GOEBEL GO-RN1 Bedienungsanleitung
innovative fastener solutions
GO - RN1
GO - RN2
GO - SN1
Cordless Blind Rivet Nut Battery Tool
User Manual
2| Deutsch1| English
Instruction manual: GO-RN1 / GO-RN2 / GO-SN1
Table of contents
www.goebelfasteners.com
Page
Safety precautions 2 - 4
Daily maintenance & environmental protection 4
1. Tools overview
1.1 Capacity
1.1 Technical parameters
1.2 Conguration/ Accessories (see g. A)
1.3 Part list (see Fig. B)
1.4 GO-RN series tool parts list
4
5
5
5 - 6
7
8
2. Preparation of the tool
2.1 Exchange of the mandrels
2.2 Setting the mandrel
2.3 Checking the battery
2.4 Checking the tool
9
9
9
10
11
3. Function setting
3.1 Adjusting the traction force
3.2 Adjusting the stroke
3.3 Setting the riveting mode
3.4 Riveting in fully automatic riveting mode
3.5 Riveting in conventional riveting mode
11
11
12 - 13
14
14
14
4. Tool Operation
(important tips before starting work)
4.1 Instructions for presetting the blind rivet nut
4.2 Checking the set blind rivet nut
4.3 Unscrewing blind rivet nuts manually
4.4 Setting instructions for the riveting process
4.5 Riveting in special applications
15
15
16
16
17
17
5. Charger & Batteries
5.1 Technical parameters
5.2 Use of the charger
5.3 Use of the battery
18
18
18
18
6. FAQ (Questions / Answers) 19
7. Troubleshooting
7.1 Malfunctions
7.2 Possible causes
7.3 Corrective measures
19
19
19
19
8. Protection conditions & CE certication 20
Deutsch | 2English | 2
To reduce the risk of electric shock, personal injury, re and property damage, be sure
to follow the safety precautions below.
Description of the symbols:
Safety precautions
Danger
Indicates imminent hazards which, if not avoided will result in serious injury or death
Warning
Indicates potential hazards which, if not avoided could result in serious injury or death
Caution
Indicates potential hazards which, if not avoided may result in minor injury or loss of property
The following symbols are used to classify and describe the types of description to be
followed.
This sign is used to alert the user to the prohibited action steps.
This sign is used to draw users' attention to the operating steps that must be
carried out to use the appliance
• This tool is restricted to riveting blind rivet nuts and must not be used for impact
or other purposes, such as a hammer.
• Do not overload the blind rivet nut tool. Please use it only within the range speci-
ed in the function settings (see page 10-12).
• Do not block the ventilation openings of the motor. Do not insert any objects into
the ventilation openings.
• It is recommended to wear safety glasses and personal protective equipment
such as gloves, hard hat, safety shoes, noise-insulating earplugs, fall protection
devices and take other necessary protective measures when using this tool.
• Please keep the packaging boxes and accessories in a safe place and handle
them with care.
• The tool and accessories should be placed in the plastic case, kept in a dry place
and out of the reach of children.
Please keep the packaging boxes and accessories and handle them with care.
• The tool and accessories should be placed in the plastic case, stored in a dry place
and out of the reach of children.
www.goebelfasteners.com
Caution
2| Deutsch3| English
Safety precautions
Use of the battery
• Do not charge damaged, contaminated or wet batteries.
• Batteries must not be thrown into water or re at any time, and used batteries must
not be disposed of at will.
• Do not charge when the ambient temperature is below 0°C or above 45°C.
Use of the charger
• The original battery and the manufacturer's charger must be used for charging.
• The battery must not be charged with a damaged, dirty or damp charger.
• Do not place metal objects in the charging area as a short circuit may occur.
• This charger must not be used by persons with disabilities, mental disabilities or
persons without training or knowledge unless a safety ofcer is on site to supervise
or instruct them in the use of the charger.
Danger
• Do not use the riveting tool in a damp environment or near ammable liquids and
gases. Risk of explosion!
• Do not point the riveting tool at yourself, others or animals.
• Do not load in a damp environment, near an open re or in an environment with
ammable, highly combustible gases that can easily be detonated.
Warning
• Tools should be placed so that they do not fall down to avoid unnecessary damage
and safety accidents.
• When installing the battery, make sure to x its position. An audible "click" sound will
indicate that the battery is in place.
• When servicing this riveting tool, the battery must be removed.
• Before charging, check that the charger and its power supply equipment are in good
condition.
• Use a power supply unit that matches the charger.
• Plugs, power cords and chargers should be checked regularly. If a problem is found, it
should be repaired by qualied maintenance personnel.
• Maintenance personnel must have professional skills; only qualied professionals
can carry out repairs. If in doubt, please return the unit to the authorised dealer or
manufacturer for repair.
• Original spare parts must be used during maintenance.
www.goebelfasteners.com
Deutsch | 2English | 4
1. Tool overview
1
2
3
4
5
6
7
8
9
10
Component
Maintenance
• Regular maintenance prolongs the life of tools with a lithium battery and should be
carried out by an authorised dealer or manufacturer. In case of more frequent use, it
is recommended to carry out maintenance in advance.
• Maintenance of the riveting tool is limited only to replacement of worn parts and
quick wear parts. (see Pg.8 for replacement accessories).
• To keep the tools in good working condition, please check the wear parts of the tools
frequently. In case of wear or damage, please contact the dealer for purchase.
Repair
• The warranty period is 1 year from the date of sale. Excluded from this are quick wear
parts noted on page 8.
• Failure to comply with the relevant installation and commissioning instructions or
failure to follow the operating procedures may void the warranty.
Environmental protection and resource recovery
• When replacing lithium batteries used in this product, be sure to observe the following
points:
• If your country or region has regulations, please be sure to take the old battery to a
professional company for disposal.
• Do not throw old batteries into the trash, re or water!
1
2
3
4
5
6
7
8
9
10
Threaded sleeve
Mandrel
Steel sleeve
Function display
Battery
Back cover
Tool housing
LED lighting
Trigger
Charger
www.goebelfasteners.com
2| Deutsch5| English
1.1 Capacity / Technical Parameters
260
21.5 21.5 21.5
GO-RN1
10.62 11.5 2.16
10.2
2.68
1.46
3.62
1.75
3.62
2.52
2.52
3.68
0.85
Model GO-RN1 GO-RN2 GO-SN1
Motor 18V Brushless motor
Noise level < 78dB
Riveting mode Conventional riveting mode / Fully automatic riveting mode
Traction force 4000 lbft 6000 lbft 4700 lbft
Stroke .25" (adjustable) .375" (adjustable) .625" (adjustable)
Net weight (incl. battery) 3.3 lbs 3.62 lbs 3.62 lbs
Capacity 6/32 ~ 5/16-18UNC 10-24 ~ 1/2-13UNC 10-24 ~ 3/8-16UNC
Material specication All materials and specications of round shank, semi
and full hexagonal blind rivet nuts.
Split blind rivet nuts -
all materials
1.2 Conguration / Accessories
(Fig. A)
11.87
3.62
2.52
4.5 4.9
0.93
0.93
1.75
1.75
GO-RN2 GO-SN1
www.goebelfasteners.com
Deutsch | 2English | 6
1.2 Conguration* / Accessories (see g. A)
www.goebelfasteners.com
NO Parts description Code Spec Qty. NO Parts description Code Spec Qty.
18
Battery Li-Ion 18V 2.0 Ah
2277012410
2 21 Wrench
2277012310
1
19 Battery Charger
2277012510
1 22 ABS casing
2277013310
2
20 Allen key
2270000213
1
NO Parts description Code Spec Qty. NO Parts description Code Spec Qty.
1Anvil
2277030111
1/4-20 1 7 Anvil
2277032010
5/16-18 1
2Counter nut
2277030210
1 11
Mandrel
2277032411
6-32 1
3 Mandrel
2277030311
1/4-20 1 12
2277032511
8-32 1
4
Anvil
2277031711
6-32 1 13
2277032611
10-24 1
5
2277031811
8-32 1 14
2277032711
5/16-18 1
6
2277031911
10-24 1 26 Rivetbolt-puller
2277032961
8-32 1
22 Rivetbolt-puller
2277032981
1/4-20 24 Rivetbolt-puller
2277032971
10-24
GO - RN1 Conguration
* General conguration
NO Parts description Code Spec Qty. NO Parts description Code Spec Qty.
1a Anvil
2277030111
1/4-20 1
13a
Mandrel
2277032611
10-24 1
2a Counter nut
2277030210
1
14a
2277032711
5/16-18 1
3a Mandrel
2277030311
1/4-20 1
15a
2277032821
3/8-16 1
6a
Anvil
2277031911
10-24 1 16
2277033020
1/2-13 1
7a
2277032010
5/16-18 1 24 Rivetbolt-puller
2277032971
10-24 1
8
2277032121
3/8-16 1 22 Rivetbolt-puller
2277032981
1/4-20 1
9
2277032320
1/2-13 1 20 Rivetbolt-puller
2277032991
5/16-18 1
GO - RN2 Conguration
NO Parts description Code Spec Qty. NO Parts description Code Spec Qty.
1a Anvil
2277030111
1/4-20 1 8 Anvil
2277032121
3/8-16 1
2a Counter nut
2277030210
1
13b
Mandrel
2277052611
10-24 1
3b Mandrel
2277050311
1/4-20 1
14b
2277052711
5/16-18 1
6a Anvil
2277031911
10-24 1
15b
2277052811
3/8-16 1
7a
2277032010
5/16-18 1
GO - SN1 Conguration
2| Deutsch7| English
Abb. B
Abb. B
1.3 Part list (Fig. B)
www.goebelfasteners.com
Deutsch | 2English | 8
1.4 Tool Parts list of the GO-RN series (see Fig. B)
*Please note that the shaded parts in the list are wear parts, serial numbers 8, 9, 13 are structural parts, serial numbers a, b and c
are their own exclusive parts for tools, and the rest are general parts.
www.goebelfasteners.com
NO Standard Code Parts description Qty. NO Standard Code Parts description Qty.
62277031410 Spring 1 15 2277031510 Trigger 1
92277030710 Gearbox 1 16 2277031610 Control unit 1
10 2277031010 Tool body screw 9 31 2277031610 Battery Li-Ion 18V 2.0 Ah 1
11 2277031110 Tool Body GO-RN 1 32 2277012510 Battery Charger Set 1
12 2277031210 Back Cover 1 33 2270000213 Allen key 1
14 2277031510 Trigger spring 1 34 2277012310 Wrench 1
NO Standard Code Parts description Qty. NO Standard Code Parts description Qty.
12277030111 Anvil 1/4-20 1 17 2277031711 Anvil 6-32 1
22277030210 Counter nut 1 18 2277031811 Anvil 8-32 1
32277030311 Mandrel 1/4-20 1 19 2277031911 Anvil 10-24 1
42277030410 Schraubkappe 1 20 2277032010 Anvil 5/16-18 1
52277030510 Anvil pedestal assembly 1 24 2277032411 Mandrel 6-32 1
72277030710 Gearbox 1 25 2277032511 Mandrel 8-32 1
82277030810 Brushless motor 1 26 2277032611 Mandrel 10-24 1
13c
2277031310 PCB Set 1 27 2277032711 Mandrel 5/16-18 1
2277032961 Rivbolt-puller 8-32 12277032981 Rivbolt-puller 1/4-20 1
2277032971 Rivbolt-puller 10-24 1
GO-RN1 Parts List
NO Standard Code Parts description Qty. NO Standard Code Parts description Qty.
1a 2277030111 Anvil 1/4-20 1
20a
2277032010 Anvil 5/16-18 1
2a 2277030210 Counter Nut 1 21 2277032121 Anvil 3/8-16 1
3a 2277030311 Mandrel 1/4-20 1 22 2277032320 Anvil 1/2-13 1
4a 2277030410 Screw cap 1
26a
2277032611 Mandrel 10-24 1
5a 2277030510 Anvil pedestal assembly 1
27a
2277032711 Mandrel 5/16-18 1
7b 2277030720 Gearbox 1
28a
2277032821 Mandrel 3/8-16 1
8b 2277030820 Brushless motor 1 29 2277033020 Mandrel 1/2-13 1
13b
2277031320 PCB Set 12277032971 Rivbolt-puller 10-24 1
19a
2277031911 Anvil 10-24 12277032981 Rivbolt-puller 1/4-20 1
2277032991 Rivbolt-puller 5/16-18 1
GO-RN2 Parts List
NO Standard Code Parts description Qty. NO Standard Code Parts description Qty.
1a 2277030111 Anvil 1/4-20 1
13b
2277051310 PCB-Set 1
2a 2277030210 Counter Nut 1
19a
2277031911 Anvil 10-24 1
3b 2277050311 Mandrel 1/4-20 1
20a
2277032010 Anvil 5/16-18 1
4a 2277030410 Screw Cap 1 21 2277032121 Anvil 3/8-16 1
5a 2277030510 Anvil pedestal assembly 1
26b
2277052611 Mandrel 10-24 1
7a 2277050710 Gearbox 1
27b
2277052711 Mandrel 5/16-18 1
8a 2277030810 Brushless Motor 1
28b
2277052811 Mandrel 3/8-16 1
GO-SN1 Parts List
List of common parts: GO-RN1, GO-RN2, GO-SN1
2| Deutsch9| English
2. Preparation of the tool
Danger - 2.1 Exchange of the mandrels
Make sure that you remove the battery from the riveting tool before replacing the mandrel
and nosepiece, otherwise there is a risk of injury! Select the appropriate mandrel with
corresponding nosepiece that match the size of the blind rivet nut. The procedure for
replacing the components is shown in the following illustration:
Before operating the riveting tool, please read the following important instructions carefully.
Make sure that the battery has been removed from the tool as shown in gure ①In the
order shown above: ② loosen the lock nut with the wrench, then ③ unscrew the threaded
sleeve. ④ Guide the round hole of the wrench onto the threaded mandrel. ⑤ Now, use the
wrench to depress the sleeve in the direction of the arrow. ⑥While depressing the sleeve
unscrew the threaded mandrel.
While making sure the battery is still removed from the tool, ① align the round hole of the
wrench with the mandrel. ② Press the sleeve down in the direction of the arrow and hold in
place. ③ While depressing the sleeve, the mandrel is screwed in a clockwise direction by
hand until the hexagonal part of the mandrel is ush with the sleeve once released. ④The
nosepiece is screwed on and ⑤ the counter nut is tightened with the wrench. ⑥ Last, the
battery is inserted onto the tool.
www.goebelfasteners.com
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere GOEBEL Nietwerkzeuge Handbücher
