Halma Ocean Optics HL-2000-CAL Bedienungsanleitung
Halogen Calibration Light Source
HL-2000-CAL
A Product
Installation and Operation Manual
Document Number 000-10000-060-02-0505
Offices: Ocean Optics, Inc.
830 Douglas Ave., Dunedin, FL, USA 34698
Phone 727.733.2447
Fax 727.733.3962
8 a.m.– 8 p.m. (Mon-Thu), 8 a.m.– 6 p.m. (Fri) EST
Ocean Optics B.V. (Europe)
Geograaf 24, 6921 EW DUIVEN, The Netherlands
Phone 31-(0)26-3190500
F
ax 31-(0)26-3190505
Ocean Optics offers the most comprehensive, innovative and high-quality line of modular spectroscopy
tools in the world. Mikropack, a leading supplier of spectroscopy and thin film components, is an
essential and valuable partner in this enterprise. We have partnered with Mikropack because they are
committed to the same goals of innovation and quality that inspire us here at Ocean Optics. As always,
Ocean Optics conducts its business in an open, honest and technically available fashion. We invite you to
contact us at Ocean Optics, Inc. (see front cover for contact information) or Mikropack GmbH with any
technical questions, comments, or applications inquiries. Mikropack GmbH can be contacted at the
following location:
MIKROPACK GmbH
Maybachstraße 11
D-73760 Ostfildern
Germany
Tel.: +49 (0)711 34 16 96-0• Fax.: +49 (0)711 34 16 96-85
e-mail: [email protected]
internet: www.mikropack.de
Copyright © 2001-2005 Ocean Optics, Inc.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, by any means, electronic,
mechanical, photocopying, recording, or otherwise, without written permission from Ocean Optics, Inc.
This manual is sold as part of an order and subject to the condition that it shall not, by way of trade or otherwise, be lent, re-sold, hired out or
otherwise circulated without the prior consent of Ocean Optics, Inc. in any form of binding or cover other than that in which it is published.
Trademarks
Microsoft, Windows, Windows 95, Windows 98, Windows Me, Windows NT, Windows 2000, Windows XP and Excel are either registered
trademarks or trademarks of Microsoft Corporation.
Limit of Liability
Every effort has been made to make this manual as complete and as accurate as possible, but no warranty or fitness is implied. The information
provided is on an “as is” basis. Ocean Optics, Inc. shall have neither liability nor responsibility to any person or entity with respect to any loss or
damages arising from the information contained in this manual.
Important Safety Notices
1. Do not remove or modify any installed safety device on this equipment. Doing so will void your
warranty and create an unsafe operating environment.
2. Dangerous voltages are present in this device. There are NO user serviceable parts inside.
3. Only allow qualified personnel to service this unit.
4. Do not use the unit if it is damaged in any way. Contact your dealer for repair or replacement
information.
000-10000-060-02-0505 A
Important Safety Notices
B 000-10000-060-02-0505
Table of Contents
About This Manual .......................................................................................................... iii
Document Purpose and Intended Audience .............................................................................. iii
What’s New in this Document.................................................................................................... iii
Document Summary .................................................................................................................. iii
Product-Related Documentation................................................................................................ iii
Upgrades......................................................................................................................... iv
Chapter 1: Setup .................................................................................1
Overview.......................................................................................................................... 1
Unpacking the HL-2000-CAL .......................................................................................... 2
Contents .......................................................................................................................... 2
Connecting a Spectrometer to the HL-2000-CAL............................................................ 3
Configuring the OOIIrrad Software.................................................................................. 3
Chapter 2: HL-2000-CAL Specifications ...........................................5
Operating Environment.................................................................................................... 5
Specifications............................................................................................................................. 5
Chapter 3:Calibration.........................................................................7
Performing Calibration..................................................................................................... 7
Index.....................................................................................................9
000-10000-060-02-0505 i
Table of Contents
ii 000-10000-060-02-0505
About This Manual
Document Purpose and Intended Audience
This document provides you with an installation section to get your system up and running.
What’s New in this Document
This version of the Halogen Calibration Light Source HL-2000-CAL2000 Installation and Operation
Manual adds our partnership agreement.
Document Summary
Chapter Description
Chapter 1: Setup Contains a list of package contents and unpacking
instructions. Also contains procedures for connecting
to a spectrometer and configuring OOIIrrad software.
Chapter 2: HL-2000-CAL Specifications Contains operating environment specifications, as
well as other physical details of the product.
Chapter 3:Calibration Provides instructions for calibrating the spectrometer
connected to the HL-2000-CAL Light Source.
Product-Related Documentation
You can access documentation for Ocean Optics products by visiting our website at
http://www.oceanoptics.com. Select Technical →Operating Instructions, then choose the appropriate
document from the available drop-down lists. Or, use the Search by Model Number field at the bottom
of the web page.
You can also access operating instructions for Ocean Optics products on the Software and Technical
Resources CD included with the system.
Engineering-level documentation is located on our website at Technical →Engineering Docs.
000-10000-060-02-0505 iii
About This Manual
Upgrades
Occasionally, you may find that you need Ocean Optics to make a change or an upgrade to your system.
To facilitate these changes, you must first contact Customer Support and obtain a Return Merchandise
Authorization (RMA) number. Please contact an Ocean Optics Application Scientist for specific
instructions when returning a product.
iv 000-10000-060-02-0505
Chapter 1
Setup
Overview
The HL-2000-CAL Halogen Calibrated Light Source for the VIS-Shortwave NIR (300nm-1050nm) is a
tungsten-halogen light source that provides known absolute intensity values at several wavelengths,
expressed in µW/cm²/nm. Since the spectral intensity of the HL-2000-CAL can be traced to an intensity
standard provided by the National Institute of Standards and Technology (NIST), it is specifically
designed for calibrating the absolute spectral response of your system.
Note
If you have a spectrometer setup that is highly sensitive, you may not be able to use the
HL-2000-CAL as a calibration source.
Before using the HL-2000-CAL for the first time, check for transport damage. Be sure to adhere to all
warnings on the unit and in this operational manual. Make sure you have your HL-2000-CAL, your
spectrometer, an SMA-terminated optical fiber or CC-3 cosine-corrected irradiance probe, and Ocean
Optics OOIIrrad Irradiance Software.
The following sections provide instructions on unpacking and setting up your HL-2000-CAL Calibration
Light Source.
000-10000-060-02-0505 1
1: Setup
Unpacking the HL-2000-CAL
►Procedure
1. Unpack your lamp assembly and power supply carefully. Although the lamp is rigidly mounted,
dropping this instrument can cause permanent damage.
2. Inspect the outside of the instrument and make sure that there is no damage. Do not use the
instrument if damage is present.
3. Use this instrument in a clean laboratory environment (see Operating Environment).
Contents
Your DH-2000-CAL package should contain the following:
DL-2000-CAL unit
1 Switching AC adapter for stabilizing power
1 Power cord for supplying power to the power supply
2 Lamp Calibration Reports; one for using the HL-2000-CAL with a bare fiber and one for using
the HL-2000-CAL with a CC-3 cosine-corrected irradiance probe
1 disk that holds files for both lamp calibration reports
1 Allen wrench for adjusting the inner barrel of the SMA connector
2000-10000-060-02-0505
Inhaltsverzeichnis
Andere Halma Außenleuchte Handbücher
Beliebte Außenleuchte Handbücher anderer Marken
LIGMAN
LIGMAN BAMBOO 3 Bedienungsanleitung
Maretti
Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung
Maxim Lighting
Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung
urban ambiance
urban ambiance UQL1273 Bedienungsanleitung
TotalPond
TotalPond 52238 Bedienungsanleitung
Donner & Blitzen
Donner & Blitzen 0-02661479-2 Bedienungsanleitung