Hama EWS Series Bedienungsanleitung

Wetterstation

Weather Station EWS-

Trio

136293

Operating Instructions

Bedienungsanleitung

Mode d‘emploi

Instrucciones de uso

Руководство по эксплуатации

Istruzioni per l‘uso

Instrukcja obsługi

Návod k použití

Návod na použitie

Manual de utilizare

RUS

A B

1 3

2 4

5 6 7

8 9

10 11

12 13 19

18 20

14 15 16

Operating instruction

Controls and

Displays A Base

station

Time

Room temperature

Day ofthe week + date + calendar month DCF

signal radio symbol

Room humidity

Outdoor temperature/outdoor humidity channel 1

(

CH1

), low battery level display for measuring

Thank you for choosing a Hama product.

Take your time and read the following instructions and

information completely. Please keep these instructions in a

safe place for future reference. If you sell the device, please

pass these operating instructions on to the new owner.

1. Explanation of Warning Symbols and Notes

station 1

Outdoor temperature/outdoor humidity channel 2

(

CH2

), low battery level display for measuring

station 2

Outdoor temperature/outdoor humidity channel 3

(

CH3

), low battery level display for measuring

station 3

ALARM

button = displaying/setting/deactivating/

activating the alarm functions

button = manual search for a signal from

the

measuring station/channel selection

10.

SNZ/LIGHT

button = temporarily interrupts

the

alarm (snooze)/activates the backlight

11.

SET

button = settings/confirms the setting

12.

button = increases the current set

value/recalls the saved maximum/minimum

values (MAX/MIN)

13.

Down

button = decreases the current set

value/

toggles between °C and °F /

activates/deactivates

manual DCF radio signal

reception

14. + 16. Fold-out bases

15. Battery compartment

B Measuring station

17.

Transmission indicator light

18.

button = manual connection tothe

base

station

19.

Recess for wall mounting

20.

Slide switch = selects channel 1, 2 or3

21.

Battery compartment

Package Contents

•

Trio weather station (base station for indoors)

•

3 measuring stations for outdoors

•

3 AAA batteries

•

6 AA batteries

•

These operating instructions

Safety Notes

•

The product is intended for private, non-commercial use

only.

•

Do not operate the product outside the power limits given

in the specifications.

•

Do not use the product in moist environments and avoid

splashes.

•

Do not use the product in the immediate vicinity of heaters

or other heat sources or in direct sunlight.

•

Donot use the product inareas where the use of electronic

devices is not permitted.

•

Do not place the product near interference fields, metal

frames, computers, TVs, etc. Electronic devices and window

frames can negatively affect the product’s functionality.

•

Do not drop the product and do not expose itto any major

shocks.

This symbol is used to indicate safety instructions or to

draw your attention to specific hazards and risks.

Warning

This symbol is used to indicate additional information or

important notes.

Not

•

Do not open the device or continue to operate itif it

becomes damaged.

•

Do not attempt to service or repair the product yourself.

Leave any and all service work to qualified experts.

•

Keep the packaging material out of the reach of children

due to the risk of suffocation.

•

Dispose of packaging material immediately according to

locally applicable regulations.

•

Do not modify the product in any way.Doing so voids the

warranty.

•

Use the

slide switch

(20) to select the channel that

the

respective measuring station is to use for

transmission. Each of the three measuring stations must

use a different

channel!

•

Close the batterycompartment.

4.2

Base station

•

Open the

battery compartment

(15) and insert

three

AAAbatteries with the correct polarity into the

battery

compartment.

•

Then close the battery compartment cover.

4.3

Replacing the batteries

4.Getting started

4.1 Measuring station

•

Open the

battery compartment

(21) and insert

two

AAbatteries with the correct polarity into the

battery

compartment.

Measuring station

•

If the

symbol is displayed on the basis station in the

measurement values area of one of the three measuring

stations (5/6/7), replace the two AA batteries of the

affected measuring station with two new ones.

•

Open the battery compartment (21), remove and properly

dispose of the depleted batteries, and insert two new AAA

batteries with the correct polarity. Then close the battery

compartment cover.

Base station

•

If the

symbol is displayed on the base station inthe

indoor values area (2), replace the three AAA batteries in

the base station with three new ones.

•

Open the battery compartment (15), remove and properly

dispose of the dead batteries and insert three new AAA

batteries with the correct polarity. Then close the battery

compartment cover.

•

Note that the stations have to be resynchronised each

time after you change the batteries inthe measuring

or base station.

•

To do this, remove the batteries from the other station

and thenreinsert them, or change them asrequired.

Note –Replacing the batteries

•

Immediately remove and dispose of dead batteries from

the product.

•

Only use batteries (or rechargeable batteries) that

match the specifiedtype.

•

Do not mix old and new batteries or batteries of a

different type or make.

•

When inserting batteries, note the correct polarity (+

and - markings) and insert the batteries accordingly.

Failuretodosocouldresult inthe batteries leaking or

exploding.

•

Do not charge batteries.

•

Keep batteries out of the reach of children.

•

Do not short circuit the batteries/rechargeable batteries

and keep them away from uncoated metal objects.

Warning –Batteries

Before use, make sure that you insert the batteries in the

measuring station first and then in the base station.

Not

5.Installati

5.1

Base station

•

Use the base to position the base station on a level

surface.

5.2 Measuring station

•

You can also position the measuring station on a level

outdoor surface.

•

We recommend installing the measuring station securely

on an outdoor wall using the opening (19).

6.Operation

6.1

Connection to the measuring station

After you have inserted the batteries, the base station

automatically searches for a connection to the three

measuring stations and performs initial setup.

•

If a signal from the measuring station isstillnotreceived,

select one of the three channels by pressing the

button

(9). Then hold the

button (9) for

approximately 3 seconds to start the manual search

for the signal.

•

Press the

button (18) on the desired measuring

station

to initiate the transmission of a signal that can be

received

by the base station.

•

Remember that each of the three measuring stations

must use a different channel.

•

Initialsetuptakesapproximately3minutes.

•

During the connection attempt, the measuring station

radio symbol will flash.

•

Do not press any buttons during setup. Otherwise,

values may not be transmitted correctly and there is a

risk of value errors and inaccuracies.

•

The process is completed when the indoor (2/4) and

outdoor (5/6/7) measurement data is displayed.

Not

•

Werecommend initially placing the base station and

measuring station(s) in the intended locations without

installing them and making all the settings described in

6. Operation

•

Only install the stations once the appropriate settings

have been made and astable wireless connection is

established.

Note –Installation

•

The wireless transmission range between the measuring

and base stations is up to 50 m in open spaces.

•

Before installation, ensure that wireless transmission

will not be disrupted by interference or obstacles like

buildings, trees, vehicles, high-voltage lines, etc.

•

Before the final installation, ensure that there is

sufficient reception between the intended installation

locations.

•

When installing the measuring station, ensure that it is

protected from direct sunlight and rain.

•

The international standard height for measuring air

temperature is 1.25 m (4 ft) above ground.

Not

•

Buy special or suitable installation material from a

specialised dealer for wall-mounting.

•

Ensure that no faulty or damaged parts are installed.

•

Never apply force during installation. This could

damage the product.

•

Before installation, ensure that the chosen wall is

suitable for the weight to be mounted, and make sure

that there are noelectrical wires, water, gas or other

lines at the installation site on the wall.

arning

6.2

Basic and manual settings

Automatic setting using the DCF signal

(radio- controlled clock)

•

When the base station has been switched on for the first

time and successful transmission has been established

between the base station and the measuring station, the

clock will automatically search for the DCF signal. During

the search, the radio symbol

for DCF reception flashes.

Display (8)

Searching for the DCF signal

Display flashing

Active

Displayed continuously

Successful –signal is being received

Not displayed

Deactivated

•

If the station still does not receive a signal, press and hold

the

DOWN

button(13)untiltheradiosymbolbegins

to flash, to start the manual search for the DCF

signal.

Manualsettings

•

Press the

SET

button (11) to make the following

settings

in order:

•

Time zone

•

Year

•

Calendar month

•

Date

•

Hour

•

Minute

•

12/24-hour format

•

To select individual values, press the

button (12) or

the

DOWN

button (13) and confirm each selection by

pressing

the

SET

button(11).

•

Press the

SET

button (11) to adopt the set value

displayed

and to skip.

•

If you do not make an entry for 20seconds, you

automatically exit the setting mode.

•

Press and hold the

DOWN

button (13) again for

approximately 3 seconds to stop the manual search.

•

Hold the

button (12) or the

DOWN

button (13)

select the values faster.

Not

•

Theclockautomaticallyswitchestosummertime.

Note –Summer time

•

The search process takes about 3 minutes. If the search

fails, it ends and is repeated at the next clock hour. The

radio symbol ( ) goes out.

•

Itisnot possible tomanually set the time and date

during the search for the DCF signal.

•

The clock automatically continues to search for the DCF

signal ona daily basis (between 1 amand 5 am)to

correct any deviations.

•

If the signal is received successfully, the manually set

time and date are overwritten.

Note –Time settings

•

The DCF signal can be received over long distances, but

always transmits the current Central European Time in

Germany. Please note that for countries with a different

time zone, you must set the time difference manually.

•

If you are in Moscow, for example, the time is 3 hours

later than in Germany. This means that you should

set +3for the time zone. The clock then sets the time

automatically to 3 hours ahead after receiving the DCF

signal or according to the manually set time.

Note –Time zone

Celsius / Fahrenheit

•

Press the

DOWN

button (13) to switch between °C and

°F

for the temperature display.

6.3

Alarm

Alarm mode

is displayed between the hours and

minutes

of the time display.

•

Pressthe

ALARM

button(8)oncetocall up alarm

mode.

•

Press and hold the

ALARM

button (8) for

approximately

3 seconds to set the alarm time. The

hours display begins

to flash.

•

Press the

button (12) or the

DOWN

button

(13)

to select the hour for the alarm time and

confirm your

selection by pressing the

ALARM

button (8). The

minutes

display begins to flash.

•

Repeat the process to set the minutes for the alarm time.

•

If you do not make an entry for approximately 5 seconds,

you automatically exit the setting mode.

•

Press the

DOWN

button (13) to activate or

deactivate the alarm. An active alarm is displayed by

the alarm symbol ( ). The alarm symbol goes out

when the alarm

is deactivated.

•

If the alarm is triggered, the alarm symbol ( ) will begin

to flash and an alarm will sound.

•

Press any button (except the

SNZ/LIGHT

button (10))

stop the alarm. Otherwise, it will stop automatically

after

2 minutes.

6.4 Maximum and minimum

temperature and humidity values

The base station automatically stores the maximum and

minimum outdoor/indoor temperature and humidity values.

•

Repeatedly pressthe

button(12)toswitchthe

display between the current temperature and humidity,

maximum temperature and humidity (MAX) and minimum

temperature and humidity (MIN).

6.5

Backlight

•

Press the

SNZ/LIGHT

button (10) to light up the

display

for approximately 5 seconds.

Care and Maintenance

•

Only clean this product with a slightly damp, lint-free cloth

and do not use aggressive cleaning agents.

•

Make sure that water does not get into the product.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no

warranty for damage resulting from improper installation/

mounting, improper use of the product or from failure to

observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any

questions about this product.

Hotline: +49 9091 502-115 (German/English)

Further support information can be found here:

www.hama.com

•

While the alarm signal issounding, press the

SNZ/

LIGHT

button (10) to activate the snooze function.

The alarm symbol ( ) will start to flash on the display.

The alarm signal will stop for 5 minutes, after which it

will

sound again.

•

Press any button (except the

SNZ/LIGHT

button)

stop the snooze function and the alarm.

Note –Snooze function

10.

Technical Data

Base station

Measuring station

Power supply

4.5 V

3x AAA batteries

3.0 V

2 x AAbatteries

We recommend using AA lithium batteries for

the outdoor sensors when outdoor

temperatures are below 0°C/32°F.

Measuring range:

Temperature

0°C – +50°C / 32°F – +122°F

-40°C – +70°C / -40°F – +158°F

Humidity

10 –

–

Measurement increments:

Temperature

0.1°C/ 0.2°F

Humidity

Radio-controlled DCF clock

Yes

Thermometer

Yes

Hygrometer

Yes

Alarm function

Yes

Max. number of measuring stations

Range

≤ 30m

11.

Recycling Information

Note on environmental protection:

After theimplementation of the European Directive

2012/19/EU and 2006/66/EU in the national legal

system, thefollowing applies: Electric and electronic

devices as well as batteries must not bedisposed of

with household waste. Consumers are obliged by law to

return electrical and electronic devices as well as batteries at the

end of their service lives to the public collecting points set up for

this purpose or point of sale. Details to this are defined by the

national law of the respective country. This symbol on the product,

the instruction manual or the package indicates that a product is

subject to these regulations. By recycling, reusing the materials or

other forms of utilising old devices/batteries, you are making an

important contribution to protecting our environment.

12. Declaration of Conformity

Hereby, Hama GmbH & Co KG declares that the

radio equipment type [00136293] is incompliance

with Directive 2014/53/EU. The full text of the EU

declaration of conformity is available at the following internet

address: www.hama.com -> 00136293 -> Downloads.

Frequency band(s)

433 MHz

Maximum radio-frequency power

transmitted

9,419 mW

Inhaltsverzeichnis

Andere Hama Wetterstation Handbücher

Hama

Hama EWS-720 Bedienungsanleitung

Hama

Hama EWS-151 Bedienungsanleitung

Hama

Hama 00092659 EWS-165 Bedienungsanleitung

Hama

Hama EWS-100 Bedienungsanleitung

Hama

Hama EWS-400 Bedienungsanleitung

Hama

Hama EWS-380 Bedienungsanleitung

Hama

Hama 186421 Bedienungsanleitung

Hama

Hama Magic Color Bedienungsanleitung

Hama

Hama EWS-152 Bedienungsanleitung

Hama

Hama TH-200 Bedienungsanleitung

Hama

Hama EWS-890 Bedienungsanleitung

Hama

Hama EWS-800 Bedienungsanleitung

Hama

Hama 00186369 Bedienungsanleitung

Hama

Hama EWS-2050 Bedienungsanleitung

Hama

Hama WDS-300 Bedienungsanleitung

Hama

Hama EWS-170 Bedienungsanleitung

Hama

Hama WFC820 Bedienungsanleitung

Hama

Hama 00136263 EWS-3300 Bedienungsanleitung

Hama

Hama 99123148 EWS-710 Bedienungsanleitung

Hama

Hama Rainy Bedienungsanleitung

Hama

Hama EWS-1200 Bedienungsanleitung

Hama

Hama EWS-750 Bedienungsanleitung

Hama

Hama EWS-200 Series Bedienungsanleitung

Hama

Hama Color Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung