Harbor Breeze 40680 Bedienungsanleitung

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m.,

EST, Friday.

ATTACH YOUR RECEIPT HERE

Purchase Date _________________________

Harbor Breeze® is a registered trademark

EB16198

Español p. 18

ITEM #0807431

BUILDER’S SERIES

CEILING FAN

MODEL #40680

TABLE OF CONTENTS

Package Contents .................................................................3

Hardware Contents ................................................................4

Safety Information .................................................................5

Preparation ......................................................................6

Initial Installation ..................................................................7

Wiring ..........................................................................9

Final Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Operating Instructions .............................................................13

Care and Maintenance ............................................................14

Troubleshooting..................................................................14

Limited Lifetime Warranty ..........................................................16

Replacement Parts List ............................................................17

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Upper Mounting Bracket 1

B Lower Mounting Bracket (preassembled to Motor [C]) 1

C Motor 1

D Switch Housing (preassembled to Motor [C]) 1

E Light Kit (preassembled to the Switch Housing [D]) 1

F Motor Housing 1

GBlade Arm 4

H Blade 4

I Glass Globe 1

J Bulb 1

K Lower Bracket Screw (preassembled to Lower Mounting Bracket [B]) 1

L Thumbscrew (preassembled to Light Kit [E]) 3

M Motor Screw (preassembled to Motor [C]) 8 + 1 extra

N Motor Housing Screw (preassembled to Upper Mounting Bracket [A]) 4

O Blade Balancing Kit 1

P Upper Bracket Screw (preassembled to Upper Mounting Bracket [A]) 2

G H I J

K L M N O P

HARDWARE CONTENTS (shown actual size)

Blade Screw

Qty. 12 + 1 extra

Blade Washer

Qty. 12 + 1 extra

Pull Chain Extension

Qty. 2

Wire Connector

Qty. 4

AA BB CC DD

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the

product.

• Before you begin installing the fan, disconnect the power by removing fuses or turning off the circuit

breakers.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

CodeandANSI/NFPA70-199.Hireaqualiedelectricianorconsultado-it-yourselfwiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to

theoorandatleast30in.fromtheendofthebladestoanyobstruction.

• The net weight of this fan is: 9.68 lbs.

DANGER: When using an existing outlet box, make sure the outlet box is securely attached to

the building structure and can support the full weight of the fan. Failure to do this can result in serious

injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan

after installation is complete.

WARNING: To avoid personal injury, the use of gloves may be necessary while handling fan

parts with sharp edges.

WARNING: Toreducetheriskofre,electricshockorpersonalinjury,mountthefantoanoulet

box marked “ACCEPTABLE FOR FAN SUPPORT” and use the mounting screws provided with the

outletbox.Mostoutletboxescommonlyusedforthesupportoflightingxturesarenotacceptable

forfansupportandmayneedtobereplaced.Consultaqualiedelectricianifindoubt.Securethe

outlet box directly to the building structure. The outlet box and its support must be able to support the

moving weight of the fan (at least 35 lbs.).

WARNING: Toreducetheriskofre,electricshockorpersonalinjury,wireconnectorsprovided

with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If

your house wire is larger than 12-gauge and/or there is more than one house wire to connect to the

two fan lead wires, consult an electrician for the proper size wire connectors to use.

WARNING: Toreducetheriskofreorelectricshock,donotusethefanwithanysolid-state

speed-control device or control the fan speed with a full-range dimmer switch.

WARNING: Toreducetheriskofre,electricshockorpersonalinjury,donotbendtheblade

arms when installing them, balancing the blades or cleaning the fan. Do not insert objects between

the rotating fan blades.

WARNING: TTo reduce the risk of personal injury, use only parts provided with this fan. The use

of parts OTHER than those provided with this fan will void the warranty.

SAFETY INFORMATION

CAUTION: Read all instructions and safety information before installing your new fan. Review the

accompanying assembly diagrams.

CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.

CAUTION: Carefully check all screws, bolts and nuts on the fan motor assembly to ensure they are

secured.

CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver

--Connect the equipment into and outlet on a circuit different from that to which the receiver is

connected.

--Consult the dealer or an experienced radio/TV technician for help.

Pleasenotechangesormodicationsnotexpresslyapprovedbythepartyresponsibleforcompliance

could void the user’s authority to operate the equipment.

PREPARATION

Before beginning the assembly of this product, ensure that all parts are present. Compare all parts

with the package contents list and hardware contents list. If any part is missing or damaged, do not

attempt to assemble the product.

After opening the top of the carton, remove the mounting hardware package from the foam inserts,

then remove the motor assembly from the packaging and place it on a soft surface, such as a carpet,

toavoiddamagetothenish.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Step Ladder, Wire Cutters and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure and Wiring Handbook

INITIAL INSTALLATION

1. Turn off the circuit breakers and the wall switch to the

fan supply line leads.

DANGER: Failure to disconnect the power

supply prior to installation may result in serious injury

or death.

2. This fan is intended for Flushmount installations.

Standard Mounting, Angled Mounting and Closemount

installations are not available.

Standard Mounting

Flushmount Closemount

Angle Mounting

3. Ensure the blades (H) will be at least 30 in. from

anyobstructionsandatleast7ft.abovetheoor.

7 ft. Min

30 in. Min

INITIAL INSTALLATION

4. Secure the upper mounting bracket (A) to the

outlet box (not included) using screws and washers

provided with the outlet box.

CAUTION: It is very important you use the proper

hardware when installing the upper mounting bracket

(A) as it will support the fan.

5. Remove the preassembled lower bracket screw (K)

from the lower mounting bracket (B) and the upper

bracket screws (P) from the upper mounting bracket

(A). Insert the tab of the lower mounting bracket (B)

into the slot in the upper mounting bracket (A).

6. Re-install the previously removed lower bracket screw

(K) and upper bracket screws (P) to secure the lower

mounting bracket (B) to the upper mounting bracket (A).

WIRING

WARNING:Toreducetheriskofre,electricalshockorpersonalinjury,wireconnectorsprovided

with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If

your house wire is larger than 12 gauges and/or there is more than one house wire to connect to the

two fan lead wires, consult an electrician for the proper size wire connectors to use.

CAUTION: Be sure the outlet box is properly grounded or that a Ground (Green or Bare) wire is present.

1. Connect household supply and fan wires according to

the diagram and these steps:

•ConnecttheGreenwirefromthefantotheBare/

Green supply wire.

•ConnecttheWhitewirefromthefantotheWhite

supply wire.

•ConnecttheBlackandBluewiresfromthefantothe

Black supply wire.

•Secureallwiringconnectionstogetherwithwire

connectors (DD).

Note: If there is a second hot/power wire coming from

the outlet box, connect it to the blue (light power) fan

wire for separate light and fan control.

Note: The Black wire is hot power for the fan. The

White wire is common for the fan and light kit. The

Blue wire is hot power for light. The Green wire is the

ground wire. If household supply wires are different

colors than referred to above, it is recommended a

professional electrician determines the proper wiring.

Hardware Used

DD Wire Connector x 3

2. Wrap electrical tape (not included) around each

individual wire connector (DD) down to the wire.

3. Turn the spliced/taped wires upward and gently push

the wires and wire connectors (DD) into the outlet box.

WARNING: Ensure no bare wire or wire strands

are visible after making connections. Place the Green

and White wire connections on the opposite side of the

outlet box from the Black and Blue wire connections.

Black (Hot)

White (Neutral)

Bare/Green (Ground)

Black

Blue

White

Green

FINAL INSTALLATION

1. Temporarily lift the motor housing (F) to the upper

mounting bracket (A) to determine which two motor

housing screws (N) preassembled in the sides of

the upper mounting bracket (A) align with the slotted

holes in the top edge of the motor housing (F).

Partially loosen the two motor housing screws (N) that

align with the slotted holes.

Remove the other two motor housing screws (N) from

the upper mounting bracket (A).

2. Slide the motor housing (F) over the motor (C),

aligning the slotted holes in the motor housing (F) with

the loosened motor housing screws (N) in the upper

mounting bracket (A). Twist the motor housing (F) to

lock, then re-insert the two previously removed motor

housing screws (N) and securely tighten all screws.

3. Partially insert the blade screws (AA) along with the

blade washers (BB) through the blade (H) and into the

blade arm (G). Tighten each blade screw (AA) with a

Phillips screwdriver (not included), starting with the

one in the middle. Repeat this step for the remaining

blades (H) and blade arms (G).

Hardware Used

AA Blade Screw x 12

Blade Washer x 12

3AA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze LYNSTEAD Bedienungsanleitung

Harbor Breeze

Harbor Breeze 856 Bedienungsanleitung

Harbor Breeze

Harbor Breeze TG44BNK3D1RC Bedienungsanleitung

Harbor Breeze

Harbor Breeze E-WCK44ABZ5LKS Bedienungsanleitung

Harbor Breeze

Harbor Breeze TG52BNK3D1RC Bedienungsanleitung

Harbor Breeze

Harbor Breeze COGDELL COG60BNK7LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze EXOCET 40764 Bedienungsanleitung

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Bedienungsanleitung

Harbor Breeze

Harbor Breeze 41169 Bedienungsanleitung

Harbor Breeze

Harbor Breeze SOUTHLAKE LP8055LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze LAKE LAGODA LP8300LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze BELCARRA CE-JP13BNK6RC Bedienungsanleitung

Harbor Breeze

Harbor Breeze TALAMORE TAL60BNK8LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze POINT BREAK Merkblatt

Harbor Breeze

Harbor Breeze AERO CEILING FAN E-AER52BRZ5LKRCI Bedienungsanleitung

Harbor Breeze

Harbor Breeze BTH44ABZC5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40094 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 42079 Bedienungsanleitung

Harbor Breeze

Harbor Breeze L0982 Bedienungsanleitung

Harbor Breeze

Harbor Breeze PORTES LP8293LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze E-WCK44ABZ5LKS Bedienungsanleitung

Harbor Breeze

Harbor Breeze LAKE PLACIDO CPK1261 Bedienungsanleitung

Harbor Breeze

Harbor Breeze ANIVA BAY Bedienungsanleitung

Harbor Breeze

Harbor Breeze BEACH CREEK TG44LW3D1RC Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung