H3C WA2620X-AGNP Bedienungsanleitung

H3C WA2620X-AGNP Access Point

Installation Guide

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 5PW101-20110812

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot, Neocean, NeoVTL,

SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT,

XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co.,

Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage,

use, and disposal of this product must meet the applicable national laws and regulations.

Preface

The H3C WA2620X-AGNP AP Installation Guide describes the hardware specifications of the new

generation WA2600 802.11n outdoor AP, preparations before installation, installation procedure,

cabling and grounding, and login procedure. An appendix is included to describe how to crimp RJ-45

connectors.

This preface includes:

•Audience

•Conventions

•About the H3C WA2620X-AGNP documentation set

•Obtaining documentation

•Technical support

•Documentation feedback

Audience

This documentation is intended for:

•Network planners

•Field technical support and servicing engineers

•Network administrators working with the WA2620X-AGNP APs

Conventions

Symbols

Convention Description

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

NOTE An alert that contains additional or supplementary information.

About the H3C WA2620X-AGNP documentation

set

The H3C WA2620X-AGNP documentation set includes:

Category Documents Purposes

Marketing brochures Describe product specifications and benefits.

Product description and

specifications Technology white papers

Provide an in-depth description of software features

and technologies.

Category Documents Purposes

Compliance and safety

manual

Provides regulatory information and the safety

instructions that must be followed during installation.

Hardware specifications

and installation

Installation guide Provides a complete guide to hardware installation

and hardware specifications.

Configuration guides Describe software features and configuration

procedures.

Command references Provide a quick reference to all available

commands.

Configuration examples Describe typical network scenarios and provide

configuration examples and instructions.

Software configuration

Release notes

Provide information about the product release,

including the version history, hardware and software

compatibility matrix, version upgrade information,

technical support information, and software

upgrading.

Obtaining documentation

You can access the most up-to-date H3C product documentation on the World Wide Web at

http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents] – Provides hardware installation, software

upgrading, and software feature configuration and maintenance documentation.

[Products & Solutions] – Provides information about products and technologies, as well as solutions.

[Technical Support & Documents > Software Download] – Provides the documentation released with the

software version.

Technical support

cu[email protected]

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to inf[email protected].

We appreciate your comments.

Contents

Product overview·························································································································································· 1

Overview············································································································································································1

Hardware specifications···················································································································································1

LEDs············································································································································································2

Ports ···········································································································································································3

Preparing for installation ············································································································································· 6

Preparing installation tools···············································································································································6

Examining the installation site ·········································································································································6

Installation site selection ··········································································································································6

Temperature and humidity·······································································································································6

Power supply·····························································································································································7

Grounding and lightning protection·······················································································································7

Examining the AP······························································································································································8

Installing the AP···························································································································································· 9

Installing the outdoor antennas····································································································································· 11

Installing a directional antenna on a pole·········································································································· 11

Installing the omnidirectional antennas on poles······························································································· 13

Connecting cables ························································································································································· 15

Connecting the antenna cables ··························································································································· 15

Connecting the Ethernet cable ····························································································································· 16

Connecting the fiber cable··································································································································· 18

Connecting the AP to the power source ············································································································· 19

Connecting the grounding cable ························································································································· 20

Verifying the installation················································································································································ 20

Powering on the AP ······················································································································································· 20

Logging in to the AP···················································································································································22

Appendix A Crimping an RJ-45 connector ··············································································································23

Index ···········································································································································································25

Product overview

Overview

H3C WA2620X-AGNP access point (AP) is a new-generation AP that supports 802.11n and can work in

fit or fat mode. A fit AP can work with an access controller (AC) or wireless switch to provide WLAN

access. A fat AP can provide WLAN access alone. Figure 1 shows a typical networking scenario for

WA2620X-AGNP APs.

Figure 1 Deployment of WA2620X-AGNP APs (in fat mode)

WA2620X-AGNP

Core equipment

room RADIUS server

WLAN

management

system

Service database

server

Switch

Residential community

Seaport or pier

Parking lot

WA2620X-AGNP

Hardware specifications

The WA2620X-AGNP AP offers IP66 rated protection and allows for outdoor deployment. The following

sections describe its hardware specifications, LEDs, and ports.

Table 1 Hardware specifications

Item Description

Dimensions (H×W×D) 76 x 245 x 245 mm (2.99 x 9.65 x 9.65 in)

Weight 2.35 kg (5.18 lb)

Power consumption 12 W (standby) to 24 W (maximum)

Protocols and materials

•IEEE802.11a/b/g/n

•Waterproof cast aluminum + plastic housing

802.at Support for PoE+

LEDs

Figure 2 WA2620X-AGNP LEDs

Table 2 LED description

LED Color Quantity Description

POWER

(Power LED) Green 1

Indicates power status:

•On: The AP is powered on.

•Off: The AP is powered off or operates abnormally.

ETH1 (10/100M)

(10/100M Ethernet

port LED)

Green 1

Indicates Ethernet port status:

•Steady on: A link is present on the port.

•Off: No link is present on the port.

•Blinking: The port is transmitting or receiving data.

ETH1 (1000M) (GE

port LED) Green 1

Indicates Ethernet port status:

•Steady on: A link is present on the port.

•Off: No link is present on the port.

•Blinking: The port is transmitting or receiving data.

ETH2 (SFP) (GE fiber

port LED) Green 1

Indicates fiber port status:

•Steady on: A link is present on the port.

•Off: No link is present on the port.

•Blinking: The port is transmitting or receiving data.

LED Color Quantity Description

2.4G (802.11g/n LED) Green 1

Indicates wireless link status:

•Off: The wireless link is down or fails.

•Slow blinking: The wireless link is normal.

•Fast blinking: Data is being transmitted or received.

5G (802.11a/n LED) Green 1

Indicates wireless link status:

•Off: The wireless link is down or fails.

•Slow blinking: The wireless link is normal.

•Fast blinking: Data is being transmitted or received.

Ports

The WA2620X-AGNP AP provides three 2.4 GHz antenna ports and three 5.0 GHz antenna ports, a

console port, Ethernet ports (fiber and copper), and a grounding terminal.

Figure 3 WA2620X-AGNP port layout

(1) 2.4G-3 antenna port (2) 2.4G-2 antenna port (3) 2.4G-1 antenna port

(4) 5G-1 antenna port (5) 5G-2 antenna port (6) 5G-3 antenna port

(7) ETH2 (1000BASE-FX fiber port) (8) ETH 1 (10/100/1000BASE-TX copper port)

(9) Grounding terminal (10) Console port

Table 3 Port description

Port Standards and

protocols Function

ETH 2

1000BASE-FX fiber port

IEEE802.3

SFP MSA

SFF-8472

Connects to the Internet or Metropolitan Area

Network (MAN).

NOTE:

The SFP transceiver module (9/125μm single

mode fiber) uses an LC connector and delivers a

transmission speed of 1250 Mbps (central

wavelength: 1310 nm; output power: –9.5 dBm to

–3 dBm; receive sensitivity ≤–20 dBm; light

saturation: –3 dBm).

Port Standards and

protocols Function

ETH 1

10/100/1000BASE-TX

copper port

IEEE802.3

IEEE802.3u

IEEE802.3at

Connects to the Internet or MAN and serves as a

PoE port.

2.4G-1/2/3 IEEE802.11b/g/n Antenna port for 2.4 GHz band

5G-1/2/3 IEEE802.11a/n Antenna port for 5 GHz band

CONSOLE RS/EIA-232 Console port for configuration and management

Andere Handbücher für WA2620X-AGNP

Inhaltsverzeichnis

Andere H3C Drahtloser Zugangspunkt Handbücher

H3C

H3C WA2210-AG Bedienungsanleitung

H3C

H3C WA4320i-X Bedienungsanleitung

H3C

H3C WA5320X Bedienungsanleitung

H3C

H3C WA560 Bedienungsanleitung

H3C

H3C WA2610E-AGN Bedienungsanleitung

H3C

H3C WA510H Bedienungsanleitung

H3C

H3C WA5530i Bedienungsanleitung

H3C

H3C WA6600 Series Bedienungsanleitung

H3C

H3C WA4320-ACN-PI Bedienungsanleitung

H3C

H3C WA2600 Series Bedienungsanleitung

H3C

H3C WA530 Bedienungsanleitung

H3C

H3C WA2610-AGN Bedienungsanleitung

H3C

H3C WA5330 Bedienungsanleitung

H3C

H3C WA4320H-ACN Bedienungsanleitung

H3C

H3C WA538 Bedienungsanleitung

H3C

H3C WA6020 Bedienungsanleitung

H3C

H3C WA2612-AGN Bedienungsanleitung

H3C

H3C WA4320i-ACN Bedienungsanleitung

H3C

H3C WA6120X Bedienungsanleitung

H3C

H3C WA6620X Bedienungsanleitung

H3C

H3C WA2210-AG_INDOORSINGLEBANDAP Bedienungsanleitung

H3C

H3C WX6600 Series Bedienungsanleitung

H3C

H3C WA2200 Series Bedienungsanleitung

H3C

H3C WA4320H-EI Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung