Grizzly T32794 Bedienungsanleitung

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T32794

UNIVERSAL SHARPENING JIG FOR

T32720 WET GRINDER

INSTRUCTIONS

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 07/21) #CS21968 PRINTED IN CHINA

Introduction

The Model T32794 Universal Sharpening Jig pro-

vides support for tool sharpening on the Model

T32720 10" Wet Grinder.

Description Qty

A. Jig ............................................................... 1

B. Knob Bolts M6-1 x 22 ................................. 2

Inventory

Figure 1. Example of Model T32794 in use.

V1.07.21

To reduce your risk of

serious injury, read this

entire manual BEFORE

using machine.

NOTICE

If you cannot find an item on this list, care-

fully check around/inside the machine and

packaging materials. Often, these items get

lost in packaging materials while unpack-

ing or they are pre-installed at the factory.

Figure 2. Inventory.

-2- Model T32794 (Mfd. Since 07/21)

Using Jig

Attach the jig to the tool rest on your Model

T32720 10" Wet Grinder to sharpen chisels and

other tools.

To use jig:

1. DISCONNECT GRINDER FROM POWER!

2. Install tool rest (refer to Grinding Wheel

Rotation on Page 23 of Model T32720 own-

er's manual to determine best way to install

tool rest for your operation).

3. Slide jig onto tool rest and install (2) M6-1 x

22 knob bolts (see Figure 3).

Note: Leave knob bolts loose enough to

move jig until directed to tighten in Step 5.

4. Adjust tool rest closer to or further from grind-

ing wheel and tilt jig until desired grinding

angle is achieved.

5. Tighten knob bolts to secure jig position on

tool rest.

6. Connect grinder to power, and turn machine

ON.

7. Rest workpiece against jig (see Figure 3),

then use firm grip to guide it against surface

of grinding wheel to perform operation. Move

workpiece back and forth across surface of

wheel while grinding to prevent excessive or

uneven wheel wear.

Figure 3. Example of grinding chisel with jig.

Eye and face injuries and respiratory prob-

lems can occur while operating this tool.

Wear personal protective equipment to

reduce your risk from these hazards.

Keep hair, clothing, and

jewelry away from mov-

ing parts at all times.

Entanglement can result

in death, amputation, or

severe crushing injuries!

Jig

x 2

Tool Rest

Andere Grizzly Drehbank Handbücher

Grizzly

Grizzly H2669 Bedienungsanleitung

Grizzly

Grizzly G0768Z Bedienungsanleitung

Grizzly

Grizzly T10096 Bedienungsanleitung

Grizzly

Grizzly G0733 Bedienungsanleitung

Grizzly

Grizzly G4003G Bedienungsanleitung

Grizzly

Grizzly T10809 Bedienungsanleitung

Grizzly

Grizzly G0733 Bedienungsanleitung

Grizzly

Grizzly G0838 Bedienungsanleitung

Grizzly

Grizzly G0773 Bedienungsanleitung

Grizzly

Grizzly T32536 Bedienungsanleitung

Grizzly

Grizzly G4002 Bedienungsanleitung

Grizzly

Grizzly G4031 Benutzerhandbuch

Grizzly

Grizzly G0516 Bedienungsanleitung

Grizzly

Grizzly G4002 Bedienungsanleitung

Grizzly

Grizzly G0625 Bedienungsanleitung

Grizzly

Grizzly G0602 Bedienungsanleitung

Grizzly

Grizzly G9972Z Bedienungsanleitung

Grizzly

Grizzly G0632 Bedienungsanleitung

Grizzly

Grizzly G0462 Montage- und Bedienungsanleitung

Grizzly

Grizzly G1067Z Bedienungsanleitung

Grizzly

Grizzly G9972Z Bedienungsanleitung

Grizzly

Grizzly G4791 Bedienungsanleitung

Grizzly

Grizzly G0657 Bedienungsanleitung

Grizzly

Grizzly G9249 Bedienungsanleitung

Beliebte Drehbank Handbücher anderer Marken

Kval

Kval 990-H Bedienungsanleitung

Holzmann

Holzmann VD 1100ECO Bedienungsanleitung

HAMAR LASER

HAMAR LASER L-700 Beilage

Promac

Promac 941VA Bedienungsanleitung

Teknatool

Teknatool Nova Mercury Bedienungsanleitung

Traub

Traub TNL12.2 Bedienungsanleitung

WoodFast

WoodFast M305 Bedienungsanleitung

Milltronics

Milltronics ML Series Handbuch

Milltronics

Milltronics SL6 Series Handbuch

OmniTurn

OmniTurn GT-75 Bedienungsanleitung

Axminster

Axminster CQ6230A-2/910 Bedienungsanleitung

Jet

Jet JWL-1640EVS Service-Handbuch

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN ED1000FB Bedienungsanleitung

Hercus

Hercus 260 Bedienungsanleitung

Optimum

Optimum OPTIturn TM 3310 Bedienungsanleitung

HARVEY

HARVEY T-60S Bedienungsanleitung

Promac

Promac GH-1440K-T Bedienungsanleitung

Rottler

Rottler VR10 Bedienungsanleitung