Grizzly T1250 Bedienungsanleitung

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#CS22213 PRINTED IN CHINA

Revised Inventory List

The following change was recently made since the owner's manual was printed:

• Workbench now comes with (8) hex bolts and a wrench to attach end frames, center frame, and upper

supports to workbench top. There will be (8) M8-1.25 x 55 button head cap screws not used during

assembly.

Aside from this information, all other content in the owner's manual applies and MUST be read and under-

stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.

For questions or help, contact our Tech Support at (570) 546-9663 or [email protected].

READ THIS FIRST

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

Model T1250

***IMPORTANT UPDATE***

For Machines Mfd. Since 12/21

and Owner's Manual Printed 11/17

Additional Items (Figure 1) Qty

I. Hex Bolts 5⁄16"-18 x 2" ................................. 8

J. Open-End Wrench 12mm ........................... 1

Figure 1. Additional inventory items.

9V2

9V2 9V2

1V2

Revised Parts

REF PART # DESCRIPTION

1V2 PT1250001V2 WORKBENCH TOP 25 X 96 X 1-3/4 V2.12.21

9V2 PT1250009V2 HEX BOLT 5/16-18 X 2 V2.12.21

16 PT1250016 WRENCH 12MM OPEN-END

-2- Model T1250 (Mfd. Since 12/21)

(Replaces Page 2 in Manual)

Assembly 4. Secure end frames and upper supports with

(4) external corner braces and (4) internal

corner braces, using (12) M8-1.25 x 55 but-

ton head cap screws, (24) 8mm flat washers,

and (12) M8-1.25 lock nuts (see Figure 4).

DO NOT fully tighten fasteners yet.

1. Lay workbench top upside-down on a pro-

tected surface, such as cardboard or a

blanket.

Note: Bottom-side of workbench top has

threaded holes.

2. Attach both end frames and center

frame to workbench top with (4) 5⁄16"-18

x 2" hex bolts and (4) 8mm flat wash-

ers (see Figure 2). DO NOT fully tighten

fasteners yet.

3. Attach each upper support to workbench top

with (4) 5⁄16"-18 x 2" hex bolts and (4) 8mm flat

washers (see Figure 3). DO NOT fully tighten

fasteners yet.

5. Secure center frame and upper supports

with (1) support brace and (4) internal corner

braces, using (8) M8-1.25 x 55 button head

cap screws, (16) 8mm flat washers, and

(6) M8-1.25 lock nuts (see Figure 5).

DO NOT fully tighten fasteners yet.

Figure 2. End frame and center frame attached

to workbench top.

x 2

End Frame

Center

Frame

End of

Workbench Top

Figure 5. Center frame and upper supports

secured together with braces.

x 8

Upper Frame

Support

Center

Frame

Support

Brace

Internal

Corner

Brace

Figure 4. End frame and upper support secured

together with corner braces.

x 12

End Frame

Upper

Support

Figure 3. Upper support attached to workbench

top.

x 4 Upper

Support

Side of

Workbench

Top

External

Corner Brace

Internal

Corner

Brace

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T1250

25" X 96" HEAVY-DUTY

BEECH WORKBENCH

INSTRUCTIONS

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 11/17) #ES19301 PRINTED IN CHINA

Introduction

This workbench is designed to be used with

chairs or stools and double as a desk, making it

ideal for close-in detail work, such as soldering,

assembly work, gunsmithing, etc. Featuring a

solid beechwood top, all-steel frame construction,

and re-inforced corners—rock-solid and built to

last a lifetime.

V1.11.17

Inventory

Specifications

• Workbench Top (Width x Length) ...25" x 96"

• Footprint (Width x length) ............... 20" x 91"

• Height ...................................................... 37"

• Maximum Weight Capacity ......... 2500+ lbs.

• Approximate Assembly Time .......45 Minutes

Needed for Assembly

• Additional Person ....................................... 1

Figure 1. Model T1250 25" x 96" Heavy-Duty

Beech Workbench.

Description Qty

A. Workbench Top ......................................... 1

B. Center Frame ............................................. 1

C. End Frames ................................................ 2

D. Upper Supports .......................................... 4

E. Lower Supports .......................................... 2

F. Rubber Feet M10-1.5 x 35 .......................... 6

G. Hardware Bag ..............................................

— Support Brace ......................................... 1

— External Corners ..................................... 6

— Internal Corners .................................... 12

—Button Hd Cap Screws M8-1.25 x 55 ... 38

— Flat Washers 8mm ................................ 68

— Lock Nuts M8-1.25 ................................ 30

—Wrench 13/14mm Open-Ends ................. 1

— Hex Wrench 5mm ................................... 1

H. Steel Bars 5⁄8" x 113⁄4" ............................... 12

Figure 2. Inventory.

-2- Model T1250 (Mfd. Since 10/17)

Assembly 4. Secure end frames and upper supports with

(4) external corners and (4) internal corners,

using (12) M8-1.25 x 55 button head cap

screws, (24) 8mm flat washers, and (12)

M8-1.25 lock nuts (see Figure 5). DO NOT

fully tighten fasteners yet.

1. Lay workbench top upside-down on a pro-

tected surface, such as cardboard or a

blanket.

Note: Bottom-side of workbench top has

threaded holes.

2. Attach both end frames and center frame to

workbench top with (4) M8-1.25 x 55 button

head cap screws and (4) 8mm flat wash-

ers (see Figure 3). DO NOT fully tighten

fasteners yet.

3. Attach each upper support to work-

bench top with (4) M8-1.25 x 55 button

head cap screws and (4) 8mm flat wash-

ers (see Figure 4). DO NOT fully tighten

fasteners yet.

5. Secure center frame and upper supports

with (1) support brace and (4) internal cor-

ners, using (8) M8-1.25 x 55 button head

cap screws, (16) 8mm flat washers, and (6)

M8-1.25 lock nuts (see Figure 6). DO NOT

fully tighten fasteners yet.

Figure 3. End frame and center frame attached

to workbench top.

x 2

End Frame

Center

Frame

End of

Workbench Top

Figure 6. Center frame and upper supports

secured together with brace and corners.

x 8

Upper Frame

Support

Center

Frame

Support

Brace

Internal

Corner

Figure 4. Upper support attached to workbench

top.

x 4

Upper

Support

Figure 5. End frame and upper support secured

together with corners.

x 12

End Frame

Internal

Corner

External Corner

Upper

Support

Side of

Workbench

Top

Model T1250 (Mfd. Since 10/17) -3-

6. Secure end frames, center frame, and

lower supports with (2) external corners and

(4) internal corners, using (10) M8-1.25 x 55

button head cap screws, (20) 8mm flat wash-

ers, and (10) M8-1.25 lock nuts (see Figure 7).

DO NOT fully tighten fasteners yet.

7. Thread (6) rubber feet into bottoms of frames

(see Figure 8).

Figure 9. Steel bars inserted.

Center

Frame End Frame

Steel Bars

Figure 7. End frame, center frame, and lower

supports secured together with corners.

Upper Frame

Support

x 6

End Frame

Center Frame

x 4

Internal

Corner

Internal

Corner

External

Corner

Figure 8. Rubber feet attached.

End Frame

Center

Frame

Rubber

Foot

8. Turn workbench upright and make sure it is

centered over end frames and supports (not

leaning to one side or the other), then fully

tighten all fasteners.

9. Adjust feet as necessary to ensure work-

bench sits firmly on ground and does not

rock.

Option: Lay a level across workbench from

side-to-side and end-to-end when adjusting

feet.

10. Insert steel bars through end support frames

as desired (see Figure 8).

Note:End frames have several

holes, allowing for numerous shelving and

racking configurations.

-4- Model T1250 (Mfd. Since 10/17)

Parts Breakdown & List

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 PT1250001 WORKBENCH TOP 25 X 96 X 1-3/4 9 PT1250009 BUTTON HD CAP SCR M8-1.25 X 55

2 PT1250002 END FRAME 10 PT1250010 FLAT WASHER 8MM

3 PT1250003 CENTER FRAME 11 PT1250011 LOCK NUT M8-1.25

4 PT1250004 UPPER SUPPORT 12 PT1250012 RUBBER FOOT M10-1.5 X 35

5 PT1250005 LOWER SUPPORT 13 PT1250013 STEEL BAR 5/8 X 11-3/4

6 PT1250006 SUPPORT BRACE 14 PT1250014 WRENCH 13/14MM OPEN-ENDS

7 PT1250007 EXTERNAL CORNER 15 PT1250015 HEX WRENCH 5MM

8 PT1250008 INTERNAL CORNER

811

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

Inhaltsverzeichnis

Andere Grizzly Werkzeugaufbewahrung Handbücher

Grizzly

Grizzly T1238 Bedienungsanleitung

Grizzly

Grizzly H8361 Bedienungsanleitung

Grizzly

Grizzly H3114 Bedienungsanleitung

Grizzly

Grizzly H7507 Bedienungsanleitung

Grizzly

Grizzly G0854 Bedienungsanleitung

Grizzly

Grizzly T25091 Bedienungsanleitung

Grizzly

Grizzly T28780 Bedienungsanleitung

Grizzly

Grizzly T1240 Bedienungsanleitung

Grizzly

Grizzly G0888 Bedienungsanleitung

Grizzly

Grizzly G8586 Bedienungsanleitung

Grizzly

Grizzly H6462 Bedienungsanleitung

Grizzly

Grizzly T33276 Bedienungsanleitung

Grizzly

Grizzly H7725 Bedienungsanleitung

Grizzly

Grizzly T27951 Bedienungsanleitung

Grizzly

Grizzly Benchtop Downdraft Table T10115 Bedienungsanleitung

Grizzly

Grizzly T28170 Bedienungsanleitung

Grizzly

Grizzly Tool Storage Bedienungsanleitung

Grizzly

Grizzly H7724 Bedienungsanleitung

Grizzly

Grizzly H7725 Bedienungsanleitung

Grizzly

Grizzly H7728 Bedienungsanleitung

Grizzly

Grizzly T27946 Bedienungsanleitung

Grizzly

Grizzly G0528 Bedienungsanleitung

Grizzly

Grizzly Panther T10001 Bedienungsanleitung

Grizzly

Grizzly Oak Workbench T10157 Bedienungsanleitung

Beliebte Werkzeugaufbewahrung Handbücher anderer Marken

Ryobi

Ryobi RWB03 Bedienungsanleitung

Husky

Husky H27CH5TR4BGK Bedienungsanleitung

Scheppach

Scheppach ts 2100 Bedienungsanleitung

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Bedienungsanleitung

Cassese

Cassese CS200 CART Bedienungsanleitung

Cornwell Tools

Cornwell Tools CTB360AKBK Bedienungsanleitung

Kendall Howard

Kendall Howard ESDW-9630-1000 Bedienungsanleitung

Lista

Lista Align Montageanleitung

Workzone

Workzone 99609 Bedienungsanleitung

Stanley

Stanley STST83800-1 Bedienungsanleitung

Homak

Homak PROFESSIONAL Series Systemhandbuch

Perel

Perel ROLLER SHUTTER STORAGE CABINET Bedienungsanleitung

Husky

Husky H5CH2R Bedienungsanleitung

BGS technic

BGS technic 4107 Bedienungsanleitung

Clarke

Clarke CWB1250 Bedienungsanleitung

Ryobi

Ryobi RWB02 Bedienungsanleitung

Husky

Husky H52CH6HDV3WHT Bedienungsanleitung

Sealey

Sealey PTB66004 Bedienungsanleitung