GREAT PLAINS Nutri-Pro NP30A Bedienungsanleitung

Installation Instructions for Nutri-Pro Tire Scraper

for the NP30A, NP30L, NP40A, NP40L, NP1540AA, NP1540LL, NP1330AA, NP1330LL,

NP1340AA, NP1340LL

Before Getting Started

Before you begin installation of your Nutri-Pro Tire

Scraper, read these instructions carefully and check that

all parts and tools in kit are accounted for. All hand and

specialty tools for installation are provided at owner’s

expense. Please retain these installation instructions for

future reference and parts ordering information.

These installation instructions contain information for

assembling the Nutri-Pro Tire Scraper to the main

machine. Please read all instructions in your Nutri-Pro

operator manual thoroughly before proceeding.

Instructions contain information for all makes and models

of the applicable machines.

General Information

The Nutri-Pro Tire Scraper cleans mud and debris from

gauge wheel tires during operation.

Tools Required

The following tools are required for installation:

general hand tools

wire or rod welder and welding safety equipment

fire extinguisher

Great Plains green spray paint, 821-001C

Refer to page 10 for torque values chart.

Further Assistance

If for any reason you do not understand any part of this

manual or are otherwise dissatisfied, please contact:

Great Plains Service Department

1525 E. North St.

P.O. Box 5060

Salina, KS 67402-5060

Or go to www.greatplainsag.com and follow the contact

information at the bottom of your screen for our service

department.

Recommended Manuals

All manuals related to this kit are available free of charge

by visiting www.greatplainsag.com. Have machine model

and serial numbers available.

Refer to page 2 for a detailed list of parts included in the

Nutri-Pro Tire Scraper Field Kit. Use this list to inventory

parts received.

68240a

Nutri-Pro Parts Manuals

MANUAL, PARTS, NUTRI-PRO 407-313P

MANUAL, 1330/1340&1540 PARTS 417-480P

Nutri-Pro Tire Scraper Reference #

NP TIRE SCRAPER FIELD KIT 427-041K

Nutri-Pro Tire Scraper

2Great Plains | 427-051M

Kit Contents

NOTE:

The part callout numbers in this list match all Figures in these installation instructions.

Reference Part Number Part Description Qty.

11 802-090C PLOW 7/16-14X1 3/4 GR5 4

12 820-405C SWEEP 11 REGULAR 2

13 803-169C NUT HEX FLG LOCK 1/2-13 PLT 4

14 804-015C WASHER LOCK SPRING 1/2 PLT 4

15 427-001D SHANK MOUNT 2

16 803-088C NUT HEX LOCK 1/4-20 FLG 16

17 427-002D SCRAPER PIVOT 2

18 417-106C RHSNB 1/2-13X1 1/2 PLT 4

19 891-248C MUFFLER CLAMP 1 1/2 SIZE 8

20 803-245C NUT HEX NYLOCK 7/16-14 PLT 4

21 803-020C NUT HEX 1/2-13 PLT 4

22 804-015C WASHER LOCKER SPRING 1/2 PLT 4

23 417-789D MOUNT PLT 1

24 427-040H NP TIRE SCRAPER MNT 2

25 417-795D LOCATOR MNT 417-929K, 417-930K 1

26 417-797D LOCATOR MNT 417-931K 1

27 802-034C HHCS 1/2-13X1 1/4 GR5 4

TP-71162a

21 22 23

01/30/19 3

Installation Instructions

Preparation

Move the machine to a solid, level surface. Make

sure the surface is free of any flammable material.

Park and secure the implement.

Getting Started

Check that all parts in the kit are accounted for. Refer

to the parts list on page 2.

Make sure any required tools are on hand. See

“Tools Required” on page 1 for a general list of

recommended tools for installation.

1 Light Gauge Wheel

These instructions are for installing the tire scraper

to a light gauge wheel.

If your gauge wheel does not have the two

mounting holes (1), follow the instructions at

step 1a to install the tire scraper to the gauge

wheel arm.

If your gauge wheel does have the two mounting

holes, go to step 1b for instructions to bolt the

tire scraper to the gauge wheel arm.

1a. Installing to Light Gauge Wheel Arm without

Mounting Holes

Fit the locator mount (26) over the gauge wheel axle

bolt (2).

Align the edges of the locator mount with the edges

of the gauge wheel arm as shown.

Position the mount plate (23) on the locator mount as

shown.

68231

68234A

68235A

Nutri-Pro Tire Scraper

4Great Plains | 427-051M

Fire Hazard:

Welding can create sparks. Perform the work away from

flammable materials. Wear suitable protective equipment.

Allow hot parts to cool before continuing work.

Tack weld along the top of the mount plate to hold it

in position.

Remove the locator mount.

Weld (1/4inch fillet weld, about 1 1/2inch long) at two

places on the top of the mount plate and two places

on the bottom.

Clean off any slag and weld splatter. Allow the welds

to cool. Paint green.

If the tire scraper (12) is not installed to the tire

scraper mount (24), install the tire scraper (12) to the

shank mount (15) with two 7/16 -14 X 1 3/4inch plow

bolts (11) and nuts (20).

Install the scraper pivot (17) to the shank mount

plate (15) using two 1/2-13 x 1 1/2inch bolts (18), two

1/2inch washer locks (14), and two nuts (13).

Install the tire scraper (12) to the scraper pivot (17)

with four 1 1/2inch clamps (19) and lock nuts (16).

Install the tire scraper mount (15) to the mount plate

using two 1/2-13 x 1 1/4inch bolts (16), lock washers

(18), and nuts (17).

Install the tire scraper mount (24) into the mount

plate using two 1/2-13 X 1 1/4inch bolts (27), washer

locks (22), and nuts (21).

Adjust the tire scraper as needed.

Repeat the procedure for the other gauge wheel.

68236A

68238d

01/30/19 5

1b. Install to New Light Gauge Wheel Arm

If the tire scraper (12) is not installed to the tire

scraper mount (24), install the tire scraper (12) to the

shank mount (15) with two 7/16 -14 X 1 3/4inch plow

bolts (11) and nuts (20).

Install the scraper pivot (17) to the shank mount

plate (15) using two 1/2-13 x 1 1/2inch bolts (18), two

1/2inch washer locks (14), and two nuts (13).

Install the tire scraper (12) to the scraper pivot (17)

with four 1 1/2 inch clamps (19) and lock nuts (16).

Install the tire scraper mount (15) to the mount plate

using two 1/2-13 x 1 1/4inch bolts (16), lock washers

(18), and nuts (17).

Install the tire scraper mount (24) into the mount

plate using two 1/2-13 X 1 1/4inch bolts (27), washer

locks (22), and nuts (21).

Adjust the tire scraper as needed.

Repeat the procedure for the other gauge wheel.

68239d

Nutri-Pro Tire Scraper

6Great Plains | 427-051M

2 Medium Gauge Wheel

These instructions are for installing the tire scraper

to a medium gauge wheel.

If your gauge wheel does not have the two

mounting holes (1), follow the instructions at

step 2a to install the tire scraper to the gauge

wheel arm.

If your gauge wheel does have the two mounting

holes, go to step 2b for instructions to bolt the

tire scraper to the gauge wheel arm.

2a. Installing to Medium Gauge Wheel Arm

without Mounting Holes

Position the locator mount (25) over the axle lock

plate (2) and align the edges as shown.

Position the mount plate (23) on the locator mount as

shown.

Fire Hazard:

Welding can create sparks. Perform the work away from

flammable materials. Wear suitable protective equipment.

Allow hot parts to cool before continuing work.

Tack weld along the top of the mount plate to hold it

in position.

Remove the locator mount.

Weld (1/4inch fillet weld, about 1 1/2inch long) at two

places on the top of the mount plate and two places

on the bottom.

Clean off any slag and weld splatter. Allow the welds

to cool. Paint green.

68232

68234B

68235b

68236B

01/30/19 7

If the tire scraper (12) is not installed to the tire

scraper mount (24), install the tire scraper (12) to the

shank mount (15) with two 7/16 -14 X 1 3/4inch plow

bolts (11) and nuts (20).

Install the scraper pivot (17) to the shank mount

plate (15) using two 1/2-13 x 1 1/2inch bolts (18), two

1/2inch washer locks (14), and two nuts (13).

Install the tire scraper (12) to the scraper pivot (17)

with four 1 1/2 inch clamps (19) and lock nuts (16).

Install the tire scraper mount (15) to the mount plate

using two 1/2-13 x 1 1/4inch bolts (16), lock washers

(18), and nuts (17).

Install the tire scraper mount (24) into the mount

plate using two 1/2-13 X 1 1/4inch bolts (27), washer

locks (22), and nuts (21).

Adjust the tire scraper as needed.

Repeat the procedure for the other gauge wheel.

2b. Installing to New Medium Gauge Wheel Arm

If the tire scraper (12) is not installed to the tire

scraper mount (24), install the tire scraper (12) to the

shank mount (15) with two 7/16 -14 X 1 3/4inch plow

bolts (11) and nuts (20).

Install the scraper pivot (17) to the shank mount

plate (15) using two 1/2-13 x 1 1/2inch bolts (18), two

1/2inch washer locks (14), and two nuts (13).

Install the tire scraper (12) to the scraper pivot (17)

with four 1 1/2 inch clamps (19) and lock nuts (16).

Install the tire scraper mount (15) to the mount plate

using two 1/2-13 x 1 1/4inch bolts (16), lock washers

(18), and nuts (17).

Install the tire scraper mount (24) into the mount

plate using two 1/2-13 X 1 1/4inch bolts (27), washer

locks (22), and nuts (21).

Adjust the tire scraper as needed.

Repeat the procedure for the other gauge wheel.

68238e

68239e

12 15

Nutri-Pro Tire Scraper

8Great Plains | 427-051M

3 Heavy Gauge Wheel

These instructions are for installing the tire scraper

to a heavy gauge wheel.

If your gauge wheel does not have the two

mounting holes (1), follow the instructions at

step 3a to install the tire scraper to the gauge

wheel arm.

If your gauge wheel does have the two mounting

holes, go to step 3b for instructions to bolt the

tire scraper to the gauge wheel arm.

3a. Installing to Heavy Gauge Wheel Arm

without Mounting Holes

Position the locator mount (25) over the axle lock

plate (2) and align edges as shown.

Position the mount plate (23) on the locator mount as

shown.

Fire Hazard:

Welding can create sparks. Perform the work away from

flammable materials. Wear suitable protective equipment.

Allow hot parts to cool before continuing work.

Tack weld along the top of the mount plate to hold it

in position.

Remove the locator mount.

Weld (1/4inch fillet weld, about 1 1/2inch long) at two

places on the top of the mount plate and two places

on the bottom.

Clean off any slag and weld splatter. Allow the welds

to cool. Paint green.

68233

68234C

68235C

68236C

01/30/19 9

If the tire scraper (12) is not installed to the tire

scraper mount (24), install the tire scraper (12) to the

shank mount (15) with two 7/16 -14 X 1 3/4inch plow

bolts (11) and nuts (20).

Install the scraper pivot (17) to the shank mount

plate (15) using two 1/2-13 x 1 1/2inch bolts (18), two

1/2inch washer locks (14), and two nuts (13).

Install the tire scraper (12) to the scraper pivot (17)

with four 1 1/2 inch clamps (19) and lock nuts (16).

Install the tire scraper mount (15) to the mount plate

using two 1/2-13 x 1 1/4inch bolts (16), lock washers

(18), and nuts (17).

Install the tire scraper mount (24) into the mount

plate using two 1/2-13 X 1 1/4inch bolts (27), washer

locks (22), and nuts (21).

Adjust the tire scraper as needed.

Repeat the procedure for the other gauge wheel.

3b. Installing to New Heavy Gauge Wheel Arm

If the tire scraper (12) is not installed to the tire

scraper mount (24), install the tire scraper (12) to the

shank mount (15) with two 7/16 -14 X 1 3/4inch plow

bolts (11) and nuts (20).

Install the scraper pivot (17) to the shank mount

plate (15) using two 1/2-13 x 1 1/2inch bolts (18), two

1/2inch washer locks (14), and two nuts (13).

Install the tire scraper (12) to the scraper pivot (17)

with four 1 1/2 inch clamps (19) and lock nuts (16).

Install the tire scraper mount (15) to the mount plate

using two 1/2-13 x 1 1/4inch bolts (16), lock washers

(18), and nuts (17).

Install the tire scraper mount (24) into the mount

plate using two 1/2-13 X 1 1/4inch bolts (27), washer

locks (22), and nuts (21).

Adjust the tire scraper as needed.

Repeat the procedure for the other gauge wheel.

68238f

68239f

Nutri-Pro Tire Scraper

10 Great Plains | 427-051M

Torque Values Chart

946

25199m

Bolt

Size

Bolt Head Identiﬁcation

Bolt

Size

Bolt Head Identiﬁcation

Grade 2 Grade 5 Grade 8 Class 5.8 Class 8.8 Class 10.9

in-tpiaN-mbN-m N-m mm x pitchcN-m N-m N-m

1e4-20 7.4 11  M 5 X 0.8

1e4-28 8.5 13 18 M 6 X 1 71115

5e16-18 15 24 33 M 8 X 1.25 17 26 36

5e16-24 17 26 37 M 8 X 1 18 28 39

3e8-16 27 42 59 M10 X 1.5 33 52 72

3e8-24 31 47 67 M10 X 0.75 39 61 85

7e16-14 43 67 95 M12 X 1.75 58 91 125

7e16-20 49 75 105 M12 X 1.5 60 95 130

1e2-13 66 105 145 M12 X 1 90 105 145

1e2-20 75 115 165 M14 X 2 92 145 200

9e16-12 95 150 210 M14 X 1.5 99 155 215

9e16-18 105 165 235 M16 X 2 145 225 315

5e8-11 130 205 285 M16 X 1.5 155 240 335

5e8-18 150 230 325 M18 X 2.5 195 310 405

3e4-10 235 360 510 M18 X 1.5 220 350 485

3e4-16 260 405 570 M20 X 2.5 280 440 610

7e8-9 225 585 820 M20 X 1.5 310 650 900

7e8-14 250 640 905 M24 X 3 480 760 1050

1-8 340 875 1230 M24 X 2 525 830 1150

1-12 370 955 1350 M30 X 3.5 960 1510 2100

11e8-7 480 1080 1750 M30 X 2 1060 1680 2320

11e8-12 540 1210 1960 M36 X 3.5 1730 2650 3660

11e4-7 680 1520 2460 M36 X 2 1880 2960 4100

11e4-12 750 1680 2730

13e8-6 890 1990 3230 a. in-tpi = nominal thread diameter in inches-threads per inch

13e8-12 1010 2270 3680 b. N· m = newton-meters

11e2-6 1180 2640 4290

11e2-12 1330 2970 4820

c. mm x pitch = nominal thread diameter in mm x thread pitch

Torque tolerance + 0%, -15% of torquing values. Unless otherwise speciﬁed use torque values listed above.

5.8 8.8 10.9

25199

ft-lbdft-lb ft-lb ft-lb ft-lb ft-lb

5.6 8 12

61014 5 811

11 17 25 12 19 27

13 19 27 13 21 29

20 31 44 24 39 53

22 35 49 29 45 62

32 49 70 42 67 93

36 55 78 44 70 97

49 76 105 66 77 105

55 85 120 68 105 150

70 110 155 73 115 160

79 120 170 105 165 230

97 150 210 115 180 245

110 170 240 145 230 300

170 265 375 165 260 355

190 295 420 205 325 450

165 430 605 230 480 665

185 475 670 355 560 780

250 645 910 390 610 845

275 705 995 705 1120 1550

355 795 1290 785 1240 1710

395 890 1440 1270 1950 2700

500 1120 1820 1380 2190 3220

555 1240 2010

655 1470 2380

745 1670 2710

870 1950 3160

d. ft-lb = foot pounds

980 2190 3560

357

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere GREAT PLAINS Landwirtschaftliche Geräte Handbücher

GREAT PLAINS

GREAT PLAINS Qualidisc Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Turbo Max C2411H Plus Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 3P1006NT Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS MC5109 Max-Chisel Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS PL5500 PTO Handbuch

GREAT PLAINS

GREAT PLAINS RC2515 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS NTA607HD Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS CTA4000 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 1200 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Turbo Max 3500TM Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 2S-2600 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Nutri-Pro NP1330AA Leitfaden

GREAT PLAINS

GREAT PLAINS TCN5107 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Yield-Pro 3PYP Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS VT1520-0370 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 706NT Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS CPH Produkthandbuch

GREAT PLAINS

GREAT PLAINS PL5700 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Yield-Pro Air-Pro YP625PD Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 3S-5000 Series Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS PL5500-0830 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS LS10 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Terra Max HT1100-10 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Yield-Pro Air-Pro YP2425A Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung