Greenlee CMT-80 Bedienungsanleitung

CMT-80

Clamp-on Meter

Medidor

con pinza

Contrôleur

numérique

à pinces

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

Read and understand all of the instructions and safety

information in this manual before operating or servicing

thistool.

Lea y entienda todas las instrucciones y la información

sobre seguridad que aparecen en este manual, antes de

manejar estas herramientas o darles mantenimiento.

Lire attentivement et bien comprendre toutes les

instructions et les informations sur la sécurité de ce manuel

avant d’utiliser ou de procéder à l’entretien de cet outil.

en www.greenlee.com / Enregistrez votre produit en ligne, www.greenlee.com

Description

The Greenlee CMT-80 Digital Clamp-on Meter is a hand-held testing device with the

following measurement capabilities: AC and DC voltage, AC current, and resistance.

It also tests diodes and veriﬁes continuity.

This unit automatically determines measurement function based on input. It has a

smart data hold feature with audible and visual alert if the input changes signiﬁcantly

while the unit is in HOLD mode. The unit automatically enters HOLD mode when the

jaw is removed from a conductor while measuring AC current. It performs a self-test

and displays approximate remaining battery capacity during the power-up sequence.

The Automatic Power Off feature can be disabled if desired.

Safety

Safety is essential in the use and maintenance of Greenlee tools and equipment. This

instruction manual and any markings on the tool provide information for avoiding

hazards and unsafe practices related to the use of this tool. Observe all of the safety

information provided.

Purpose of This Manual

This instruction manual is intended to familiarize all personnel with the safe opera-

tion and maintenance procedures for the Greenlee CMT-80 Digital Clamp-on Meter.

Keep this manual available to all personnel.

Replacement manuals are available upon request at no charge

at www.greenlee.com.

Lifetime Limited Warranty

Greenlee Textron Inc. warrants to the original purchaser of these goods for use

that these products will be free from defects in workmanship and material for their

useful life, excepting normal wear and abuse. This warranty is subject to the same

terms and conditions contained in Greenlee Textron Inc.’s standard one-year limited

warranty.

For all Test Instrument repairs, contact Customer Service at 800-435-0786 and

request a Return Authorization.

For items not covered under warranty (such as items dropped, abused, etc.), a repair

cost quote is available upon request.

Note: Prior to returning any test instrument, please check replaceable batteries or

make sure the battery is at full charge.

CMT-80

Important Safety Information

KEEP THIS MANUAL

All speciﬁcations are nominal and may change as design improvements occur.

Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of

its products.

® Registered: The color green for electrical test instruments is a registered trademark of

Greenlee Textron Inc.

Do not discard this product or throw away!

For recycling information, go to www.greenlee.com.

SAFETY ALERT SYMBOL

This symbol is used to call your attention to hazards or unsafe practices which

could result in an injury or property damage. The signal word, deﬁned below,

indicates the severity of the hazard. The message after the signal word provides

information for preventing or avoiding the hazard.

Immediate hazards which, if not avoided, WILL result in severe injury or death.

Hazards which, if not avoided, COULD result in severe injury or death.

Hazards or unsafe practices which, if not avoided, MAY result in injury or

property damage.

Read and understand this material before operating or

servicing this equipment. Failure to understand how to safely

operate this tool could result in an accident causing serious

injury or death.

Important Safety Information

Electric shock hazard:

Contact with live circuits could result in severe injury or death.

Electric shock and ﬁre hazard:

•Do not expose this unit to rain or moisture.

•Do not use the unit if it is wet or damaged.

•Use test leads or accessories that are appropriate for the application. Refer to

the category and voltage rating of the test lead or accessory.

•Inspect the test leads or accessory before use. They must be clean and dry, and

the insulation must be in good condition.

•Use this unit for the manufacturer’s intended purpose only, as described in this

manual. Any other use can impair the protection provided by the unit.

Failure to observe these warnings could result in severe injury or death.

Electric shock hazard:

•Do not apply more than the rated voltage between any two input terminals, or

between any input terminal and earth ground.

•Do not contact the test lead tips or any uninsulated portion of the accessory.

Failure to observe these warnings could result in severe injury or death.

CMT-80

Important Safety Information

Electric shock hazard:

•Do not operate with the case or battery cover open.

•Before removing the case or battery cover, remove the test leads (or jaw) from

the circuit and shut off the unit.

Failure to observe these warnings could result in severe injury or death.

Electric shock hazard:

•Unless measuring voltage or current, shut off and lock out power. Make sure that

all capacitors are discharged. Voltage must not be present.

•Using this unit near equipment that generates electromagnetic interference can

result in unstable or inaccurate readings.

Failure to observe these warnings could result in severe injury or death.

Electric shock hazard:

•Do not attempt to repair this unit. It contains no user-serviceable parts.

•Do not expose the unit to extremes in temperature or high humidity.

Refer to “Speciﬁcations.”

•Do not connect to voltage for longer than 30 seconds.

Failure to observe these precautions may result in injury and can damage the unit.

Electric shock hazard:

Do not use the meter to measure voltages in circuits that could be damaged or

actuated by the meter’s low input impedance (approximately 4 kΩ).

Failure to observe this precaution may result in injury and can damage the unit.

Identiﬁcation

1. Jaw

2. Lever

3. Display

4. Common (COM) input terminal

5. Volts or resistance (V-Ω) input terminal

6. ON/OFF/HOLD button

Display Icons

7. Low battery indicator

8. –Polarity indicator

9. Measured voltage is greater than

30 volts AC or DC

10. AutoSense Automatic selection is active

11. Automatic Power Off is enabled

12. AutoHold Hold function is enabled

13. LoZi Low input impedance is active

14. AC AC measurement is selected

15. Continuity

16. DC DC measurement is selected

17. Diode

18. AAmperes

19. VVoltage

20. %Percent

21. kKilo (103)

22. ΩOhms

23. OL Overload indicator

Symbols on the Unit

Warning—Read the instruction manual

Electric shock hazard

Application around and removal from hazardous live conductors is permitted.

Double insulation

Battery

Recycle product in accordance with manufacturer’s directions

Note: Icons that

appear on the display

but are not identiﬁed

are not used on this

model. 7

10-11 12-14

15-16

17-19

20-22

4 5

CMT-80

Using the Features

•ON/OFF/HOLD: Momentarily press the ON/OFF/HOLD button to hold the present

measurement on the display; momentarily press again to return to the normal

display mode. Press and hold to turn the unit on or off.

•Smart Hold: The hold feature is disabled when “OL” is displayed on the LCD. The

LCD will blink and the beeper will sound if the unit is in HOLD mode and the input

increases by 5.0 volts or 5.0 amps. It will also blink and ﬂash if the unit is in HOLD

mode and detects an input type change, such as from AC volts to AC amps.

•Auto Hold (AC amps only): The unit automatically holds a stable AC current

measurement that is 3 amps or more. The unit beeps three times to indicate it has

saved the stable value. This value will be displayed for 5 seconds after the unit

is removed from the conductor. The value can be recalled by pressing the HOLD

button. To enable this feature, press and hold the ON/OFF/HOLD button until the

“AutoHold” icon blinks when turning the unit on, approximately 5 seconds.

•Battery Capacity Display: The unit displays the percentage of remaining battery

capacity when it is powering up. Replace the battery when “0%” is shown.

•Power-on Self-test: The unit automatically tests its internal circuitry after it

displays battery capacity. If a problem is found, the LCD will display “FAIL”. Do not

use the meter if “FAIL” is shown on the LCD.

Note: Do not measure while powering up as this could cause an incorrect self-test

failure.

•Automatic Power Off: To extend battery life, the unit will shut itself off after

approximately 20 minutes of inactivity. To disable this feature, press and hold

the ON/OFF/HOLD button until the “APO” icon blinks when turning the unit on,

approximately 3 seconds.

Operation

Electric shock hazard:

Contact with live circuits could result in severe injury or death.

1. The meter automatically selects the proper measurement according to the

following table.

Priority Display Conditions

1AC volts or DC volts,

whichever is greater

Input at terminals is

1.3 to 600.0 VAC

2.1 to 600.0 VDC

-0.7 to -600.0 VDC

2Resistance and

continuity

Input at terminals is

0 to ∞ Ω

0 to 0.9 VAC

1.0 to 2.0 VDC

-0.2 to -0.4 VDC

3 Diode test Input at terminals is

0.4 to 0.8 VDC

4 AC amps AC current through jaw is

0.9 to 400.0 A

2. Refer to “Typical Measurements” for speciﬁc measurement instructions.

3. Test the unit on a known functioning circuit or component of the type you intend

to measure.

•If the unit does not function as expected on a known functioning circuit,

replace the battery.

•If the unit still does not function as expected, send the unit to Greenlee for

repair. Refer to the instructions under the Warranty.

4. Take the reading from the circuit or component to be tested.

CMT-80

Typical Measurements

Current Measurement—

Clamp Around Wire

Notes:

•Clamp the jaw around one conductor only.

•Close the jaw completely to ensure accurate

measurement.

•Center the wire in the jaw for highest accuracy.

Current Measurement—

Clamp Around Line Splitter

Notes:

•The Greenlee 93-30 Line Splitter is divided. One

section renders amps; the other renders amps

multiplied by 10.

•Close the jaw completely to ensure accurate

measurement.

•Center the line splitter in the jaw for highest

accuracy.

Typical Measurements

Voltage Measurement

Resistance Measurement

Andere Handbücher für CMT-80

Inhaltsverzeichnis

Sprachen:

Andere Greenlee Messgerät Handbücher

Greenlee

Greenlee AM-600T Bedienungsanleitung

Greenlee

Greenlee CMT-90 Bedienungsanleitung

Greenlee

Greenlee AirScout Gigacheck Bedienungsanleitung

Greenlee

Greenlee 5990A Bedienungsanleitung

Greenlee

Greenlee IPM-300 Bedienungsanleitung

Greenlee

Greenlee FC-110 Bedienungsanleitung

Greenlee

Greenlee BLL-200 Bedienungsanleitung

Greenlee

Greenlee 200B-G Bedienungsanleitung

Greenlee

Greenlee ANM-50 Bedienungsanleitung

Greenlee

Greenlee CM-1360 Bedienungsanleitung

Greenlee

Greenlee CS-8000 Circuit Seeker Bedienungsanleitung

Greenlee

Greenlee THM-250 Bedienungsanleitung

Greenlee

Greenlee 93-172 Bedienungsanleitung

Greenlee

Greenlee 200EP-G Bedienungsanleitung

Greenlee

Greenlee 200EP-G Bedienungsanleitung

Greenlee

Greenlee 5883 Bedienungsanleitung

Greenlee

Greenlee CM-1360 Bedienungsanleitung

Greenlee

Greenlee TS90 TelScout Bedienungsanleitung

Greenlee

Greenlee 560XL Bedienungsanleitung

Greenlee

Greenlee 200fp Bedienungsanleitung

Greenlee

Greenlee 5990 Bedienungsanleitung

Greenlee

Greenlee TM-400 Bedienungsanleitung

Greenlee

Greenlee 93-172 Bedienungsanleitung

Greenlee

Greenlee Pull Connect Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung