GSi PNEG-1724 Bedienungsanleitung

PNEG-1724

S2 Quick Start Guide Canister

Installation Manual

PNEG-1724

Date: 07-21-10

2PNEG-1724 S2 Quick Start Guide Canister

Table of Contents

PNEG-1724 S2 Quick Start Guide Canister 3

Contents

Chapter 1 Safety .....................................................................................................................................................4

Safety Guidelines .................................................................................................................................. 4

Safety Instructions ................................................................................................................................. 5

Operator Qualifications ......................................................................................................................... 9

Chapter 2 General Information ...........................................................................................................................10

Chapter 3 Installation ..........................................................................................................................................11

Chapter 4 Parts List .............................................................................................................................................14

Components ........................................................................................................................................ 14

Chapter 5 Warranty ..............................................................................................................................................15

4PNEG-1724 S2 Quick Start Guide Canister

1. Safety

Safety Guidelines

This manual contains information that is important for you, the owner/operator, to know and understand.

This information relates to protecting personal safety and preventing equipment problems. It is the

responsibility of the owner/operator to inform anyone operating or working in the area of this equipment of

these safety guidelines. To help you recognize this information, we use the symbols that are defined

below. Please read the manual and pay attention to these sections. Failure to read this manual and its

safety instructions is a misuse of the equipment and may lead to serious injury or death.

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety

messages that follow this symbol to avoid possible

injury or death.

WARNING indicates a potentially hazardous situation

which, if not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which,

if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a

potentially hazardous situation which, if not avoided, may

result in property damage.

NOTE indicates information about the equipment that you

should pay special attention.

DANGER indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

1. Safety

PNEG-1724 S2 Quick Start Guide Canister 5

Safety Instructions

Our foremost concern is your safety and the safety of others associated with this equipment. We want to

keep you as a customer. This manual is to help you understand safe operating procedures and some

problems which may be encountered by the operator and other personnel.

As owner and/or operator, it is your responsibility to know what requirements, hazards and precautions

exist, and to inform all personnel associated with the equipment or in the area. Safety precautions may be

required from the personnel. Avoid any alterations to the equipment. Such alterations may produce a very

dangerous situation where SERIOUS INJURY or DEATH may occur.

This equipment shall be installed in accordance with the current installation codes and applicable

regulations which should be carefully followed in all cases. Authorities having jurisdiction should be

consulted before installations are made.

Follow Safety Instructions

Carefully read all safety messages in this manual and

safety signs on your machine. Keep signs in good

condition. Replace missing or damaged safety signs. Be

sure new equipment components and repair parts include

the current safety signs. Replacement safety signs are

available from the manufacturer.

Learn how to operate the machine and how to use controls

properly. Do not let anyone operate without instruction.

Keep your machinery in proper working condition.

Unauthorized modifications to the machine may impair

the function and/or safety and affect machine life.

If you do not understand any part of this manual or need

assistance, contact your dealer.

Read and Understand Manual

Rotating Flight

Grain augers can kill or dismember.

Keep clear of all augers and never enter the bin unless all

power is disconnected and locked out. Failure to do so will

result in serious injury or death.

RotatingFlight

1. Safety

6PNEG-1724 S2 Quick Start Guide Canister

Install and Operate Electrical Equipment Properly

Electrical controls should be installed by a qualified electrician

and must meet the standards set by the National Electrical Code

and all local and state codes.

Disconnect and lock out all power sources before installing

wires/cables or servicing equipment.

ELECTRICAL WARNINGS

A. Install and ground the slip ring and the entire unit in accordance with the National Electric Code

and local codes and/or ordinances.

B. DANGER:Hazardofelectricalshockor burn.Always disconnect thepowerfromthecollectorring

before attempting to perform any service function. Follow lock out/tag outprocedures as outlined

in O.S.H.A., section 1910.147 where appropriate.

C. Do not use this slip ring with electrical loads greater than the rated current and voltage.

D. Information regarding the current and voltage rating of each slip ring is recorded on a tag

permanently fastened to the ring assembly.

E. 1 R-Series Slip Rings withstand a maximum ambient temperature of 220°F.

F. The model number of the slip ring assembly indicates the ampacity and voltage rating of each

type of ring and brush included on the assembly. NOTE: The actual ampacity may be affected

by the type and size of the core lead wire (refer to NEC Table 310-16, 17, 18, 19 and

applicable notes).

Electric Shock Hazard

Prepare for Emergencies

Be prepared if fire starts.

Keep a first aid kit and fire extinguisher handy.

Keep emergency numbers for doctors, ambulance service,

hospital and fire department near your telephone. Keep Emergency Equipment

Quickly Accessible

1. Safety

PNEG-1724 S2 Quick Start Guide Canister 7

Wear Protective Clothing

Wear close fitting clothing and safety equipment appropriate

to the job.

Remove all jewelry.

Long hair should be tied up and back.

Safety glasses should be worn at all times to protect eyes

from debris.

Wear gloves to protect your hands from sharp edges on

plastic or steel parts.

Wear steel toe boots to help protect your feet from falling

debris. Tuck in any loose or dangling shoe strings.

A respirator may be needed to prevent breathing potentially

toxic fumes and dust.

Wear hard hat to help protect your head.

