Harbor Breeze ANIVA BAY Bedienungsanleitung

Español p. 19

ITEM #0593755

MODEL #LP8321LAZ

ANIVA BAY CEILING FAN

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

Lowes.com/harborbreeze

Harbor Breeze® is a registered trademark

EB14225

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday and

8 a.m. - 5 p.m., EST, Friday.

TABLE OF CONTENTS

3DFNDJH&RQWHQWV

Hardware Contents .......................................................................................................................

Safety Information .........................................................................................................................

3UHSDUDWLRQ

Assembly Instructions ...................................................................................................................

Wiring Instructions ........................................................................................................................

Final Assembly Instructions ..........................................................................................................

Operating Instructions ..................................................................................................................

Care and Maintenance .................................................................................................................

Troubleshooting ............................................................................................................................

Warranty .......................................................................................................................................

5HSODFHPHQW3DUWV/LVW

/RZHVFRPKDUERUEUHH]H

PACKAGE CONTENTS

Lowes.com/harborbreeze

YTITNAUQNOITPIRCSEDTRAPA

Motor Assembly

Hanger Bracket

Downrod Assembly

Ceiling Canopy

Canopy Screw Cover

Motor Coupling Cover

Blade Plate Assembly

End Cap

YTITNAUQNOITPIRCSEDTRAP I

Blade Cover

(preassembled to Motor

Assembly (A))

Blade

Remote Pack

Receiver Unit

(preassembled to Motor

Assembly (A))

HARDWARE CONTENTS (shown actual size)

Wire

Connector

Qty.

3 + 1 extra

Lowes.com/harborbreeze

Fiber

Washer

Qty.

9 + 1 extra

SAFETY INFORMATION

Before you begin installing the fan, disconnect the power by removing fuses or turning off circuit

breakers.

'RQRWLQVWDOORUXVHIDQLIDQ\SDUWLVGDPDJHGRUPLVVLQJ

Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades

to the floor and at least 30 in. from the ends of the blades to any obstruction.

If you are mounting the fan to a ceiling outlet box, use a METAL octagonal outlet box, not plastic.

Secure the outlet box directly to the building structure. The outlet box and its support must be able

to support the moving weight of the fan (at least 35 lbs.).

To reduce the risk of fire, electrical shock, or personal injury, wire connectors provided with this

fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If

your house wire is larger than 12-gauge or there is more than one house wire to connect to the

two fan lead wires, consult an electrician for the proper size wire connectors to use. Before

cutting, drilling or hammering, verify their location. If needed, contact your electrician, plumber

or service person.

To reduce the risk of fire, electric shock or personal injury, do not bend the blade arms when

LQVWDOOLQJWKHPEDODQFLQJWKHEODGHVRUFOHDQLQJWKHIDQ'RQRWLQVHUWIRUHLJQREMHFWVEHWZHHQ

the rotating fan blades. Mount to outlet box marked “ACCEPTABLE FOR FAN SUPPORT” and

use mounting screws provided with the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

7KLVIDQLVWREHXVHGLQGU\RUGDPSORFDWLRQV

'RQRWRSHUDWHWKLVIDQZLWKDYDULDEOH5KHRVWDWZDOOFRQWUROOHURUGLPPHUVZLWFK'RLQJVR

could result in damage to the ceiling fan's remote control unit.

WARNING

Please read and understand this entire manual before attempting to assemble, operate or install

the product.

Screw

Qty.

9 + 1 extra

SAFETY INFORMATION

Note: This equipment has been tested and found to comply with the limits for Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

The net weight of this fan is: 19.02 lbs.

Make sure all electrical connections comply with local codes, ordinances or the National

Electrical code. Hire a qualified electrician or consult a do-it-yourself wiring handbook if you are

unfamiliar with installing electrical wiring.

After you install the fan, make sure all connections are secure to prevent the fan from falling.

For supply connections, if the conductor of a fan is identified as a grounded conductor, then it

should be connected to a grounded conductor power supply. If the conductor of a fan is identified

as an ungrounded conductor, then it should be connected to an ungrounded conductor power

supply. If the conductor of a fan is identified for equipment grounding, then it should be connected

to an equipment-grounding conductor.

CAUTION

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and hardware contents list. If any part is missing or damaged, do not attempt

to assemble the product.

Estimated Assembly Time: 60 minutes

Tools Required for Assembly (not included):

stripper and step ladder.

Helpful Tools (not included): AC tester light, do-it-yourself wiring handbook and wire cutters.

This fan is intended for standard and angled mounting options only. Closemount and flushmount

options are not available. For angled ceilings, note the angle can be no more than 19°.

PREPARATION

ASSEMBLY INSTRUCTIONS

/RZHVFRPKDUERUEUHH]H

2. Remove the hanger ball portion from the

downrod assembly (C) by loosening the

preassembled set screw in the hanger ball until

the ball falls freely down the downrod. Remove

the preassembled pin from the downrod, then

remove the hanger ball. Retain the pin and

hanger ball for later use.

1. Remove the preassembled hairpin clip and

clevis pin from the bottom of downrod assembly

(C). Retain pin and clip for later use.

Note: Make sure to keep loose hardware

separate to avoid confusion during installation.

/RRVHQWKHWZRSUHDVVHPEOHGVHWVFUHZVLQ

the downrod support of the motor assembly

(A). Retain the set screws for later use. Then,

route the black, white and blue wires from the

motor assembly (A) through the downrod.

Note: Make sure to keep loose hardware

separate to avoid confusion during installation.

Set screw

ASSEMBLY INSTRUCTIONS

/RZHVFRPKDUERUEUHH]H

4. Thread the downrod into the downrod support

of the motor assembly (A). Align the holes in

the downrod support with the holes in the

downrod and re-install the previously removed

clevis pin (Step 1, page 6). Secure clevis pin

with previously removed hairpin clip (Step 1,

page 6). Then, re-install the previously

removed set screws (step 3, page 6) into the

downrod support.

5. Route motor coupling cover (F), canopy screw

cover (E) and ceiling canopy (D) over fixture

wires from motor assembly (A).

WARNING

It is critical the clevis pin in the downrod support

is properly installed and the set screws are

securely tightened. Failure to do so could result

in the fan falling and causing injury.

6. Re-attach the pin previously removed (Step 2,

page 6) into the downrod, then align the

hanger ball so the pin is captured in the

JURRYHDWWKHWRS3XOOWKHKDQJHUEDOOWLJKW

against the pin, then tighten the preassembled

set screw in hanger ball.

A loose set screw could result in a wobbly fan.

CAUTION

Set screw

WARNING

To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before

hanging.

WARNING

The fan must hang with at least 7 ft. of clearance from the floor to blades.

8. Securely attach the hanger bracket (B) to the

outlet box (not included) using the outlet box

screws and washers supplied with the outlet

box.

ASSEMBLY INSTRUCTIONS

/RZHVFRPKDUERUEUHH]H

7. Measure approximately 6 to 9 in. of lead wire

from the top of the downrod assembly (C),

WKHQFXWRIIWKHH[FHVV6WULSLQVXODWLRQRII

in. from the end of each lead wire.

Note: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice.

WARNING

The outlet box must be securely anchored.

Hanger bracket (B) must seat firmly against

outlet box. If the outlet box is recessed, remove

wallboard until hanger bracket (B) contacts box.

,IKDQJHUEUDFNHW%DQGRURXWOHWER[DUHQRW

securely attached, the fan could wobble or fall.

ASSEMBLY INSTRUCTIONS

/RZHVFRPKDUERUEUHH]H

9. Carefully lift the fan assembly, resting the

hanger ball of the downrod assembly (C) on

the hanger bracket (B).

Note: Be sure the groove in the hanger ball

is lined up with tab on the hanger bracket (B).

WARNING

Failure to seat tab in groove could cause damage

to electrical wires and possible shock or fire

hazard.

To avoid possible shock, do not pinch wires

between the downrod assembly (C) and hanger

bracket (B).

/RZHVFRPKDUERUEUHH]H

WIRING INSTRUCTIONS

1. Connect the green grounding wire from the

downrod assembly (C) and the green grounding

wire from the hanger bracket (B) to the supply

grounding conductor (this may be a bare wire or

wire with green colored insulation). Securely

connect wires with wire connector (CC).

Securely connect the white fan motor wire to the

white supply (neutral) wire using wire connector

(CC). Securely connect the black fan motor wire

to the black supply wire using wire connector

(CC).

Hardware Used

CC x 3

Wire

Connector

Green Wire

from Supply

(Ground)

White Wire

from Supply

White Wire

from Fan

Green Wire

from Downrod

Assembly

(Ground)

Green

Wire

White

Wire

Green Wire

from Hanger

Ball (Ground)

/LVWHG

Outlet Box

Household

Supply

Black Wire

from Supply

Black Wire

from Fan

Black Wire

2. After connections have been made, turn wires

upward and carefully push wires into the outlet

box, with the white and green wires to one side

of the box and the black wires toward the

other side.

To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring

this fan.

WARNING

Note: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice.

WARNING

Check to see all connections are tight and no

bare wire is visible at the wire connectors

except for the ground wire.

Inhaltsverzeichnis

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze 41239 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CALERA CLRO52-II Bedienungsanleitung

Harbor Breeze

Harbor Breeze TEX52MBK5C1L Bedienungsanleitung

Harbor Breeze

Harbor Breeze 41182 Bedienungsanleitung

Harbor Breeze

Harbor Breeze E-ER56ORB3LKLR Bedienungsanleitung

Harbor Breeze

Harbor Breeze TALAMORE TAL60BNK8LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze 872 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CUMBERLAND 42476 Bedienungsanleitung

Harbor Breeze

Harbor Breeze EDENTON L2B1 Bedienungsanleitung

Harbor Breeze

Harbor Breeze JP18EB3 Bedienungsanleitung

Harbor Breeze

Harbor Breeze FLANAGAN Bedienungsanleitung

Harbor Breeze

Harbor Breeze BTH44ABZC5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze RLG52NWZ5C3L Handbuch

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Bedienungsanleitung

Harbor Breeze

Harbor Breeze SARATOGA 00798 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 41161 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40045 Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAYFIELD BTH44AB5CS Bedienungsanleitung

Harbor Breeze

Harbor Breeze BDB52BNK5L Bedienungsanleitung

Harbor Breeze

Harbor Breeze L1901 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 00728 Bedienungsanleitung

Harbor Breeze

Harbor Breeze TILGHMAN WCK52LMW5N Bedienungsanleitung

Harbor Breeze

Harbor Breeze HTE21091 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CHESHIRE II CSD52BB5C4 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung