Graco EP2 Bedienungsanleitung

Pump Assembly Instructions

EP2 Hose Pump Assembly 406953B

EN

To assemble the roller kit to an EP2 Hose Pump.

For professional use only.

NOTE: Parts included in the kit are marked with an asterisk (*).

See your EP2 Hose Pump Repair Manual for a complete list of

Kit Part Numbers.

1. Remove the cover (12) and gasket (11).

2. Pull the hose out of the bottom of the housing (103) at the

6 o’clock position.

3. Move the eccentric shaft (7) to the 6 o’clock position.

4. Lubricate the eccentric shaft (7) with hose lube. Install

the roller (102*) and the roller retaining ring (8*).

5. Turn the motor fan to move the roller (102) to the 12

o’clock position. Push the hose (103) into the housing.

Use a rubber mallet if the hose is difficult to seat.

Continued.

TI18220a

12

11

1

Lubricate with hose lube.

1

TI18221a

7

8*

102*

TI18224a

102

103

Important Safety Instructions

Before beginning, read all warnings and instructions in this manual

and in your related equipment manuals. Save all instructions. This

manual is only a guide for kit installation. See your EP2 Hose Pump

manual for complete warnings and repair instructions.

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

Original instructions. This manual contains English. MM 406953

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS, MN 55440-1441 • USA

Copyright 2011, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.

www.graco.com

Revised June 2012

6. Return the roller (102) to the 6 o’clock position, com-

pressing the hose. It is critical that the roller is at the bot-

tom of the pump to ensure the correct capacity of hose

lube. Reinstall the motor fan cover.

7. Install the gasket (11) and front cover (12). Install the

screws (14) and washers (13). Torque oppositely to 25

in-lb (2.8 N•m).

NOTE: Do not over-tighten the front cover screws. This will

cause the gasket to deform and the pump to leak.

8. Add hose lube as explained in your EP2 Pump Repair

Manual.

NOTICE

The roller must be returned to the 6 o’clock position before

installing the front cover. Failure to do so will result in overfill-

ing the pump with hose lube.

TI18225a

12

11

13

14

102

3

Torque oppositely to

25 in-lb (2.8 N•m).

3

Inhaltsverzeichnis

Andere Graco Wasserpumpe Handbücher

Graco

Graco BULLDOG HYDRA-CAT E Series Bedienungsanleitung

Graco

Graco Eagle A Series Datenblatt

Graco

Graco Monark Bedienungsanleitung

Graco

Graco SaniForce 1040 Handbuch

Graco

Graco Power-Flo Senator Bedienungsanleitung

Graco

Graco Dyna-Star 224912 Bedienungsanleitung

Graco

Graco Viscount I 3000 Bedienungsanleitung

Graco

Graco Monark C Series Bedienungsanleitung

Graco

Graco D51 Bedienungsanleitung

Graco

Graco PRESIDENT 965-124 Bedienungsanleitung

Graco

Graco HFR Bedienungsanleitung

Graco

Graco President A Series Bedienungsanleitung

Graco

Graco Series A Bedienungsanleitung

Graco

Graco ToughTek MP-Series Bedienungsanleitung

Graco

Graco Fast-Ball 100 Bedienungsanleitung

Graco

Graco Check-Mate Elite Series Bedienungsanleitung

Graco

Graco Series A Bedienungsanleitung

Graco

Graco Husky 1040 Bedienungsanleitung

Graco

Graco Check-Mate 312375J Bedienungsanleitung

Graco

Graco Dyna-Star 236753 Bedienungsanleitung

Graco

Graco Series A Einrichtungshandbuch

Graco

Graco Orion 245934 Bedienungsanleitung

Graco

Graco Husky 1050HP Gebrauchs- und Pflegehandbuch

Graco

Graco Husky 716 series Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung