GREAT PLAINS Yield-Pro 3P3025AH Bedienungsanleitung

Installation Instructions for Meter Hopper Seal

for the 1.6 bushel hopper and 3.0 bushel hopper

Before Getting Started

Before you begin installation of your Meter Hopper

Seal, read these instructions carefully and check that all

parts and tools in kit are accounted for. All hand and

specialty tools for installation are provided at owner’s

expense. Please retain these installation instructions for

future reference and parts ordering information.

These installation instructions contain information for

assembling the Meter Hopper Seal to the 1.6 bushel

and 3.0 bushel hoppers.

To view an online video version of these instructions

use the following link:

http://www.greatplainsag.com/en/10551/

installation-instructions-meter-hopper-seal

General Information

The Meter Hopper Seal kit adds a seal and gasket for a

better fit of the hopper to the seed meter.

Refer to page 3 for a detailed list of parts included in

these kits. Use this list to inventory parts received.

Tools Required

General hand tools are required for installation:

Refer to page 6 for torque values chart.

Models Covered

Kit Description Reference Number

Meter Hopper Seal 403-787K

3P3025AH 3-Point 30 Foot Stack-Fold Yield-Pro®

Planter

YP425A 4-Row Yield-Pro® Planter

YP625A 6-Row Yield-Pro® Planter

YP825A 8-Row Yield-Pro® Planter

YP625TD 3-Point 6-Row 110 cm Yield-Pro® Planter

YP925TD 3-Point 9-Row 65 cm Yield-Pro® Planter

1625IRHD 2-Section 25 Series Yield-Pro® Planter

with Individual Row Control

YP825AR 8-Row Rotating Yield-Pro® Planter

3P4025AH 3-Point 40 Foot Stack-Fold Yield-Pro®

Planter

1625AHD 2-Section 25 Series Yield-Pro® Planter

with Dry Fertilizer

1625AHL 2-Section 25 Series Yield-Pro® Planter

with Liquid Fertilizer

YP425A3P 3-Point 4-Row Yield-Pro® Planter

YP625A3P 3-Point 6-Row Yield-Pro® Planter

YP825A3P 3-Point 8-Row Yield-Pro® Planter

YP1025A3P 3-Point 10-Row Yield-Pro® Planter

2 Meter Hopper Seal Great Plains Manufacturing, Inc.

403-788M 09/26/16

Recommended Manuals

All manuals related to this kit are available free of charge

by visiting www.greatplainsag.com. Have machine model

and serial numbers available when looking for the

manual you need.

Using This Manual

This manual was written to help you install and prepare

your new kit. The manual includes instructions for

installation and setup. Read this manual and follow the

recommendations for safe, efficient, and proper

assembly and setup.

Read and understand “Important Safety Information” and

“Operating Instructions” in the operator’s manual before

installing your new kit. As a reference, keep the

operator’s manual on hand while installing.

The information in this manual is current at printing.

Some parts may change to assure top performance.

Use this kit only in conjunction with a Great Plains

implement.

411-332M 3P3025AH Operator’s Manual

411-332P 3P3025AH Parts Manual

401-651M YP425A, YP625A, YP825A Operator’s

Manual

401-651P YP425A, YP625A, YP825A Parts Manual

401-755M YP625TD, YP925TD Operator’s Manual

401-755P YP625TD, YP925TD Parts Manual

411-240M 1625IRHD Operator’s Manual

411-240P 1625IRHD Parts Manual

401-923M YP825AR Operator’s Manual

401-923P YP825AR Parts Manual

411-099M 3P4025AH Operator’s Manual

411-099P 3P4025AH Parts Manual

411-020M 1625AHD, 1625AHL Operator’s Manual

411-020P 1625AHD, 1625AHL Parts Manual

401-652M YP425A3P, YP625A3P, YP825A3P,

YP1025A3P Operator’s Manual

401-652P YP425A3P, YP625A3P, YP825A3P,

YP1025A3P Parts Manual

Installation Guide QRC

The QR Code (Quick Response) to the

left will take you to a web installation

guide. Use your smart phone or tablet

to scan the QR Code with an

appropriate App to begin viewing.

Yield-Pro QRC

The QR Code (Quick Response) to the

left will take you to the Yield-Pro family

of manuals. Use your smart phone or

tablet to scan the QR Code with an

appropriate App to begin viewing.

Great Plains Manufacturing, Inc. 3

09/26/16 403-788M

Safety & Symbol Information

When you see this symbol, the subsequent

instructions and warnings are serious - follow

without exception. Your life and the lives of others

depend on it!

A crucial point of information related to the current topic.

Read and follow the directions to remain safe, avoid serious

damage to equipment and ensure desired field results.

Be Aware of Signal Words

The following signal words designate a degree or level of

hazard seriousness. Take the necessary precautions and

exercise sound judgment.

DANGER indicates an imminently hazardous situation which,

if not avoided, will result in death or serious injury. This signal

word is limited to the most extreme situations, typically for

machine components that, for functional purposes, cannot be

guarded.

WARNING indicates a potentially hazardous situation which,

if not avoided, could result in death or serious injury, and

includes hazards that are exposed when guards are removed. It

may also be used to alert against unsafe practices.

CAUTION indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury. It may

also be used to alert against unsafe practices.

Further Assistance

Great Plains Manufacturing, Inc. wants you to be

satisfied with your new meter hopper seal. If for any

reason you do not understand any part of this manual or

are otherwise dissatisfied with the product please

contact:

Great Plains Service Department

1525 E. North St.

P.O. Box 5060

Salina, KS 67402-5060

Or go to www.greatplainsag.com and follow the contact

information at the bottom of your screen for our service

department.

Kit Contents

Right-hand and left-hand as used in this

manual are determined by facing the

direction the machine will travel. An

orientation rose in some line art

illustrations shows the directions of: Up,

Back, Left, Down, Front, Right.

Part Number Part Description Qty.

837-160C SEAL INSERT HOPPER

LG OVAL BTM

891-738C GASKET ORING 1/8

RND X 3.5 ID

4 Meter Hopper Seal Great Plains Manufacturing, Inc.

403-788M 09/26/16

Installation Instructions

Before you begin installation of your meter hopper seal

kit, lower the planter on a solid, clean surface. Detach

implement from the tractor.

Refer to Figure 1

1. Beginning at one end of the machine, remove the

four 5/16-18 x 3/4 inch bolts (1), flat washers (2), and

flange nuts (3) to remove the hopper from hopper

mount (4).

Figure 1

Remove Hopper

38927

Great Plains Manufacturing, Inc. Installation Instructions 5

09/26/16 403-788M

Refer to Figure 2

2. Turn the hopper upside down so it is resting on the

lid.

3. Push the plastic insert (5) into the hopper outlet with

the flared lip of the insert toward the hopper lid.

4. Place the o-ring gasket (6) around the plastic insert

and work it down into the hopper with a thin blade.

It is important to carefully work down the o-ring gasket and

plastic insert as far as possible so the hopper will fit correctly

on the seed meter.

Refer to Figure 3

5. Put the hopper back onto the seed meter. The seed

chute (7) will fit between the plastic insert and the

hopper outlet.

Figure 2

Install Seal

38928

Figure 3

Assemble Hopper to Seed Meter

38929

6 Meter Hopper Seal Great Plains Manufacturing, Inc.

403-788M 09/26/16

Refer to Figure 4

6. Make sure the holes on the hopper line up with the

holes on the hopper mount.

If the holes do not line up, remove the hopper and

trim the seed chute about 1/8inch to 1/4inch.

7. Install the four 5/16-18 x 3/4 inch bolts (1), flat

washers (2), and flange nuts (3) to a torque of

60 in-lb or 5 ft-lb.

8. Repeat the procedure for each hopper.

Figure 4

Fasten Hopper to Mount

38930

Great Plains, Mfg.

1525 E. North St.

P.O. Box 5060

Salina, KS 67402

Andere Handbücher für Yield-Pro 3P3025AH

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere GREAT PLAINS Landwirtschaftliche Geräte Handbücher

GREAT PLAINS

GREAT PLAINS PH-15 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS CTA4000 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Yield-Pro PL5800 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 3P1006NT Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS NTA3010 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Short Disk SD2600 Leitfaden

GREAT PLAINS

GREAT PLAINS BD7600 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS HT1100-35 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS YP925TD Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS YP4025A Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 3P1006NT-1575 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 1007NT Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS NTA907HD Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 1510HDP Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 606NT Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS VT1500 Series Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS YP4425A Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Turbo Max 3500TM Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS CT8300 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 1510P Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Turbo Max 1200TM Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS MC5109 Max-Chisel Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 706NT Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS VT1510 Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung