Grizzly T32732 Bedienungsanleitung

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 10/21) #CS22103 PRINTED IN TAIWAN

Introduction

The Model T32732 Bench Grinder Sharpening

System replaces the light-duty tool rests on your

6"–8" bench grinder and provides an easily adjust-

able platform for sharpening chisels, gouges, and

other woodworking tools.

Inventory

Figure 1. Model T32732 installed for use with

bench grinder.

V1.10.21

To reduce your risk of

serious injury, read this

entire manual BEFORE

using machine.

NOTICE

If you cannot find an item on this list, care-

fully check around/inside the machine and

packaging materials. Often, these items get

lost in packaging materials while unpack-

ing or they are pre-installed at the factory.

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T32732

BENCH GRINDER

SHARPENING SYSTEM

INSTRUCTIONS

Table Size ..................................................3" x 6"

T-Slot Size ......................................................5⁄16"

Weight .........................................................6 lbs.

Specifications

Description Qty

A. Short Arm Assembly .................................. 1

B. Long Arm Assembly ................................... 1

C. Table ........................................................... 1

D. Adjustable Handle 5⁄16"-18 x 11⁄2" ................. 1

E. Flat Washer 5⁄16" ......................................... 1

F. Wood Screws 1⁄4" x 11⁄4" .............................. 6

Figure 2. Inventory.

DEF

-2- Model T32732 (Mfd. Since 10/21)

Assembly

The Model T32732 must be assembled and

mounted around your bench grinder. Both the

grinder and the sharpening system should be

placed as close as possible to the workbench

edge so arms can be adjusted correctly.

Wear safety glasses during

the entire setup process!

To assemble sharpening system:

1. Measure from workbench surface to center

of grinding wheels on bench grinder (see

Figure 3).

Spacer Block

6¼"

— If distance is at least 61⁄4", no adjustment

is required.

Figure 3. Example of distance to measure

(wheel guard removed for clarity).

Figure 4. Illustration of spacer block used to

increase distance.

— If distance is less than 61⁄4", mount your

bench grinder on top of a spacer block to

increase distance to 61⁄4" (see Figure 4).

Note: If mounting on spacer block, any

rubber machine feet on grinder should be

removed from machine base and re-installed

under spacer block.

Items Needed Qty

Measuring Tape ................................................. 1

Wooden Spacer Block ....................... As Needed

Machinist's Square ............................................ 1

Cordless Drill ..................................................... 1

Phillips Head Bit #2 ........................................... 1

2. Remove (1) cap screw from each arm (see

Figure 5) in order to remove arms from

bases.

x 2

Base

(1 of 2)

Long Arm

Short Arm

Figure 5. Location of cap screws in arms.

Model T32732 (Mfd. Since 10/21) -3-

3. Align front of (1) base with front of left grind-

ing wheel (see Figure 6).

Note: Handles should face away from grinder

(see Figure 6).

6. Mount each base to workbench using (3)

1⁄4" x 11⁄4" wood screws (see Figure 8).

Figure 8. Mounting base to workbench with

wood screws.

Eye and face injuries and respiratory prob-

lems can occur while operating this tool.

Wear personal protective equipment to

reduce your risk from these hazards.

Keep hair, clothing, and

jewelry away from mov-

ing parts at all times.

Entanglement can result

in death, amputation, or

severe crushing injuries!

Sharpening Using Long Arm

The long arm can be installed in either base to

provide a place to rest the handle of woodturning

tools. The V-holder allows you to rotate or pivot

the tool against the grinding wheel, which is useful

when sharpening gouges and skew chisels.

4. While keeping base aligned with wheel front,

adjust base so arm hole aligns with center of

left wheel (see Figure 7).

Figure 6. Aligning base with front of wheel.

Base

Front of

Grinding Wheel

Handle

Arm Hole

Center of

Wheel

Base

Figure 7. Aligning base with center of wheel.

Tool Needed Qty

Hex Wrench 3mm .............................................. 1

Wood Screw

Base

5. Repeat Steps 3–4 with remaining base and

right grinding wheel.

IMPORTANT: Front edge of each base

should be within 1⁄2" of workbench front edge.

If bases are not within 1⁄2", move grinder and

bases forward while maintaining adjustments

from previous steps.

-4- Model T32732 (Mfd. Since 10/21)

3. Place woodturning tool handle in V-holder at

front of long arm (see Figure 10).

4. Adjust long arm until entire bevel of tool

contacts grinding wheel, then secure posi-

tion by pulling base handles forward (see

Figure 10).

Figure 10. Example of woodturning tool

supported by long arm.

V-Holder

Woodturning

Tool

Base Handles

5. Tilt tool away from grinding wheel, connect

grinder to power, and turn machine ON.

6. Use firm grip to return tool to surface of grind-

ing wheel to perform grinding operation.

Note: See Sharpening Gouges and

Sharpening Chisels on Page 6 for more

information on tool sharpening techniques.

Eye and face injuries and respiratory prob-

lems can occur while operating this tool.

Wear personal protective equipment to

reduce your risk from these hazards.

Keep hair, clothing, and

jewelry away from mov-

ing parts at all times.

Entanglement can result

in death, amputation, or

severe crushing injuries!

Sharpening Using Short Arm

The short arm can be installed in either base

to attach the adjustable table included with the

sharpening system. Rest the shaft of a woodwork-

ing tool on the table and pivot or rotate the tool

against the grinding wheel during the operation.

Tool Needed Qty

Hex Wrench 3mm .............................................. 1

Figure 9. Example of long arm inserted into

base.

Long Arm

Base

Arm Hole

To sharpen using long arm:

1. DISCONNECT GRINDER FROM POWER!

2. Insert long arm into desired base arm hole,

then install cap screw removed from long arm

during assembly to secure (see Figure 9).

Model T32732 (Mfd. Since 10/21) -5-

To sharpen using short arm:

1. DISCONNECT GRINDER FROM POWER!

2. Insert short arm into desired base arm hole,

then install cap screw from short arm during

assembly to secure (see Figure 11).

Figure 11. Example of short arm inserted into

base.

Short Arm Base

Arm Hole

3. Install table on short arm with 5⁄16"-18 x 11⁄2"

adjustable handle and 5⁄16" flat washer (see

Figure 12).

Table

Figure 12. Example of table installed on short

arm.

4. Place woodworking tool shaft against table

and grinding wheel (see Figure 13).

5. Loosen adjustable handle and adjust table

until entire bevel of tool contacts grinding

wheel, then secure table by tightening adjust-

able handle (see Figure 13).

6. Adjust short arm until there is less than 1⁄16" of

clearance between table and grinding wheel,

then secure position by pulling base handles

forward (see Figure 14).

Note: Table angle and height may need to be

readjusted after table clearance is adjusted.

Figure 14. Short arm adjusted so there is less

than 1⁄16" clearance between table and grinding

wheel.

7. Tilt tool away from grinding wheel, connect

grinder to power, and turn machine ON.

8. Use firm grip to return tool to surface of grind-

ing wheel to perform grinding operation.

Note: See Sharpening Gouges and

Sharpening Chisels on Page 6 for more

information on tool sharpening techniques.

Table

Base Handles

Grinding

Wheel

Figure 13. Example of table adjusted so

woodworking tool bevel contacts grinding wheel.

Table

Adjustable

Handle

Woodworking

Tool

-6- Model T32732 (Mfd. Since 10/21)

To sharpen a gouge, pivot or rotate the tool

against the grinding wheel to follow its curves to

each outer corner. A gouge typically has a solid

bevel on the bottom, a fluted bevel on the top, and

wings extending back towards the handle (see

Figure 15).

Sharpening Gouges

Figure 16. Typical gouge grinds.

We recommend researching these different gouge

grinds further to determine which will work best for

your project and for detailed instructions on how

to sharpen the various edges and angles.

Sharpening Chisels

For the straight edges of a chisel, move it from

side to side across the grinding wheel to sharpen

the first bevel, then turn the tool over and grind

the opposite side for the second bevel (see

Figure 17).

40°

50°

55°

65-70°

40°

45°

Gouge Profile

Traditional

40/40

Fingernail

Irish, Swept

Back,

Ellsworth

Micro-Bevel

40°

50°

55°

65-70°

40°

45°

40°

50°

55°

65-70°

40°

45°

40°

50°

55°

65-70°

40°

45°

40°

50°

55°

65-70°

40°

45°

Bear in mind that changing the angles of any of

these facets, or rolling a gouge past one of its

corners, will have an effect on the overall profile

or "grind" of the gouge (see the chart in Figure 16

for some typical gouge grinds).

Wings

Solid Bevel

Fluted Bevel

Side View

Top View

Figure 15. Typical gouge components.

Top View

Side View

1st Bevel

2nd Bevel

1st Bevel

2nd Bevel

3rd Bevel

Figure 17. Typical chisel components.

These two bevels will be determined by the tool's

angle in relation to the surface of the grinding

wheel. However, a skew chisel has an additonal

bevel to keep in mind, as shown in Figure 18.

Top View

Side View

1st Bevel

2nd Bevel

1st Bevel

2nd Bevel

3rd Bevel

Figure 18. Typical skew chisel components.

Grinding Wheel

Skew Chisel

Skew Angle

This third bevel prevents you from feeding a tool

into the grinding wheel straight-on, as viewed

from above (see Figure 19), so be sure to con-

sider all three bevels, and the best way to support

them, before feeding your tool.

Figure 19. Skew chisel as viewed from above.

Model T32732 (Mfd. Since 10/21) -7-

order online at www.grizzly.com or call 1-800-523-4777

Accessories

Installing unapproved accessories may

cause machine to malfunction, resulting in

serious personal injury or machine damage.

To reduce this risk, only install accessories

recommended for this machine by Grizzly.

NOTICE

Refer to our website or latest catalog for

additional recommended accessories.

T32733—Skew Grinding Attachment

The T32733 Skew Grinding Attachment securely

positions your skews in the V-holders at offset

angles for precision sharpening. The left and right

V-holders are adjustable to maintain bevels at

exact skew angles.

Figure 20. Model T32733 Skew Grinding

Attachment for T32732.

T32734—Gouge Grinding Attachment

The T32734 Gouge Grinding Attachment secures

your spindle gouges, bowl gouges, and roughing

gouges at angles up to 40° for repeatable shap-

ing. The brass knob locks in your tool and doubles

as a thumb rest while rounding gouges. The jig

holds gouges up to 19⁄16" wide with shafts between

3⁄16"–13⁄8". Quickly grind fingernail profiles, side

grinds, and simple bevels.

Figure 21. Model T32734 Gouge Grinding

Attachment for T32732.

T32735—Angle Gauge

The T32735 Angle Gauge consistently produces

sharp, repeatable, and exact angles on wood-

working tools. The gauge slides into the table of

the T32732 Bench Grinder Sharpening System

and adjusts between 0°–24° left or right. Great for

sharpening skews, scrapers, cutters, and other

tools needing a specific angled edge.

Figure 22. Model T32735 Angle Guide for

T32732.

-8- Model T32732 (Mfd. Since 10/21)

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

T32732 Parts Breakdown & List

Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here

are available for purchase. Call (800) 523-4777 or visit our online parts store at www.grizzly.com to check for availability.

22 23

10 11

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 PT32732001 BASE 41 X 80 X 205 13 PT32732013 CAP SCREW M5-.8 X 8

2 PT32732002 STOP ROD 10 X 17.7 14 PT32732014 SHORT ARM 307MM

3 PT32732003 COMPRESSION SPRING 1.2 X 13.4 X 16.5 15 PT32732015 ARM CAP 20 X 20

4 PT32732004 CONICAL FLAT WASHER 8.5 X 13.5 X 2MM 16 PT32732016 CAP SCREW M4-.7 X 5

5 PT32732005 BUTTON HD CAP SCR M4-. 7 X 12 17 PT32732017 TABLE MOUNTING BRACKET

6 PT32732006 HANDLE MOUNTI NG BLOCK 18 PT32732018 TABLE 3" X 6" X 1/2"

7 PT32732007 HANDLE ROD 15 X 50 (LH) 19 PT32732019 FLAT HD CAP SCR M5-.8 X 14

8 PT32732008 BUTTON HD CAP SCR M3-. 5 X 20 20 PT32732020 FLAT WASHER 5/16

9 PT32732009 EXT RETAINI NG RI NG 10MM 21 PT32732021 ADJ HANDLE 5/16-18 X 1-1/2, 2-1/2L

10 PT32732010 HOLLOW HANDLE 3/4 X 2, 5/16 22 PT32732022 WOOD SCREW 1/4 X 1-1/4

11 PT32732011 SHOULDER SCREW 5/16-18 X 1-1/8, 1-9/16 23 PT32732023 HANDLE ROD 15 X 50 (RH)

12 PT32732012 HEX NUT 5/16-18 24 PT32732024 LONG ARM 700MM

Andere Grizzly Schleifer Handbücher

Grizzly

Grizzly G0897 Bedienungsanleitung

Grizzly

Grizzly G8183 Bedienungsanleitung

Grizzly

Grizzly G8601 Bedienungsanleitung

Grizzly

Grizzly G1062 Bedienungsanleitung

Grizzly

Grizzly G5343 Bedienungsanleitung

Grizzly

Grizzly Grinding Jig G4570 Bedienungsanleitung

Grizzly

Grizzly G0688 Bedienungsanleitung

Grizzly

Grizzly H7762 Kurzanleitung

Grizzly

Grizzly G0596-99 Bedienungsanleitung

Grizzly

Grizzly H6193 Bedienungsanleitung

Grizzly

Grizzly T32002 Bedienungsanleitung

Grizzly

Grizzly G1090 Bedienungsanleitung

Grizzly

Grizzly G2790 Bedienungsanleitung

Grizzly

Grizzly G3622 Bedienungsanleitung

Grizzly

Grizzly H7757 Bedienungsanleitung

Grizzly

Grizzly G5963 Bedienungsanleitung

Grizzly

Grizzly H7762 Bedienungsanleitung

Grizzly

Grizzly t10493 Bedienungsanleitung

Grizzly

Grizzly G3155 Bedienungsanleitung

Grizzly

Grizzly G8220 Bedienungsanleitung

Grizzly

Grizzly H6155 Bedienungsanleitung

Grizzly

Grizzly H8211 Bedienungsanleitung

Grizzly

Grizzly G5963 Bedienungsanleitung

Grizzly

Grizzly G9717 Bedienungsanleitung

Beliebte Schleifer Handbücher anderer Marken

Parkside

Parkside PWS 230 C3 Bedienungsanleitung

SUHNER ABRASIVE

SUHNER ABRASIVE ASC 9 Technisches Handbuch

PTA

PTA P1322 Bedienungsanleitung

Crown

Crown CT13313 Bedienungsanleitung

Parkside

Parkside 280250 Bedienungsanleitung

Climax

Climax VM2150 Series Bedienungsanleitung

Jet

Jet JPSG-618M1 Service-Handbuch

Makita

Makita GA4030 Bedienungsanleitung

DeWalt

DeWalt DWEN202 Bedienungsanleitung

Fein

Fein MSf843-1a Bedienungsanleitung

Bosch

Bosch GWS 14,4 V PROFESSIONAL Bedienungsanleitung

RAMSET

RAMSET CBAGR18 Bedienungsanleitung

Bosch

Bosch 8-115 Z Bedienungsanleitung

STEELE PRODUCTS

STEELE PRODUCTS SP-PB008 Bedienungsanleitung

MW TOOLS

MW TOOLS ME15W Bedienungsanleitung

Caravaggi

Caravaggi SP 20 Betriebsanleitung

SUHNER ABRASIVE

SUHNER ABRASIVE UWK 10-R125 Technisches Handbuch

Metabo

Metabo WEF 9-125 Quick Bedienungsanleitung