Hantek DDS-3005 USB Bedienungsanleitung

User’s Guide

DDS-3005 USB

Operation Manual

 
Table of Contents 
Chapter 1 Introduction...............................................................................1 
1 Introduction................................................................................1 
2 Working Principle......................................................................1 
3 Hardware Specification............................................................2 
Chapter 2 Installation.................................................................................4 
1 System requirements...............................................................4 
2 Shape and Terminal Illustration..............................................4 
Chapter 3 Software Operations..................................................................8 
1 Installing the Hardware............................................................8 
2 Installing the Software............................................................12 
3 Run the DDS-3005 USB........................................................13 
4 Choose the Wave Forms.......................................................14 
5 Waveform Parameter Setup..................................................14 
6 Counter/ Frequency Measurement......................................15 
7 Waveform Output Control......................................................16 
8 Edition of Arbitrary Waveform...............................................17 
9 Waveform Data Files..............................................................17 
 

Chapter 1 Introduction

1.1 Introduction

DDS-3005 USB Arbitrary Waveform Generator has one channel of

arbitrary waveform output, 8 Bits output, synchronized signal outputs, two

channels of Counter/Frequency Measurement inputs, 8 Bits input and external

trigger input. User can edit the waveform arbitrarily by the mouse or choose

the regular waveforms such as Sine, Square, Tri-angle, Saw-tooth, TTL, White

Noise, Gauss Noise, Trapezia, Exponent, AM and FM. The parameters, such

as amplitude, frequency and offset, are also settable. The data format of

DDS-3005 USB is completely compatible with that of Tektronix; it can

directly read the waveform data files produced by the Tektronix oscilloscope

or Tektronix waveform editor software and redisplay the waveform.

DDS-3005 USB adopts the DDS technology so that it has the advantages of

high frequency accuracy, high waveform resolution, high reliability, and wide

software support. It can be widely used in the various kinds of electronics labs

and it offers complete interface for second time development to be jointlessly

inserted into other auto-measuring systems.

1.2 Working Principle

The PC transfer the waveform data to the memorizer of the signal

generator via the USB bus, the ID counter cycles and send the period

waveform data to the DAC circuits, the DDS (Direct Digital Synthesized)

circuit produces the corresponding DAC refreshing clock. The waveform of

DAC is outputted through the Cache magnifier, Low Pass Filter, and the

Magnifier. The frequency counter can test the external frequency.

1.3 Hardware Specification

Waveform Output Channel

Frequency Range

0.1Hz(DC)~5MHz

Resolution

0.01Hz

DAC Clock

0~50MHz Continuously adjustable,

in step of 0.2Hz

Channels

1CH waveform output

Memory Depth

256KSa

Vertical Resolution

14 Bits

Stability

<30ppm

Amplitude

±10V Max.

Output Impedance

50 Ω

Output Current

50mA Vpeak=100mA

Low Pass Filter

5MHz, 1MHz, 100KHz, 10KHz,

1KHz Programmable Control

Harmonic Wave

distortion

-65dBc(1KHz), -53dBc(10KHz)

Frequency Counter Channel 1

Range

DC~25MHz

Input Amplitude

400mVpp~25Vpp

Coupling Mode

AC, DC Programmable

Accuracy

±Time Base Error ±1 Count

Input Impedance

> 50KΩ

Frequency Counter Channel 2

Range

25MHz~2.7GHz

Input Power

±20dbm

Coupling Mode

Accuracy

±Time Base Error ±1 Count

Input Impedance

50 Ω

Standard Frequency

25MHz

Frequency Stability

20 ppm max.

Aging Rate

±1 ppm/year

Digital Input and Output

Bits

8 Bits+ Synchronized Signal 1 Bit +

External Signal 1 Bit

Level

3/5V TTL/CMOS

Working Environment

Working

Temperature

0~70 Centigrade

Working Humidity

0~65%

Weight

0.7Kg

Chapter 2 Installation

2.1 System requirements

⚫Minimum System Requirements

Operating System

Windows 11/10/98/2000/XP

Memory

128Mbyte

Graphic Card

Microsoft DirectX supported

Screen resolution: 1024x768

Color depth: 16bit

⚫Recommended System Requirements

Operating System

Windows 11/10/98/2000/XP

Memory

256Mbyte

Graphic Card

Microsoft DirectX supported

Screen resolution: 1024x768

Color depth: 16bit

2.2 Shape and Terminal Illustration

DDS-3005 USB Shape

Arbitrary Waveform

output

25MHz~2.7GHz

counter/Frequency

Measurement

DC~25MHz

Counter/Frequency

Measurement

Front Panel

Rear Panel

PIN1

Bit7

PIN2

Bit6

PIN3

Bit5

PIN4

Bit4

PIN5

Bit3

PIN6

Bit2

PIN7

Bit1

PIN8

Bit0

PIN9

Synchronized Signal Output

PIN10

Digital Ground

Digital Output Port Definition

PIN1

Bit7

PIN2

Bit6

PIN3

Bit5

Digital outputs

Working Status

Indication

Digital inputs

PIN1

USB

PIN4

Bit4

PIN5

Bit3

PIN6

Bit2

PIN7

Bit1

PIN8

Bit0

PIN9

External Trigger Input

PIN10

Digital Ground

Digital Input Port Definition

Chapter 3 Software Operations

3.1 Installing the Hardware

Connect the USB instrument to the USB port through the USB cable, the PC

prompts that new USB device is found.

The PC will automatically find the new USB device and choose the

nominated directory to install the driver.

Choose the correct directory of the driver through the browser or search

Andere Handbücher für DDS-3005 USB

Inhaltsverzeichnis

Andere Hantek Prüfgeräte Handbücher

Hantek

Hantek DSO8072E Bedienungsanleitung

Hantek

Hantek DSO2000 Series Bedienungsanleitung

Hantek

Hantek HT824 Bedienungsanleitung

Hantek

Hantek DSO5000P Series Bedienungsanleitung

Hantek

Hantek IDSO Bedienungsanleitung

Hantek

Hantek DPO6000 Series Bedienungsanleitung

Hantek

Hantek DSO 1062B Bedienungsanleitung

Hantek

Hantek Hantek6022BL Bedienungsanleitung

Hantek

Hantek HT824 Gebrauchs- und Pflegehandbuch

Hantek

Hantek DPO7000 Series Bedienungsanleitung

Hantek

Hantek HT360 Series Bedienungsanleitung

Hantek

Hantek 6022BE Bedienungsanleitung

Hantek

Hantek 2D82Auto Bedienungsanleitung

Hantek

Hantek DSO5102P Bedienungsanleitung

Hantek

Hantek Q 0203A Bedienungsanleitung

Hantek

Hantek DSO-2150 USB Bedienungsanleitung

Hantek

Hantek 1008 Bedienungsanleitung

Hantek

Hantek 1008 Bedienungsanleitung

Hantek

Hantek Tablet1000 Series Bedienungsanleitung

Hantek

Hantek Tablet1000 Series Bedienungsanleitung

Hantek

Hantek HT2018B Bedienungsanleitung

Hantek

Hantek 1060 Bedienungsanleitung

Hantek

Hantek 6000EU Bedienungsanleitung

Hantek

Hantek DSO1000S Series Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung