H3C WA4320i-ACN Bedienungsanleitung

H3C WA4320i-ACN Access Point

Installation Guide

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6W100-20150610

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care, , IRF, NetPilot, Netflow,

SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of

Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage,

use, and disposal of this product must meet the applicable national laws and regulations.

Preface

The H3C WA4320i-ACN Access Point Installation Guide guides you through the installation of your AP.

It covers product overview, preparing for installation, installing the AP, logging in to the AP, and LEDs and

ports.

This preface includes:

•Audience

•Conventions

•Obtaining documentation

•Technical support

•Documentation feedback

Audience

This documentation is intended for:

•Network planners

•Field technical support and servicing engineers

•Network administrators working with the WA4320i-ACN APs

Conventions

This section describes the conventions used in this documentation set.

Command conventions

Convention Descri

tion

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars, from

which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select at least one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign can

be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Descri

tion

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Symbols

Convention Descri

tion

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

Network topology icons

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports

Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access controller

engine on a unified wired-WLAN switch.

Represents an access point.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.

Represents a security product, such as a firewall, UTM, multiservice security gateway, or

load-balancing device.

Represents a security card, such as a firewall, load-balancing, NetStream, SSL VPN, IPS,

or ACG card.

Port numbering in examples

The port numbers in this document are for illustration only and might be unavailable on your device.



Obtaining documentation

Access the most up-to-date H3C product documentation on the World Wide Web

at http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents]—Provides hardware installation, software

upgrading, and software feature configuration and maintenance documentation.

[Products & Solutions]—Provides information about products and technologies, as well as solutions.

[Technical Support & Documents > Software Download]—Provides the documentation released with the

software version.

Technical support

servic[email protected]

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to inf[email protected].

We appreciate your comments.

Contents

Product overview·························································································································································· 1

Preparing for installation ············································································································································· 3

Safety recommendations ··················································································································································3

Temperature and humidity requirements ························································································································3

Accessories provided with the AP ···································································································································3

Installation tools and equipment······································································································································4

Installing the AP···························································································································································· 5

Check before installation··················································································································································5

Determining the installation position·······························································································································5

Mounting the AP on a wall······································································································································6

Installing the AP on a ceiling ··································································································································9

Connecting the AP to the power supply ······················································································································ 11

Check before power-on ········································································································································ 11

Connecting PoE power supply····························································································································· 11

Connecting local power supply ··························································································································· 12

Check after power-on············································································································································ 12

Connecting the AP to the network································································································································ 13

Verifying network connection for the fit AP ········································································································ 13

Verifying network connection for the fat AP······································································································· 13

Logging in to the AP···················································································································································14

Logging in through the console port ···························································································································· 14

Setting up the configuration environment ··········································································································· 14

Connecting the console cable······························································································································ 14

Setting terminal parameters·································································································································· 15

Logging in through the console port···················································································································· 16

Logging in through Telnet or Web ······························································································································· 17

Appendix LEDs and ports ··········································································································································18

LEDs ················································································································································································· 18

Ports ················································································································································································· 18

Index ···········································································································································································20

Product overview

An H3C WA4320i-ACN AP can act as a fit AP to cooperate with wireless switches or access controllers

to provide wireless access for WLAN users. The network settings are configured on the wireless switches

or access controllers. The H3C WA4320i-ACN can also act as a fat AP to provide wireless access for

WLAN users.

Figure 1 Deployment of the WA4320i-ACN on hotspots (fit AP)

Figure 2 Deployment of the WA4320i-ACN on hotspots (fat AP)

Core equipment room

RADIUS

server

Wireless

NMS

Switch

Auditorium

Restaurant or

tea house

Hall or

information desk

Parking lot

Core equipment room

RADIUS

server

Wireless

NMS

Switch

Auditorium

Restaurant or

tea house

Hall or

information desk

Parking lot

Table 1 H3C WA4320i-ACN specifications

Item S

ecification

Protocol IEEE 802.11a/b/g/n/ac

Radio frequency Dual radio frequency

Built-in antennas

•2.4 G antenna: gain 3.1 to 5 dBi

•5 G antenna: gain 5.2 to 6.1 dBi

Power consumption 3.95 to 12.95 W

Dimensions (H × W × D) 54 × 220 × 220 mm (2.13 × 8.66 × 8.66 in)

Weight 0.75 kg (1.65 lb)

Preparing for installation

Safety recommendations

ARNING!

Only qualified personnel can install and remove the AP and its accessories. You must read all safety

instructions supplied with the AP before installation and operation.

To avoid possible bodily injury and equipment damage, read the following safety recommendations

before installing the AP. Note that the recommendations do not cover every possible hazardous

condition.

•Take adequate safety measures to avoid injury and AP damage.

•Place the AP in a dry and flat location and take anti-slip measures.

•Keep the AP clean and dust-free.

•Do not place the AP in a moist area and avoid liquid surrounding the AP.

•Keep the AP and installation tools away from walkways.

Temperature and humidity requirements

Item S

ecification

Operating temperature (indoor) –10°C to +55°C (14°F to 131°F)

Storage temperature –40°C to +70°C (–40°F to +158°F)

Operating humidity (noncondensing) 5% to 95%

Accessories provided with the AP

Mounting kit (AP bracket, mounting

bracket inner part, and mounting

bracket outer part, from left to right)

M4 × 30 pan head screw, washer,

and nut

Wall anchor kit

MAC address label

Console cable

(for fat AP only)

M4 × 10 pan head screw

Installation tools and equipment

When installing the AP, you may need the following tools. Prepare these tools and equipment yourself.

Needle-nose pliers Wire-stripping pliers Diagonal pliers Marker

Percussion drill with

matching drills Rubber hammer Phillips screwdriver

Inhaltsverzeichnis

Andere H3C Drahtloser Zugangspunkt Handbücher

H3C

H3C WA4320X Bedienungsanleitung

H3C

H3C WA Series Bedienungsanleitung

H3C

H3C WA6628E-T Bedienungsanleitung

H3C

H3C WA536 Bedienungsanleitung

H3C

H3C WX6600 Series Bedienungsanleitung

H3C

H3C WA5300 Series Bedienungsanleitung

H3C

H3C WA4320H-ACN Bedienungsanleitung

H3C

H3C WA2620X-AGNP Bedienungsanleitung

H3C

H3C WA6320H-HI Bedienungsanleitung

H3C

H3C WA6636 Bedienungsanleitung

H3C

H3C WA538 Bedienungsanleitung

H3C

H3C WA2620-AGN Bedienungsanleitung

H3C

H3C WA6320 Bedienungsanleitung

H3C

H3C WA6620X Bedienungsanleitung

H3C

H3C WA6020 Bedienungsanleitung

H3C

H3C WA530 Bedienungsanleitung

H3C

H3C WA6630X Bedienungsanleitung

H3C

H3C AR 18-3XE/18-21X Series Bedienungsanleitung

H3C

H3C WA560 Bedienungsanleitung

H3C

H3C WA2210-AG Bedienungsanleitung

H3C

H3C WA2610i-GN Bedienungsanleitung

H3C

H3C WA530 Bedienungsanleitung

H3C

H3C WA6330 Bedienungsanleitung

H3C

H3C WA2620i-AGN Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung