Grizzly H3114 Bedienungsanleitung

ROUTER TABLE

MODEL H3114

INSTRUCTION MANUAL

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

PRINTED IN CHINA

ONLINE MANUAL DISCLAIMER

THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE AS IT IS CURRENTLY BEING SHIPPED. THE

MACHINE CONFIGURATION CAN CHANGE AS PRODUCT IMPROVEMENTS ARE INCORPORATED. IF YOU OWN AN EARLIER VERSION OF

THE MACHINE, THIS MANUAL MAY NOT EXACTLY DEPICT YOUR MACHINE . CONTACT CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS

ABOUT DIFFERENCES. PREVIOUS VERSIONS ARE NOT AVAILABLE ONLINE.

WARNING

Some dust created by power sanding, sawing, grinding,

drilling, and other construction activities contains chemi-

cals known to the State of California to cause cancer, birth

defects or other reproductive harm. Some examples of

these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks, cement, and other

masonry products.

• Arsenic and chromium from chemically treated

lumber.

Your risk from these exposures varies, depending on how

often you do this type of work. To reduce your exposure to

these chemicals: work in a well ventilated area, and work

with approved safety equipment, such as those dust

masks that are specially designed to filter out microscopic

particles.

TABLE OF CONTENTS PAGE

1. SAFETY ......................................................................................................................................................2

SAFETY INSTRUCTIONS FOR POWER TOOLS............................................................................2-3

ADDITIONAL SAFETY INSTRUCTIONS FOR ROUTER TABLES ....................................................4

2. INTRODUCTION ........................................................................................................................................5

COMMENTARY....................................................................................................................................5

3. CIRCUIT REQUIREMENTS ........................................................................................................................6

GENERAL ............................................................................................................................................6

ELECTRICAL ......................................................................................................................................6

4. SET UP........................................................................................................................................................7

MAIN FEATURES ................................................................................................................................7

ASSEMBLY ....................................................................................................................................8-13

OPERATION ................................................................................................................................14-16

5. REFERENCE INFO ..................................................................................................................................17

PARTS BREAKDOWNS AND LIST ..................................................................................................................18-19

WARRANTY AND RETURNS ..........................................................................................................................22-24

-2- H3114 Router Table

SECTION 1: SAFETY

For Your Own Safety Read Instruction

Manual Before Operating This Equipment

Indicates an imminently hazardous situation which, if not avoided,

WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided,

COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided,

MAY result in minor or moderate injury, or MAY cause property

damage.

This symbol is used to alert the user to useful information about

proper operation of the equipment.

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This

manual uses a series of symbols and signal words which are intended to convey the level of

importance of the safety messages. The progression of symbols is described below. Remember

that safety messages by themselves do not eliminate danger and are not a substitute for proper

accident prevention measures.

NOTICE

Safety Instructions For Power Tools

5. KEEP CHILDREN AND VISITORS

AWAY. All children and visitors should be

kept at a safe distance from work area.

6. MAKE WORKSHOP CHILD PROOF with

padlocks, master switches, or by removing

starter keys.

7. DO NOT FORCE TOOL. It will do the job

better and safer at the rate for which it was

designed.

8. USE RIGHT TOOL. Do not force tool or

attachment to do a job for which it was not

designed.

1. KEEP GUARDS IN PLACE and in working

order.

2. REMOVE ADJUSTING KEYS AND

WRENCHES. Form habit of checking to

see that keys and adjusting wrenches are

removed from tool before turning on.

3. KEEP WORK AREA CLEAN. Cluttered

areas and benches invite accidents.

4. DO NOT USE IN DANGEROUS ENVI-

RONMENT. Do not use power tools in

damp or wet locations, or where any flam-

mable or noxious fumes may exist. Keep

work area well lighted.

H3114 Router Table -3-

9. USE PROPER EXTENSION CORD. Make

sure your extension cord is in good condi-

tion. Conductor size must be in accor-

dance with the chart below. The amperage

rating is listed on the motor or tool name-

plate. An undersized cord will cause a drop

in line voltage resulting in loss of power

and overheating. Your extension cord

must also contain a ground wire and plug

pin. Always repair or replace damaged

extension cords.

Minimum Gauge for Extension Cords

10. WEAR PROPER APPAREL. Do not wear

loose clothing, gloves, neckties, rings,

bracelets, or other jewelry which may get

caught in moving parts. Non-slip footwear

is recommended. Wear protective hair

covering to contain long hair.

11. ALWAYS USE ANSI-APPROVED SAFE-

TY GLASSES. Also use face or dust mask

if cutting operation is dusty. Everyday eye-

glasses only have impact resistant lenses,

they are NOT safety glasses.

12. SECURE WORK. Use clamps or a vise to

hold work when practical. It is safer than

using your hand and frees both hands to

operate tool.

13. NEVER OVERREACH. Keep proper foot-

ing and balance at all times.

LENGTH

AMP RATING 25ft 50ft 100ft

0-6 18 16 16

7-10 18 16 14

11-12 16 16 14

13-16 14 12 12

17-20 12 12 10

21-30 10 10 No

Safety Instructions For Power Tools

14. MAINTAIN TOOLS WITH CARE. Keep

tools sharp and clean for best and safest

performance. Follow instructions for lubri-

cating and changing accessories.

15. DISCONNECT TOOLS before servicing

and changing accessories, such as blades,

bits, cutters, and any other item.

16. REDUCE THE RISK OF UNINTENTIONAL

STARTING. Make sure switch is in off posi-

tion before plugging in. Also, the magnetic

switch on this machine may start if the

switch gets bumped hard enough.

17. USE RECOMMENDED ACCESSORIES.

Consult the owner’s manual for recom-

mended accessories. The use of improper

accessories may cause risk of injury.

18. CHECK DAMAGED PARTS. Before further

use of the tool, a guard or other part that is

damaged should be carefully checked to

determine that it will operate properly and

perform its intended function. Check for

alignment of moving parts, binding of mov-

ing parts, breakage of parts, mounting, and

any other conditions that may affect its

operation. A guard or other part that is dam-

aged must be properly repaired or

replaced.

19. NEVER LEAVE TOOL RUNNING UNAT-

TENDED. TURN POWER OFF. Do not

leave tool until it comes to a complete stop.

20. NEVER USE UNDER THE INFLUENCE of

alcohol or drugs, or when tired.

21. IF AT ANY TIME YOU ARE EXPERIENC-

ING DIFFICULTIES performing the intend-

ed operation, stop using the machine! Then

contact our service department or ask a

qualified expert how the operation should

be performed.

-4- H3114 Router Table

1. HAND POSITIONING. Never pass your

hands directly over, or in front of the cutter. As

one hand approaches cutter, move it in an arc

motion away from the cutter to the outfeed

side and reposition that hand beyond the cut-

ter.

2. STOCK LENGTH. Do not shape stock short-

er than 12 inches without special fixtures or

jigs. Where practical, shape longer stock and

cut to size.

3. BLIND CUT WHENEVER POSSIBLE. This

keeps the cutters on the underside of the

workpiece and provides a distance guard for

the operator.

4. TEST ROTATION. Always rotate the spindle

by hand, with the machine unplugged, to test

any new setup to ensure proper cutter clear-

ance before starting the machine.

5. KEEP ANY UNUSED PORTION OF THE

CUTTER BELOW THE TABLE SURFACE.

6. DEPTH OF CUT. Never remove too much

material in one pass. Several light passes are

safer and give a cleaner finish.

7. SAFETY DEVICES. The use of push sticks

as safety devices in some applications is

smart; in others it can be quite dangerous. If

the push stick comes in contact with the cut-

ter on the end grain, it can fly out of your hand

like a bullet—potentially causing serious

injury.

We recommend using some type of fixture,

jig, or hold-down device as a safer alterna-

tive. Use a guard or other type of protective

device at all times.

8. ALWAYS FEED AGAINST THE ROTA-

TION OF THE CUTTER.

9. DO NOT REMOVE THE RETRACTABLE

GUARD ON THE FENCE.

10. IF AT ANYTIME YOU ARE EXPERIENC-

ING DIFFICULTIES PERFORMING THE

INTENDED OPERATION, STOP USING

THE ROUTER TABLE! Then contact our

service department or ask a qualified expert

how the operation should be performed.

11. BE AWARE THAT CERTAIN WOODS

MAY CAUSE AN ALLERGIC REACTION

in people and animals, especially when

exposed to fine dust. Make sure you know

what type of wood dust you will be exposed

to, the possibility of a allergic reaction and

always wear an approved respirator.

12. NEVER REACH BEHIND THE SPINNING

CUTTER.

13. READ AND UNDERSTAND THE

INSTRUCTION MANUAL SUPPLIED

WITH THE ROUTER INSTALLED IN THIS

TABLE

14. DO NOT REACH UNDER THE ROUTER

TABLE WHILE THE ROUTER IS

PLUGGED IN OR RUNNING.

Additional Safety Instructions For Router Tables

H3114 Router Table -5-

SECTION 2: INTRODUCTION

We are proud to offer the Grizzly Model H3114

Router Table. The Model H3114 is part of a grow-

ing Grizzly family of fine woodworking machinery.

When used according to the guidelines set forth

in this manual, you can expect years of trouble-

free, enjoyable operation and proof of Grizzly’s

commitment to customer satisfaction.

Features include:

•Over 440 square inches of work surface

•Master power switch controls a router and

another accessory such as a shop vac

•Universal clamping system allows the mount-

ing of most brands of routers

•Heavy-duty fence system with dust port

•Pocket jointing fence allows router table to

function as a jointer

•Miter gauge

•Various table inserts

•Convenient fence scales allow for precise

adjustment

•Retractable safety guard

•Heavy-duty cast aluminum table

Grizzly is also pleased to provide this manual

with the Model H3114. It was written to guide you

through assembly, review safety considerations,

and cover general operating procedures. If you

have any comments regarding this manual,

please write to us at the address below:

Grizzly Industrial, Inc.

C/O Technical Documentation

P.O. Box 2069

Bellingham, WA 98227-2069

Commentary Most importantly, we stand behind our machines.

If you have any service questions or parts

requests, please call or write us at the location

listed below:

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: [email protected]

Web Site: http://www.grizzly.com

The specifications, drawings, and photographs

illustrated in this manual represent the Model

H3114 as supplied when the manual was pre-

pared. However, owing to Grizzly’s policy of con-

tinuous improvement, changes may be made at

any time with no obligation on the part of Grizzly.

Current Grizzly machine manuals can be viewed

and printed at: www.grizzly.com.

Lack of familiarity with

this manual could

cause serious person-

al injury. Become

familiar with the con-

tents of this manual,

including all the safety

warnings.

-6- H3114 Router Table

SECTION 3: CIRCUIT REQUIREMENTS

General Electrical

The power switch (Page 7, Figure 2) on the

Model H3114 is designed to work with most

routers and other electrical accessories. The

power switch provides the convenience of switch-

ing power to the router and accessories at the

front of the router table instead of having to reach

under the table and locate multiple switches. The

power switch also allows multiple devices such as

lights or vacuums to be powered on when the

router is powered on.

The Model H3114 power switch is designed to

accept 2-prong DOUBLE INSULATED plugs or 3-

prong grounding type plugs. The power switch

plugs into a wall outlet that is properly grounded

as shown in Figure 1.

If the machine is wired incorrectly a fire

could result. Make sure your wiring, recep-

tacle, plug, and circuit breaker can handle

the current draw of the machine. If you are

not sure that your electrical circuit can han-

dle the current draw, get a qualified electri-

cian to test your electrical system and do

any required upgrades. Do not attempt to

modify an existing circuit by only replacing

the circuit breaker with one rated for a high-

er amperage draw than the wiring, recepta-

cle, and plug are rated for.

Figure 1. Power switch 3-prong plug and

grounding style outlet.

Grounding Prong

Current Carrying Prongs

Grounded Outlet

H3114 Router Table -7-

Main Features

SECTION 4: SET UP

Set up and operation instructions will be easier to understand if you become familiar with the location and

names of the basic features shown in Figure 2.

Figure 2. Machine features.

Extension Table

Power Switch

Note–Only 1 of the 5 table inserts are shown.

Leg

Main Table

Miter Gauge

Main Fence

Dust Port

Table Insert

Retractable

Guard

Pocket

Jointing

Fence

-8- H3114 Router Table

Assembly

Figure 3. Aligning an extension table

with the main table.

To attach the extension tables and legs to the

main table:

1. Place the main table upside down on a work-

bench.

2. Align the extension tables mounting holes

with the mounting holes on the edge of the

main table (Figure 3). Note—DO NOT

secure the extension tables with screws at

this time.

Loose hair and clothing

could get caught in

machinery causing seri-

ous personal injury.

Keep loose clothing

rolled up and long hair

tied up and away from

machinery.

Projectiles thrown from

the machine could cause

serious eye injury. Wear

safety glasses during

assembly.

Disconnect power to the

machine during the

entire assembly process.

Failure to do this may

result in serious person-

al injury.

Sharp edges on metal

parts may cause person-

al injury. Examine the

edges of all metal parts

before handling.

Main Table

Extension Table

Inhaltsverzeichnis

Andere Grizzly Werkzeugaufbewahrung Handbücher

Grizzly

Grizzly Tool Storage Bedienungsanleitung

Grizzly

Grizzly H7728 Bedienungsanleitung

Grizzly

Grizzly G8586 Bedienungsanleitung

Grizzly

Grizzly T1251 Bedienungsanleitung

Grizzly

Grizzly T28170 Bedienungsanleitung

Grizzly

Grizzly H8110 Bedienungsanleitung

Grizzly

Grizzly T25091 Bedienungsanleitung

Grizzly

Grizzly G0631 Bedienungsanleitung

Grizzly

Grizzly Panther T10001 Bedienungsanleitung

Grizzly

Grizzly T10157 Bedienungsanleitung

Grizzly

Grizzly Panther T10002 Bedienungsanleitung

Grizzly

Grizzly G0631 Kurzanleitung

Grizzly

Grizzly T10115 Bedienungsanleitung

Grizzly

Grizzly CLAMP RACK Bedienungsanleitung

Grizzly

Grizzly H7507 Bedienungsanleitung

Grizzly

Grizzly T28780 Bedienungsanleitung

Grizzly

Grizzly G0854 Bedienungsanleitung

Grizzly

Grizzly T27946 Bedienungsanleitung

Grizzly

Grizzly Oak Workbench T10157 Bedienungsanleitung

Grizzly

Grizzly H7507 Kurzanleitung

Grizzly

Grizzly Benchtop Downdraft Table T10115 Bedienungsanleitung

Grizzly

Grizzly G0528 Bedienungsanleitung

Grizzly

Grizzly G0528 Bedienungsanleitung

Grizzly

Grizzly T25251 Bedienungsanleitung

Beliebte Werkzeugaufbewahrung Handbücher anderer Marken

Ryobi

Ryobi RWB03 Bedienungsanleitung

Husky

Husky H27CH5TR4BGK Bedienungsanleitung

Scheppach

Scheppach ts 2100 Bedienungsanleitung

Cornwell Tools

Cornwell Tools CTB360AKBK Bedienungsanleitung

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Bedienungsanleitung

Cassese

Cassese CS200 CART Bedienungsanleitung

Kendall Howard

Kendall Howard ESDW-9630-1000 Bedienungsanleitung

Lista

Lista Align Montageanleitung

Workzone

Workzone 99609 Bedienungsanleitung

Stanley

Stanley STST83800-1 Bedienungsanleitung

Homak

Homak PROFESSIONAL Series Systemhandbuch

Perel

Perel ROLLER SHUTTER STORAGE CABINET Bedienungsanleitung

Husky

Husky H5CH2R Bedienungsanleitung

BGS technic

BGS technic 4107 Bedienungsanleitung

Clarke

Clarke CWB1250 Bedienungsanleitung

Ryobi

Ryobi RWB02 Bedienungsanleitung

Husky

Husky H52CH6HDV3WHT Bedienungsanleitung

Sealey

Sealey PTB66004 Bedienungsanleitung