2
Work Positioning: This harness may be
used in Work Positioning applications.
Work Positioning systems allow a worker
to be supported while in suspension and work
freely with both hands. Structure must withstand
loads applied in the directions permitted by the
system of at least 3,000 lb (13 kN). Maximum
permitted free fall is 2 ft (0,6 m).
RESCUE/CONFINED SPACE:
This harness may be used in Rescue/
Confined Space applications. Rescue
systems function to safely recover a worker from
a confined location or after exposed to a fall. There
are various configurations of Rescue systems
depending on the type of rescue. Structure must
withstand loads applied in the directions permitted
by the system of at least 3,000 lb (13 kN). No free
fall is permitted.
D-rings: Dorsal, Frontal, Sternal, Shoulder
(pairs only).
Permitted Weight Capacity Range
ANSI: 130-310 lb (59-141 kg)
OSHA: 100-420 lb (45-191 kg)
Always defer to applicable connecting device to
determine permitted worker weight capacity
range for complete system.
Note: Capacity is the combined user weight
including all clothing, tools, and equipment.
Applicable Safety Standards
Meets or exceeds:
ANSI/ASSP Z359.11
OSHA 1910.140
OSHA 1926.502
Worker Classifications
Qualified Person: A person with an
accredited degree or certification, and
with extensive experience or suicient
professional standing, who is considered
proficient in planning/reviewing the
conformity of fall protection and rescue
systems.
Competent Person: A highly trained and
experienced person who is ASSIGNED
BY THE EMPLOYER to be responsible
for all elements of a fall safety program,
including, but not limited to, its regulation,
management, and application. A person
who is proficient in identifying existing and
predictable fall hazards, and who has the
authority to stop work in order to eliminate
hazards.
Authorized Person: A person who is
assigned by their employer to work around or
be subject to potential existing fall hazards.
Product Specific Applications
Fall Arrest: This harness may be used to
support a MAXIMUM 1 Personal Fall Arrest
System (PFAS) for use in Fall Arrest
applications. Structure must withstand
loads applied in the directions permitted by the
system of at least 5,000 lb (22,2 kN). Maximum
permitted free fall is 6 ft (1,8m), or up to 12 ft (3,6 m) if
used in combination with equipment explicitly
certified for such use.
D-rings: Dorsal, Sternal (Max. 2 ft (600 mm) fall
distance, feet first only).
Travel Restraint: This harness may be
used in Restraint applications. Restraint
systems prevent workers from reaching the
leading edge of a fall hazard. Always account for fully
extended length of connecting equipment. Structure
must withstand loads applied in the directions
permitted by the system of at least 1,000 lb (4,4 kN).
No free fall is permitted. Restraint systems may only
be used on surfaces with slopes up to 4/12 (vertical/
horizontal).
D-rings: Dorsal, Sternal, Hip (pairs only).
D-rings: Hip (pairs only).