Wear appropriate fall protection equipment when working at

elevations greater than six feet (6').

Eye Protection

Gloves

Steel Toe Boots

Respirator

Hard Hat

Fall Protection

1. Safety

8PNEG-1724 S2 Quick Start Guide Canister

Operate Unload Equipment Properly

• Untrained operators subject themselves and others to SERIOUS INJURY

or DEATH. NEVER allow untrained personnel to operate this equipment.

• NEVER work alone.

• Keep children and other unqualified personnel out of the working

area at ALL times. Refer to the Start-Up section of this manual for

diagrams of the work area.

• Make sure ALL equipment is locked in position before operating.

• NEVER start equipment until ALL persons are clear of the work area.

• Keep hands and feet away from the auger intake and other moving parts.

• NEVER attempt to assist machinery operation or to remove trash from equipment while

in operation.

• Be sure all operators are adequately rested and prepared to perform all functions of operating

this equipment.

• NEVER allow any person intoxicated or under the influence of alcohol or drugs to operate

the equipment.

• Make sure someone is nearby who is aware of the proper shut down sequence in the event of an

accident or emergency.

• ALWAYS think before acting. NEVER act impulsively around the equipment.

• NEVER allow anyone inside a bin, truck or wagon which is being unloaded by an auger or

conveyor. Flowing grain can trap and suffocate in seconds.

• Use ample overhead lighting after sunset to light the work area.

• Keep area around intake free of obstacles such as electrical cords, blocks, etc., that might

trip workers.

• NEVER drive, stand or walk under the equipment.

• Use caution not to hit the auger when positioning the load.

• ALWAYS lock out ALL power to the equipment when finished unloading a bin.

• Be aware of pinch points. A pinch point is a narrow area between two surfaces that is likely to trap

or catch objects and so is a potential safety hazard.

Operate Unload

Equipment Safely

1. Safety

PNEG-1724 S2 Quick Start Guide Canister 9

Operator Qualifications

A. The User/Operator must be competent and experienced to operate auger equipment. Anyone who

works with or around augers must have good common sense in order to be qualified. These persons

must also know and meet all other qualifications, such as:

i. Any person who has not read and/or does not understand all operation and safety procedures

is not qualified to operate any auger systems.

ii. Certain regulations apply to personnel operating power machinery. Personnel under the age of

18 years may not operate power machinery, including augers. It is your responsibility, as owner

and/or supervisor, to know what these regulations are in your area or situation.

iii. Unqualified or incompetent persons are to remain out of the work area.

iv. O.S.H.A. (Occupational Safety and Health Administration) regulations state: “At the time of

initial assignment and at least annually thereafter, the employer shall instruct every employee

in the safe operation and servicing of all equipment with which the employee is, or will be

involved”. (Federal Occupational Safety and Health Standards for Agriculture. Subpart D,

Section 1928.57 (a) (6)).

B. As a requirement of O.S.H.A., it is necessary for the employer to train the employee in the safe

operating and safety procedures for this auger. The sign-off sheet is provided for your convenience

and personal record keeping. All unqualified persons are to stay out of the work area at all times. It

is strongly recommended that another qualified person who knows the shut down procedure is in the

area in the event of an emergency.

Date Employee Name Supervisor Name

10 PNEG-1724 S2 Quick Start Guide Canister

2. General Information

NEVER enter a grain bin unless ALL power driven equipment has been shut down.

Disconnect and lock out power before entering the bin or servicing the equipment.

ALWAYS keep ALL guards and shields in place, until all the power is disconnected

and locked out.

Inhaltsverzeichnis

Andere GSi Landwirtschaftliche Geräte Handbücher

GSi

GSi 40 Series Gebrauchsanweisung

GSi

GSi Cumberland Hi-Lo Bedienungsanleitung

GSi

GSi AIRSTREAM Bedienungsanleitung

GSi

GSi Vision Watchdog Bedienungsanleitung

GSi

GSi PNEG-1276 Bedienungsanleitung

GSi

GSi Design III Series Bedienungsanleitung

GSi

GSi Cumberland PNEG-1333 Montageanleitung

GSi

GSi 40 Series Bedienungsanleitung

GSi

GSi Bulk Feed Tank Series Bedienungsanleitung

GSi

GSi BFT Anchor Point Bedienungsanleitung

GSi

GSi FFI SCR Bedienungsanleitung

GSi

GSi TopDry Gebrauchsanweisung

GSi

GSi TopDry TD-101164 Bedienungsanleitung

GSi

GSi 30' BINS Bedienungsanleitung

GSi

GSi 2000 Series Bedienungsanleitung

GSi

GSi GrainVue Bedienungsanleitung

GSi

GSi TopDry Autoflow Gebrauchsanweisung

GSi

GSi GRA Bedienungsanleitung

GSi

GSi BFT Series Bedienungsanleitung

GSi

GSi 40 Series Gebrauchsanweisung

GSi

GSi PNEG-4093 Gebrauchsanweisung

GSi

GSi COMPETITOR 2000 Series Bedienungsanleitung

GSi

GSi 40 Series Bedienungsanleitung

GSi

GSi 40 Series Gebrauchsanweisung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung

TURF TANK

TURF TANK One+ Bedienungsanleitung