Hama 00076045 "EWS-800" Bedienungsanleitung

076045

„EWS-800“Weather Station

Wetterstation

25. 5

9. 11. 15

25.

9:53

1.4

TIME

DATE

IN OUT

DCF

HUMIDITY

TEMP

PRESSURE HISTORY

TEMP

HUMIDITY

SEC

MON

SET ALM SNOOZE

LIGHT +

MIN/MAX

°C

abs

hpa

-24h -21h -18h -15h -12h -9h -6h -3h 0h

°C

REMOTE SENSOR

RF WIRELESS

°C

RUS

Operating Instructions

Bedienungsanleitung

Mode d‘emploi

Instrucciones de uso

Руководство по эксплуатации

Istruzioni per l‘uso

Gebruiksaanwijzing

Οδηγίες χρήσης

Instrukcja obsługi

Controls and Displays

A Base station

1. Weather forecast symbol

2. Minimum/maximum data

3. Atmospheric pressure trend

4. Low(LO)/ high (HI) atmospheric pressure alarm

5. Atmospheric pressure value

6. Low(LO)/ high (HI) atmospheric pressure alarm, active

7. Relative/absolute atmospheric pressure

8. 24 hour (atmospheric pressure history)

9. Atmospheric pressure unit

10. Low(LO)/ high (HI) room temperature/room humidity alarm, active

11. Low(LO)/ high (HI) room temperature/room humidity alarm

12. Room temperature

13. Room temperature unit

14. Relative room humidity

15. Low(LO)/ high (HI) outdoor temperature/outdoor humidity alarm, active

16. Outdoor temperature/outdoor humidity lower (LO)/ higher (HI) alarm

17. Outdoor temperature unit

18. Outdoor temperature/dew point temperature

19. Outdoor transmitter signal

20. Relative outdoor humidity

21. Date

22. Summer time

23. DCF-controlled time

24. Time

25. Weekday/time zone

26. Alarm time, active

27. Wireless symbol

28. SET button = switching display mode/conrmation of set value

29. ALM button = displaying/setting/deactivating/activating the alarm functions

30. MIN/MAX button = accessing the saved maximum/minimum values/reduction of the current set value

31. +button = increasing the current set value

32. SNOOZE / LIGHT button = stopping the alarm/activating the backlight (approx. 10 seconds)/stopping

Settings

33. Opening for wall mounting

34. Battery compartment

35. Base

GOperating instruction

B Measuring station

36. Outdoor humidity

37. Outdoor temperature

38. Battery compartment

39. Opening for wall mounting

40. TX button = activating manual radio signal search

41. C/F button = switching between°C and°F

Thank you for choosing a Hama product.

Take your time and read the following instructions and information completely. Please keep these instructions

in a safe place for future reference. If you sell the device, please pass these operating instructions on to the

new owner.

1. Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicatesafety instructions or to draw your attentionto specic hazards

andrisks.

Note

This symbol is used to indicateadditionalinformationor important notes.

2. Package Contents

•Weather station EWS-800 (base station for indoors / outdoor measuring station)

•These operating instructions

3. Safety Notes

•The product is intended for private, non-commercial use only.

•Do not operate the product outside the power limits given in the specications.

•Do not use the product in moist environments and avoid splashes.

•Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.

•Do not use the product in areas where the use of electronic devices is not permitted.

•Only connect the product to a socket that has been approved for the device. The socket must be installed

close to the product and easily accessible.

•Do not drop the product and do not expose it to any major shocks.

•Do not open the device or continue to operate it if it becomes damaged.

•Do not attempt to service or repair the product yourself. Leave any and all service work to qualied experts.

•Keep the packaging material out of the reach of children due to the risk of suffocation.

•Dispose of packaging material immediately according to locally applicable regulations.

•Do not modify the product in any way. Doing so voids the warranty.

Warning – Batteries

•Immediately remove and dispose of dead batteries from the product.

•Only use batteries (or rechargeable batteries) that match the specied type.

•Do not mix old and new batteries or batteries of a different type or make.

•When inserting batteries, note the correct polarity (+ and - markings) and insert the batteries

accordingly. Failure to do so could result in the batteries leaking or exploding.

4. Getting Started

4.1 Measuring station

•Unscrew the screw on the battery compartment (38) on the back of the measuring station and open it.

•Insert two AAA batteries and close the battery compartment (38) and then secure the screw again.

Note

•Before use, ensure you insert the batteries in the measuring station rst and then in the base station.

4.2 Base station

•Open the battery compartment (34) and insert three AA batteries with the correct polarity into the battery

compartment. Close the battery compartment.

5. Installation

Note – Installation

•We recommend initially placing the base and measuring stations in the intended locations without

installing them and making all the settings described in 6. Operating the Base Station

•Only install the stations once the appropriate settings have been made and a stable wireless

connection is established.

Note

•The wireless transmission range between the measuring and base stations is up to 30 m in open

spaces. Before installation, ensure that wireless transmission will not be disrupted by interference or

obstacles like buildings, trees, vehicles, high-voltage lines, etc.

•Before the nal installation, ensure that there is sucient reception between the intended installation

locations.

•When installing the measuring station, ensure that it is protected from direct sunlight and rain.

•The international standard height for measuring air temperature is 1.25 m (4 ft) above ground.

Warning

•Buy special or suitable installation material from a specialised dealer for wall-mounting.

•Ensure that no faulty or damaged parts are installed.

•Never apply force during mounting. This could damage the product.

•Before mounting, ensure that the chosen wall is suitable for the weight to be mounted, and make sure

that there are no electrical wires, water, gas or other lines at the installation site on the wall.

5.1 Base station

•Use the base (35) to position the base station on a level surface.

•Alternatively, you can install the basestation on a wall using the opening (33) on the back.

5.2 Measuring station

•You can also position the measuring station on a level outdoor surface using the base.

•We recommend installing the measuring station securely on an outdoor wall.

•Install an anchor, screw, nail, etc. in the wall of your choice.

•Hang up the base/measuring station using the opening (33/39) intended for this purpose.

6. Operating the Base Station

Note – Input

•Hold down the MIN/MAX button (30) or the +button (31) to select the values faster.

If you press the SNOOZE / LIGHT button (32), the display will light up for approx. 10 seconds.

6.1. Automatic initial setup

•All available LCD segments on the display are displayed briey after turning the measuring station on for

the rst time.

•The base station then performs automatic initial setup. During setup, the base station performs measuring

station synchronisation, the pressure measurement values are stabilised and factory settings are set.

Note – Initial setup

•Initial setup takes approx. 3 minutes.

•Do not press any buttons during setup. Otherwise, values may not be transmitted correctly and there is

a risk of value errors and inaccuracies.

•The setup process is completed when the indoor (12, 14) and outdoor (18, 20) measurement data is

displayed

•After the rst time the base station is switched on and successful transmission is established between the

base station and the measuring station, the clock will automatically search for a DCF signal. During the

search, the wireless symbol (27) will ash.

Display Searching for the DCF signal

Flashing display

Active

Constant display

Successful – signal is being received

No display Error – signal search ended

Note – Time settings

•If, during the rst minute of the initial setup, no DCF signal can be found, the search is stopped and

repeated every two hours. The wireless symbol will go out.

•You can, however, set the time and the date manually.

•The clock automatically continues to search for the DCF signal on a daily basis. If the signal is received

successfully, the manually-set time and date are overwritten.

Note – Summer time

The clock automatically switches to summer time. appears on the display as long as summer time

is activated.

6.2. Basic and manual settings

•Press and hold the SET button (28) for approx. 3 seconds to make the following settings one after the other:

•Time zone (24)

•12/24 hour format (24)

•Hours (24)

•Minutes (24)

•Year (21)

•Month (21)

•Day (21)

•Temperature unit (°C / °F) (13+17)

•Room temperature value (12)

•Room humidity value (14)

•Outdoor temperature value (18)

•Outdoor humidity value (20)

•Atmospheric pressure unit (hPa / inHg) (5+9)

•Relative atmospheric pressure reference value (5)

•Atmospheric pressure threshold value (5)

•Storm threshold value (5)

•To select the individual values, press the MIN/MAX button (30) or the +button (31) and conrm each

selection by pressing the SET button (28).

•Press the SET button (28) to adopt the set value displayed and to skip.

•If you do not make an entry for 20 seconds, you automatically exit setup mode. Alternatively, press the

SNOOZE / LIGHT button (32) to exit setup mode before selecting all the values.

Note – Time zone

•The DCF signal can be received over a wide range, but always corresponds to the applicable Central

European Time in Germany. Make sure you account for the time difference in countries with another

time zone.

•If you are in Moscow, the time is 3 hours later than in Germany. This means that you should set +3 for

the time zone. The clock then automatically sets itself 3 hours ahead after receiving the DCF signal or

according to the manually set time.

Note – Temperature and humidity

•In terms of accuracy, the temperature and air humidity measurement is intended for private, non-

commercial use.

•In individual cases, the measured values displayed may differ slightly from comparison values, e.g.

values from a calibrated measuring device. Using the Basic and manual settings, you can adjust and

recalibrate the values for the room/outdoor temperature and/or the humidity.

•We recommend that you do not manually calibrate the measured values, press the SET button (28)

during manual setup to skip this step.

Note – Atmospheric pressure

•The absolute atmospheric pressure (abs) is a value measured at the installation location that cannot

be changed.

•The relative atmospheric pressure (rel) is the absolute atmospheric pressure at the installation location

corrected to the atmospheric pressure at sea level (msl).

•The reference value for relative atmospheric pressure is set to 1013.2 hPa as standard. For an exact

measurement, adapt the reference value to your location. You can manually set the reference value to

within a range of 919.0 hPa and 1080.0 hPa.

•Information on the current relative atmospheric pressure for you location is available on the Internet,

from your local meteorological oce, on the radio, etc.

Note – Atmospheric pressure threshold value

•The weather forecast is based on atmospheric pressure changes, and you individually set their

threshold values between 2 hPa and 4 hPa. The threshold value is set to 3 hPA as standard.

•A decrease or increase in the atmospheric pressure by at least the set threshold value is registered as

a change in the weather.

•For locations with frequent changes in atmospheric pressure, we recommend you set a higher

atmospheric threshold value than for locations with a relatively constant atmospheric pressure.

Note – Storm threshold value

•The storm forecast is also based on atmospheric pressure changes, and you individually set their

threshold values between 3 hPa and 9 hPa. The threshold value is set to 6 hPA as standard.

•The storm warning display is activated if, over a period of three hours, there is a decrease or increase in

the atmospheric pressure by at least the set threshold value.

•When the storm warning display is activated, the rain symbol and the trend arrow ash for three hours.

6.3. Weather forecast

•Based on changes in the atmospheric pressure and the data saved, the base station is able to make

weather forecasts for the next 12 to 24 hours.

Note – Weather forecast

•The weather forecast function is not available during the rst few hours of operation because it

requires data that is collected during operation.

•The weather forecast and the current weather are indicated by four different symbols (1):

Symbol (1) Weather

Sun

Slightly cloudy

Cloudy

Rain

•Based on the measured barometer values, the atmospheric pressure trend for the next few hours is

displayed between the weather forecast symbols.

Display (3) Atmospheric pressure trend / weather forecast

Increasing / Weather is improving

Decreasing / Weather is getting worse

•The weather symbols change depending on the current relative atmospheric pressure and atmospheric

pressure changes within the past six hours. If the weather is changing, the atmospheric pressure trend

arrows (3) ash for three hours to indicate the change in weather. The arrows (3) stop ashing when the

weather conditions have subsequently stabilised and the station has not detected any further changes in

weather.

Examples:

Display Meaning

Weather forecast: Rain

Atmospheric pressure trend: Decreasing / Weather is getting worse

Current weather: Cloudy

Current weather: Slightly cloudy

Atmospheric pressure trend: Increasing / Weather is improving

Weather forecast: Sun

•The bar graph (8) shows the history of the relative atmospheric pressure within the last 24 hours.

6.4. Temperature / atmospheric pressure display mode

•Press the SET button (28) repeatedly to change between the following displays:

•Outdoor temperature (18: TEMP)/ Dew point temperature (18: DEWPOINT)

•Absolute atmospheric pressure (7: abs)/Relative atmospheric pressure (7: rel)

The applicable display begins to ash.

•While the display is ashing, press the MIN/MAX button (30) or the + button (31) to switch between the

outdoor temperature and the dew point or between the absolute and relative atmospheric pressure.

•Conrm your display selection by pressing the SET button (28).

Inhaltsverzeichnis

Sprachen:

Andere Hama Wetterstation Handbücher

Hama

Hama EWS-2050 Bedienungsanleitung

Hama

Hama EWS-120 Bedienungsanleitung

Hama

Hama EWS-280 Bedienungsanleitung

Hama

Hama EWS-100 Bedienungsanleitung

Hama

Hama EWS Intro Bedienungsanleitung

Hama

Hama TH-130 Bedienungsanleitung

Hama

Hama Action Bedienungsanleitung

Hama

Hama EWS-370 Bedienungsanleitung

Hama

Hama EWS-200 Series Bedienungsanleitung

Hama

Hama Premium 00186380 Bedienungsanleitung

Hama

Hama Color Edge 186312 Bedienungsanleitung

Hama

Hama 00092659 EWS-165 Bedienungsanleitung

Hama

Hama 176596 Bedienungsanleitung

Hama

Hama EWS-110 Bedienungsanleitung

Hama

Hama TH50 Bedienungsanleitung

Hama

Hama Premium Bedienungsanleitung

Hama

Hama EWS-180 Bedienungsanleitung

Hama

Hama EWS-150 Bedienungsanleitung

Hama

Hama EWS-700 Bedienungsanleitung

Hama

Hama 00092659 EWS-165 Bedienungsanleitung

Hama

Hama WFC840 Bedienungsanleitung

Hama

Hama METEOTIME Bedienungsanleitung

Hama

Hama 00136256 EWS-3000 Bedienungsanleitung

Hama

Hama TS-200 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung