Harbor Breeze 40959 Bedienungsanleitung
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m.,
EST, Friday.
1
Harbor Breeze® is a registered trademark
of LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Serial Number _________________________ Purchase Date _________________________
Español p. 20
EB1690
ITEM #0803775, 0721899, 0807427
PAWTUCKET CEILING FAN
MODEL #40958, 40959, 40047
2
TABLE OF CONTENTS
Package Contents .................................................................3
Hardware Contents ................................................................4
Safety Information .................................................................5
Preparation ......................................................................6
Initial Installation ..................................................................7
Fan Wiring .....................................................................10
Final Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Operating Instructions .............................................................15
Care and Maintenance ............................................................16
Troubleshooting..................................................................16
Limited Lifetime Warranty ..........................................................18
Replacement Parts List ............................................................19
3
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Motor Housing 1
B Upper Mounting Bracket 1
C Receiver (preassembled to Upper Mounting Bracket [B]) 1
D Lower Mounting Bracket (preassembled to Motor [E]) 1
E Motor 1
F Switch Housing (preassembled to Motor [E]) 1
G Switch Housing Cap (preassembled to Light Kit [H]) 1
H Light Kit 1
I Finial Cap (preassembled to Light Kit [H]) 1
J Finial (preassembled to Light Kit [H]) 1
K Glass Shade 1
LBlade Arm 5
M Blade 5
N Bulb 2
O Remote Pack 1
P Large Washer (preassembled to Light Kit [H]) 1
Q Hex Nut (preassembled to Light Kit [H]) 1
R Mounting Bracket Screw (preassembled to Lower Mounting Bracket [D]) 4
S Switch Housing Screw (preassembled to Switch Housing Cap [G]) 3
T Motor Housing Screw (preassembled to Upper Mounting Bracket [B]) 4
U Blade Balancing Kit 1
V Motor Screw (preassembled to Motor [E]) 10 + 1 extra
W Spring Washer (preassembled to Lower Mounting Bracket [D]) 4
A
B
D
C
E
J
I
H
G
F
KL
MNO
P Q R S T U V W
4
HARDWARE CONTENTS (shown actual size)
Plug Button
Qty. 1
Blade Screw
Qty. 15
+ 1 extra
Blade Washer
Qty. 15
+ 1 extra
Wire Connector
Qty. 2
AA BB CC DD
5
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
• Beforeyoubegininstallingthefan,disconnectthepowerbyremovingfusesorturningothecircuit
breakers.
• Make sure all electrical connections comply with local codes, ordinances, the National Electrical
CodeandANSI/NFPA70-199.Hireaqualiedelectricianorconsultado-it-yourselfwiring
handbook if you are unfamiliar with installing electrical wiring.
• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to
theoorandatleast30in.fromtheendofthebladestoanyobstruction.
• The net weight of this fan is: 14.55 lbs.
DANGER: When using an existing outlet box, make sure the outlet box is securely attached to
the building structure and can support the full weight of the fan. Failure to do this can result in serious
injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan
after installation is complete.
WARNING: To avoid personal injury, the use of gloves may be necessary while handling fan
parts with sharp edges.
WARNING: Using a full-range dimmer switch to control fan speed will cause a loud humming
noisefromthefan.Toreducetheriskofreorelectricshock,doNOTuseafull-rangedimmerswitch
to control the fan speed.
WARNING: Toreducetheriskofre,electricshockorpersonalinjury,mountthefantoan
outlet box marked “ACCEPTABLE FOR FAN SUPPORT” and use the mounting screws provided with
theoutletbox.Mostoutletboxescommonlyusedforthesupportoflightingxturesarenotacceptable
forfansupportandmayneedtobereplaced.Consultaqualiedelectricianifindoubt.Securethe
outlet box directly to the building structure. The outlet box and its support must be able to support the
moving weight of the fan (at least 35 lbs.).
WARNING: Toreducetheriskofre,electricalshockorpersonalinjury,wireconnectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12-gauge and there is more than one house wire to connect
to the two fan lead wires, consult an electrician for the proper size wire connectors to use.
WARNING: Toreducetheriskofre,electricshockorpersonalinjury,donotbendtheblade
arms when installing them, balancing the blades or cleaning the fan. Do not insert objects between
the rotating fan blades.
WARNING: To reduce the risk of personal injury, use only parts provided with this fan. The use
of parts OTHER than those provided with this fan will void the warranty.
6
SAFETY INFORMATION
CAUTION: Read all instructions and safety information before installing your new fan. Review the
accompanying assembly diagrams.
CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.
CAUTION: Carefully check all screws, bolts and nuts on the fan motor assembly to ensure they are
secured.
CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and , if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipmentoandon.Theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver
--Connecttheequipmentintoandoutletonacircuitdierentfromthattowhichthereceiveris
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Pleasenotechangesormodicationsnotexpresslyapprovedbythepartyresponsibleforcompliance
could void the user’s authority to operate the equipme
PREPARATION
Before beginning the assembly of this product, ensure all parts are present. Compare all parts with
the package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 120 minutes
Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety
Glasses, Step Ladder, Wire Cutters and Wire Strippers
Helpful Tools (not included): AC Tester Light, Tape Measure and Wiring Handbook
7
INITIAL INSTALLATION
1. Turnothecircuitbreakersandthewallswitchtothe
fan supply line leads.
DANGER: Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
2. Ensure the blades (M) will be at least 30 in. from any
obstructionsandwillbeatleast7ft.abovetheoor.
7 ft. Min
30 in. Min
3. Secure the upper mounting bracket (B) to the
outlet box (not included) using screws and washers
provided with the outlet box.
CAUTION: It is very important that you use the proper
hardware when installing the upper mounting bracket
(B) as it will support the fan.
2
B
Outlet Box
M
3
1
8
INITIAL INSTALLATION
WARNING:Toreducetheriskofre,electricalshockorpersonalinjury,wireconnectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires
from the fan. If your house wire is larger than 12-gauge and/or there is more than one house wire to
connect to the two fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.
4. Using wire connectors (DD), connect wires from
receiver (C) -- preassembled to upper mounting bracket
(B) -- and house supply wires according to the diagram
and these steps:
• Connect the red wire from receiver (C) to the black
(hot) house supply wire.
• Connect the white wire with red label from the receiver
(C) to the white (neutral) house supply wire.
Note: The remaining wires will be connected later in the
installation process (page 10).
Hardware Used
DD Wire Connector x 2
5. Wrap electrical tape (not included) around each
individual wire connector (DD) down to the wire.
6. Turn the spliced/taped wires upward and gently push
the wires and wire connectors (DD) into the outlet box.
WARNING: Ensure no bare wire or wire strands are
visible after making connections.
4
5
DD
6
DD
DD
C
B
9
INITIAL INSTALLATION
7. Remove the mounting bracket screws (R) and spring
washers (W) from underneath the lower mounting
bracket (D). Also remove the motor screws (V) from the
bottom of the motor (E). Retain for later use.
Note: Make sure to keep loose hardware separate to
avoid confusion during installation.
8. Place one tab of the lower mounting bracket (D) into a
slot in the upper mounting bracket (B). Then slide the
second tab of the lower mounting bracket (D) into the
second slot on the upper mounting bracket (B) until all
four holes are in alignment.
9. Re-install the previously removed mounting bracket
screws (R) and spring washers (W) to secure the
lower mounting bracket (D) and the upper mounting
bracket (B).
5
6
9
8
7
R
W
V
E
D
R
B
D
B
B
D
Tab
Tab
Slot
D
10
FAN WIRING
WARNING:Toreducetheriskofre,electricalshockorpersonalinjury,wireconnectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12-gauge and there is more than one house wire to connect
to the two fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.
1. Connect the remaining wires from the receiver (C), fan
and house supply according to the diagram and these
steps:
•Connectthegreenwirefromthefantothebare/
green (ground) house supply wire using a wire
connector from remote pack (O).
•Connectthewireharnessfromthereceiver(C)to
the wire harness from the fan.
Note: The green wire is the ground. If house wires
aredierentcolorsthanreferredtoabove,itis
recommended a professional electrician determines
the proper wiring.
2. Wrap electrical tape around each individual wire
connector from remote pack (O), down to the wire.
3. Turn the spliced/taped wires upward and gently push
the wires and wire connectors into the outlet box. Then
insert the connected wire harnesses in the space
between the upper mounting bracket and the lower
mounting bracket.
WARNING: Ensure no bare wire or wire strands are
visible after making connections. Place the green and
white wire connections on the opposite side of the
outlet box from the black.
1
C
2
Wire
Connector
3
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Harbor Breeze Lüfter Handbücher
Harbor Breeze
Harbor Breeze E-ER56ORB3LKLR Bedienungsanleitung
Harbor Breeze
Harbor Breeze BATTLER E-LUK52HBB5LEDR Bedienungsanleitung
Harbor Breeze
Harbor Breeze BOLTZ 42300 Bedienungsanleitung
Harbor Breeze
Harbor Breeze 856 Bedienungsanleitung
Harbor Breeze
Harbor Breeze AERO 00980 Bedienungsanleitung
Harbor Breeze
Harbor Breeze 40678 Bedienungsanleitung
Harbor Breeze
Harbor Breeze FREEPORT LP8079LAZ Bedienungsanleitung
Harbor Breeze
Harbor Breeze RLG52NWZ5C3L Handbuch
Harbor Breeze
Harbor Breeze QUONTA CFH52BNK5L Bedienungsanleitung
Harbor Breeze
Harbor Breeze C-UT56TBC3M Bedienungsanleitung
Harbor Breeze
Harbor Breeze AERO CEILING FAN E-AER52BRZ5LKRCI Bedienungsanleitung
Harbor Breeze
Harbor Breeze 40662 Bedienungsanleitung
Harbor Breeze
Harbor Breeze 40945 Bedienungsanleitung
Harbor Breeze
Harbor Breeze KITSILANO Bedienungsanleitung
Harbor Breeze
Harbor Breeze LAKE PLACIDO CPK1261 Bedienungsanleitung
Harbor Breeze
Harbor Breeze BELLHAVEN II E-BLHII52VPW5C4S Bedienungsanleitung
Harbor Breeze
Harbor Breeze OCEANSIDE Bedienungsanleitung
Harbor Breeze
Harbor Breeze VALDOSTA L1120H-BK Bedienungsanleitung
Harbor Breeze
Harbor Breeze TOWNSEND LP8018LAZ Bedienungsanleitung
Harbor Breeze
Harbor Breeze Bath Ventilator with Light Bedienungsanleitung
