.0mm)
(6,4 mm)
(6.4mm)
(6.4mm)
(4.8mm)
(4.8mm)
(6.0mm)
(4.8/5.0mm)
(4.0mm)
2. Operating Instructions
2.1 Starting instructions
Install battery on tool, check battery power on power indication:
4 LED lights on, power 95% ±5%;
3 LED lights on, power 75% ±5%;
2 LED lights on, power 50% ±5%;
1 LED light on, power 25% ±5% remaining,
charging battery is recommended.
During tool operation, press the button on power indication and the remai-
ning power is shown.
- Choose correct nose piece and it onto the tool
(see 1.2)
- Ensure that vent holes on the tool body are not covered or
obstructed
- Ensure that the mandrel collector is installed onto the tool
2.2 Operating instruction
- Insert the rivet mandrel fully into the nose piece, install it onto the
work piece, start the operation by depressing the trigger.
- After the rivet is set, release the trigger and the jaw assembly of the
tool returns to the start position automatically.
- Eject the rest mandrel by tilting to the rear into the mandrel
collector, or to the front through the nose piece.
- The tool is equipped with overload protection.
In the event of an overload, the operation will be stopped and the
warning light shows. Release the trigger and the jaw assembly will
return to the start position.
10
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere GOEBEL Nietwerkzeuge Handbücher
