Hama EWS-152 Bedienungsanleitung

123126

EWS-152

Weather Station

Wetterstation

RUS

Operating Instructions

Bedienungsanleitung

Mode d‘emploi

Instrucciones de uso

Gebruiksaanwijzing

Istruzioni per l‘uso

Οδηγίες χρήσης

Instrukcja obsługi

Návod kpoužití

Návod na použitie

Manual de instruções

Manual de utilizare

Bruksanvisning

Käyttöohje FIN

MODE

GOperating instruction

Controls and Displays

ABase station

1. Outdoor temperature

2. Battery symbol

3. Room temperature

4. Time

5. Summer time

6. Wireless symbol

7. button =Increases the current setting/Toggles 12/24 hour format/Manual

search for signal from the measuring station

8. MODE button =Settings/Conrms the setting

9. button =Decreases the current setting/Toggles between °C and °F/Activates/

deactivates manual radio signal reception

10. Battery compartment

BMeasuring station

11. Transmission indicator lamp

12. Opening for wall mounting

13. Battery compartment

Thank you for choosing aHama product.

Take your time and read the following instructions and information completely.Please

keep these instructions in asafe place for futurereference. If you sell the device, please

pass these operating instructions on to the new owner.

1. Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicate safety instructions or to draw your attention to

specic hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

2. Package Contents

•Weather Station EWS-152

(base station for indoor/outdoor measuring station)

•4AAA batteries

•These operating instructions

3. Safety Instructions

•The product is intended for private, non-commercial use only.

•Donot operate the product outside the power limits given in the specications.

•Donot use the product in moist environments and avoid splashes.

•Donot use the product in the immediate vicinity of heaters or other heat sources

or in direct sunlight.

•Donot use the product in areas wherethe use of electronic devices is not permitted.

•Donot place the product near interference elds, metal frames, computers, TVs,

etc. Electronic devices and window frames can negatively affect the product’s

functionality.

•Donot drop the product and do not expose it to any major shocks.

•Donot open the device or continue to operate it if it becomes damaged.

•Donot attempt to service or repair the product yourself.Leave any and all service

work to qualied experts.

•Keep the packaging material out of the reach of children due to the risk of

suffocation.

•Dispose of packaging material immediately according to locally applicable

regulations.

•Donot modify the product in any way.Doing so voids the warranty.

Warning –Batteries

•Immediately remove anddispose of dead batteriesfromthe product.

•Onlyuse batteries(or rechargeable batteries) that match thespecied type.

•Donot mixold andnew batteriesorbatteriesofadifferent type or make.

•When inserting batteries, note thecorrect polarity(+and -markings) and

insert thebatteriesaccordingly. Failure todosocould resultinthe batteries

leakingorexploding.

•Donot charge batteries.

•Keepbatteriesout of thereach of children.

4. Getting Started

4.1 Measuring station

•Open the battery compartment (13) and insert two AAA batteries with the correct

polarity.Close the battery compartment.

Note

Beforeuse, ensureyou insert the batteries in the measuring station rst and then

in the base station.

4.2 Base station

•Open the battery compartment (10) and insert two AAA batteries with the correct

polarity.Close the battery compartment.

5. Installation

Note –Installation

•Werecommend initially placing the base and measuring stations in the

intended locations without installing them and making all the settings described

in 6. Operating –todo

•Only install the stations once the appropriate settings have been made and a

stable wireless connection is established between the stations.

Note

•The wireless transmission range between the measuring and base stations is up

to 30 minopen spaces.

•Beforeinstallation, ensurethat wireless transmission will not be disrupted by

interference or obstacles like buildings, trees, vehicles, high-voltage lines, etc.

•Beforethe nal installation, ensurethat thereissucient reception between the

intended installation locations.

•When installing the measuring station, ensurethat it is protected from direct

sunlight and rain.

•The international standardheight for measuring air temperatureis1.25 m(4

ft) above ground.

Warning

•Buy special or suitable installation material from aspecialised dealer for

wall-mounting.

•Ensurethat no faulty or damaged parts areinstalled.

•Never apply force during installation. This could damage the product.

•Beforeinstallation, ensurethat the chosen wall is suitable for the weight to be

installation, and make surethat thereare no electrical wires, water,gas or other

lines at the installation site on the wall.

5.1 Base station

•Use the base to position the base station on alevel surface.

5.2 Measuring station

•You can also position the measuring station on alevel outdoor surface.

•Werecommend installing the measuring station securely on an outdoor wall using

the opening (12). Install an anchor,screw,nail, etc. in the wall of your choice.

•Hang up the base/measuring station using the opening intended for this purpose.

6. Operation

Note –Input

Hold down the button (7) or the button (9) to select values faster.

6.1 Connection to the measuring station

•After you insert the batteries, the base station automatically searches for a

connection to the measuring station and performs initial setup.

Note

•Initial setup takes approx. 3minutes.

•Donot press any buttons during setup. Otherwise, values may not be

transmitted correctly and thereisarisk of value errors and inaccuracies.

•The setup process is completed when the indoor (3) and outdoor (1)

measurement data is displayed.

•Ifthe base station still does not receive asignal from the measuring station ,press

and hold the button (7) for approx. 3seconds to start the manual search for

the signal.

6.2 Basic and manual settings

Automatic setting using the DCF signal

•After the base station is switched on for the rst time and successful transmission

is established between the base station and the measuring station, the clock will

automatically search for aDCF signal. During the search, the wireless symbol (6)

will ash.

Display Searching for the DCF signal

Flashing

Active

Displayed continuously

Successful –signal is being received

No display Deactivated

•Ifthe station still does not receive asignal, press and hold the button (9) for

approx. 3seconds to start the manual search for the DCF signal. The wireless

symbol (6) will start to ash.

Note –Time settings

•The search process takes about 7minutes. If the search fails, it ends and is

repeated at the next clock hour.The wireless symbol (6) will go out.

•Inthe meantime you can, however,set the time and the date manually.

•The clock automatically continues to search for the DCF signal on adaily basis

(between 1:00 a.m. and 3:00 a.m.). If the signal is received successfully,the

manually-set time and date areoverwritten.

Note –Summer time

•The clock automatically switches to summer time. Sappears on the display as

long as summer time is activated.

•Press and hold the button (9) again for approx. 3seconds to stop the manual

search.

Manually setting the date/time

•Press and hold the button (9) for approx. 3seconds to stop the search for the

DCF signal. The wireless symbol (6) goes out and you can set the time manually.

•Press and hold the MODE button (8) for approx. 3seconds to start manually setting

the date/time.

•Set the following information in the order listed:

•Time zone (difference in hours), hour,minute.

•Toselect individual values, press the button (7) or the button (9) and conrm

each selection by pressing the MODE button (8). .

•Ifyou do not make an entry for 20 seconds, you automatically exit setup mode.

Note –Time zone

•The DCF signal can be received over long distances, but always transmits the

current Central European Time in Germany.Make sureyou account for the time

difference in countries with another time zone.

•Ifyou areinMoscow,the time is 3hours later than in Germany.This means that

you should set +3 for the time zone. The clock then automatically sets the time

to 3hours after the DCF signal received or relative to the manually set time.

Celsius/Fahrenheit

•Press the button (9) to switch between °C and °F for the temperaturedisplay.

12/24 hour format

•Press the button (7) to switch the time between the 12 and 24 hour format.

6.3 Low battery capacity

As soon as the battery symbol (2) appears on the display of the base station, the

capacity of the batteries in the measuring station is very low.Replace the batteries

immediately.

Note –Replacing the batteries

•Note that the stations have to be resynchronised each time after you change

the batteries in the measuring or base station.

•Todothis, remove the batteries from the other station and then reinsert them,

or change them as required.

7. Care and Maintenance

Only clean this product with aslightly damp, lint-free cloth and do not use aggressive

cleaning agents.

8. Warranty Disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage

resulting from improper installation/mounting, improper use of the product or from

failuretoobserve the operating instructions and/or safety notes.

9. Service and Support

Please contact Hama Product Consulting if you have any questions about this product.

Hotline: +49 9091 502-115 (German/English)

Further support information can be found here:

www.hama.com

Andere Handbücher für EWS-152

Inhaltsverzeichnis

Sprachen:

Andere Hama Wetterstation Handbücher

Hama

Hama EWS-900 Bedienungsanleitung

Hama

Hama EWS-380 Bedienungsanleitung

Hama

Hama Color Bedienungsanleitung

Hama

Hama EWS-700 Bedienungsanleitung

Hama

Hama EWS-100 Bedienungsanleitung

Hama

Hama EWS-200 Series Bedienungsanleitung

Hama

Hama WDS-300 Bedienungsanleitung

Hama

Hama EWS-500 Bedienungsanleitung

Hama

Hama EWS-180 Bedienungsanleitung

Hama

Hama WFC-970 Bedienungsanleitung

Hama

Hama i@Sky Bedienungsanleitung

Hama

Hama TH500 Bedienungsanleitung

Hama

Hama EWS-1200 Bedienungsanleitung

Hama

Hama EWS-151 Bedienungsanleitung

Hama

Hama EWS-720 Bedienungsanleitung

Hama

Hama EWS-400 Bedienungsanleitung

Hama

Hama 00092659 EWS-165 Bedienungsanleitung

Hama

Hama 00092659 EWS-165 Bedienungsanleitung

Hama

Hama 00176596 Bedienungsanleitung

Hama

Hama WFC820 Bedienungsanleitung

Hama

Hama WFC-500 Bedienungsanleitung

Hama

Hama EWS 1500 Bedienungsanleitung

Hama

Hama EWS-3100 Bedienungsanleitung

Hama

Hama Magic Color Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung