Harbor Breeze ARMITAGE CC52WW5C Bedienungsanleitung

ITEM #0020776

ARMITAGE CEILING FAN

MODEL #CC52WW5C

Harbor Breeze® is a registered trademark of

Español p. 18

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

Lowes.com/harborbreeze

EB15412

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -

5 p.m., EST, Friday.

4010239

TABLE OF CONTENTS

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, install or operate the

product.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

repairs, it must be shipped in its original packaging to ensure proper protection against damage that

might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring

handbook, available at Lowe's, if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the

floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan including the light kit is: 14.11 lbs.

Lowes.com/harborbreeze

Safety Information ...............................................................................................................2

Package Contents ...............................................................................................................4

Hardware Contents

..........................................................................................................................

Preparation ..........................................................................................................................5

Initial Installation ..................................................................................................................6

Wiring ..................................................................................................................................8

Final Installation ................................................................................................................10

Operating Instructions .......................................................................................................12

Care and Maintenance ......................................................................................................14

Troubleshooting..................................................................................................................15

Limited Lifetime Warranty ..................................................................................................16

Replacement Parts List .....................................................................................................17

3Lowes.com/harborbreeze

SAFETY INFORMATION

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box

marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. (15.9 KG) OR LESS" and use

mounting screws provided with the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a

plastic outlet box. Secure the outlet box directly to the building structure. The outlet box and its

support must be able to support the moving weight of the fan (at least 35 lbs.).

To avoid personal injury, the use of gloves may be necessary while handling fan parts with

sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan

are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more than one house wire to connect to the

corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control

device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, do not bend the blade arms when

installing them, balancing the blades or cleaning the fan. Do not insert objects between the

rotating fan blades.

To reduce the risk of personal injury, use ONLY parts provided with this fan. The use of parts

OTHER than those provided with this fan will void the warranty.

Before installation, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

WARNING

DANGER

CAUTION

When using an existing outlet box, make sure the outlet box is securely attached to the building

structure and can support the full weight of the fan. Failure to do this can result in serious injury or

death. The stability of the outlet box is essential in minimizing wobble and noise in the fan after

installation is complete.

Be sure outlet box is properly grounded and that a ground wire (green or bare) is present.

Before beginning installation, carefully check all screws, bolts and nuts on fan motor assembly to

ensure they are secure.

PACKAGE CONTENTS

Lowes.com/harborbreeze

IMPORTANT REMINDER: You must use the

parts provided with this fan for proper installation

and safety.

Mounting Bracket 1

Shade Fitter Plate

Motor Housing

D Motor Assembly 1

Glass Shade

Blade Arm

Blade 5

Pull Chain Extension

Bulb

Mounting Bracket Flat 4

Washer (preassembled)

DESCRIPTIONPART QUANTITY

Mounting Bracket Nut 4

(preassembled)

Lock Washer 10

(preassembled) + 1 extra

M Motor Screw

(preassembled) + 1 extra

N Motor Housing Mounting 4

Screw (preassembled)

Motor Housing Lock

Washer

(preassembled)

Shade Fitter Plate Screw

(preassembled)

Shade Fitter Plate Washer

(preassembled)

DESCRIPTIONPART QUANTITY

HARDWARE CONTENTS (shown actual size)

Fiber

Blade

Washer

Qty. 15

BB CC

Blade

Screw

Qty. 15 E3 Wire

Connector

Qty. 4

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Stepladder and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself-Wiring Handbook and

Wire Cutters

PREPARATION

Lowes.com/harborbreeze

+ 1 extra + 1 extra

INITIAL INSTALLATION

Remove all mounting bracket nuts (K) and

mounting bracket flat washers (J) from mounting

bracket (A).

Turn off circuit breakers and wall switch to the fan

supply line leads.

DANGER: Failure to disconnect power supply

prior to installation may result in serious injury or

death.

OFF

This fan can be mounted as a flushmount on a

regular (no-slope) ceiling only.

Check to make sure blades (G) will be at least

30 inches from any obstruction and at least 7 ft.

above the floor.

Lowes.com/harborbreeze

7 ft.

min.

30 in.

min.

Slide the slot in the bar at the top of the motor

assembly (D) onto the "J" hook on the mounting

bracket (A) to support the fan during wiring.

IMPORTANT: Do not use the end of the bar on

the motor assembly (D) with the small round hole

to hang the motor assembly (D) on the mounting

bracket (A).

Remove motor screws (M) and lock washers

(L) from underside of motor -- save motor

screws (M) and lock washers (L) to attach

blade arms (F) later on. If there are also

plastic motor blocks, discard them at this

time. Motor

"J" Hook

Bar

INITIAL INSTALLATION

Lowes.com/harborbreeze

Secure mounting bracket (A) to outlet box using

screws, spring washers, and flat washers

provided with the outlet box.

*Note: It is very important that you use the

proper hardware when installing the mounting

bracket (A) as this will support the fan.

WIRING

1b. FAN CONTROLLED BY PULL CHAIN, LIGHT

BY WALL SWITCH: If you intend to control the fan

light with a separate wall switch, connect BLACK

wire from fan to BLACK wire from ceiling. Connect

BLUE wire from fan to the BLACK wire from the

independent wall switch for the light. Connect

WHITE wire from fan to WHITE wire from ceiling.

Connect all GROUND (GREEN) wires together

from fan (on motor assembly (D) and mounting

bracket (A)) to BARE/GREEN wire from ceiling.

(Fig. 1B)

Lowes.com/harborbreeze

WARNING: To reduce the risk of fire, electrical shock, or personal injury, wire connectors

provided with this fan are designed to accept only one 12-gauge house wire and two lead wires

from the fan. If your house wire is larger than 12-gauge or there is more than one house wire to

connect to the corresponding fan lead wires, consult an electrician for the proper size wire

connectors to use.

CAUTION: Be sure outlet box is properly grounded and that a ground (green or bare) wire is

present.

WARNING: If house wires are different colors than referred to in the following steps, stop

immediately. A professional electrician is recommended to determine wiring.

Choose wiring diagram (Fig. 1a, Fig. 1b or Fig. 1c)

that fits your situation and make appropriate wiring

connections as follows: [IMPORTANT: For each

wire connection below, use one of the wire

connectors (CC) provided, making sure to screw

wire connector (CC) on in a clockwise direction.]

1a. FAN AND LIGHT CONTROLLED BY PULL

CHAINS: Connect BLACK and BLUE wire from

fan to BLACK wire from ceiling. Connect WHITE

wire from fan to WHITE wire from ceiling. Connect

all GROUND (GREEN) wires together from fan

(on motor assembly (D) and mounting bracket (A))

to BARE/GREEN wire from ceiling. (Fig. 1A)

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

FAN CONTROLLED BY PULL CHAIN, LIGHT BY WALL SWITCH

GROUND/GREEN (BARE)

WHITE

BLACK

WHITE

D/G

REEN

(

BARE

)

GROUND/GREEN

BLACK

WHITE

BLUE

FROM FAN

BLACK

BLUE

WHITE

M FA

WHITE

D/GREE

D/G

HITE

BLACK

120 V Power

from ceiling

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

FAN AND LIGHT CONTROLLED BY PULL CHAINS

GROUND/GREEN (BARE)

WHITE

BLACK

120 V Power

from ceiling

BLAC

WHITE

D/G

REEN

(

BARE

)

GROUND/GREEN

BLACK

WHITE

BLUE

FROM FAN

BLACK

WHITE

M FA

WHITE

D/G

WHITE

BLACK

BLACK (WALL SWITCH)

WIRING

Wrap electrical tape around each individual wire

connector (CC) down to the wire.

WARNING: Make sure no bare wire or wire

strands are visible after making connections. Place

green and white connections on opposite side of box

from the black and blue (if applicable) connections.

Turn spliced/taped wires upward and gently push

wires and wire connectors (CC) into outlet box.

IMPORTANT: Using a full range dimmer switch to

control fan speed will cause a loud humming noise

from fan. To reduce the risk of fire or electrical

shock, do NOT use a full range dimmer switch to

control fan speed.

Lowes.com/harborbreeze

1c. FAN AND LIGHT CONTROLLED BY TWO

WALL SWITCHES: If you intend to control the

fan and light with separate wall switches,

connect BLACK wire from fan to BLACK wire

from the independent wall switch for the fan.

Connect BLUE wire from fan to the BLACK wire

from the other independent wall switch for the

light. Connect WHITE wire from fan to WHITE

wire from ceiling. Connect all GROUND (GREEN)

wires together from fan (on motor assembly and

mounting bracket) to BARE/GREEN wire from

ceiling. (Fig. 1C)

Note: BLACK wire is hot power for fan. BLUE wire

is hot power for light kit. WHITE wire is common

for fan and light kit. BARE/GREEN wire is ground.

E3 Wire Connector x 4

Hardware Used

Dimmer

Switch Speed

Switch

For illustrative purposes only--not

intended to cover all types of controls

WHITE

D/GREEN

BLACK

WHITE

BLUE

FROM FAN

BLACK

WHITE

M FA

WHITE

REE

D/G

WHITE

BLACK

BLACK (WALL SWITCH FOR LIGHT)

BLACK (WALL SWITCH)

GROUND/GREEN (BARE)

120 V Power

from ceiling

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

Temporarily lift motor housing (C) to mounting

bracket (A) to determine which two motor housing

mounting screws (N) in sides of mounting bracket

(A) align with the slotted holes in the top edge of

the motor housing (C) and partially loosen these

two motor housing mounting screws (N). Remove

the other two motor housing mounting screws (N)

and motor housing lock washers (O) from sides of

mounting bracket (A). Slide motor housing (C) over

motor assembly (D), aligning slotted holes in motor

housing (C) with loosened motor housing mounting

screws (N) in mounting bracket (A). Twist motor

housing (C) to lock. Re-insert the other two motor

housing mounting screws (N), along with motor

housing lock washers (O), to secure motor housing

(C). Tighten all motor housing mounting screws (N)

securely.

FINAL INSTALLATION

Partially insert three blade screws (AA) along with

three fiber blade washers (BB) into holes on

blade arm (F) and blade (G) to attach blade arm

(F) to blade (G). Then, tighten each blade screw

(AA) starting with the one in the middle. Repeat

with remaining blades (G).

Remove motor assembly (D) from "J" hook and lift

motor assembly (D) to mounting bracket (A). Align

holes and secure motor assembly (D) with mounting

bracket flat washers (J) and mounting bracket nuts

(K) previously removed (Step 3, page 6).

Lowes.com/harborbreeze

AA Blade Screw x 15

Fiber Blade Washer x 15

Hardware Used

Inhaltsverzeichnis

Sprachen:

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze CLASSIC STYLE BDB52LW5N Bedienungsanleitung

Harbor Breeze

Harbor Breeze Crosswinds II 40821 Bedienungsanleitung

Harbor Breeze

Harbor Breeze FREEPORT LP8079LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze MERRIMACK 40942 Handbuch

Harbor Breeze

Harbor Breeze C-UT56TBC3M Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40045 Bedienungsanleitung

Harbor Breeze

Harbor Breeze LAKE LAGODA LP8300LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze URBANIA E-AR54BNK5C1 Bedienungsanleitung

Harbor Breeze

Harbor Breeze Cape Coast E-YLM52WW5C1 Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAZON MZ44BNK3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze EXOCET 40764 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 00881 Bedienungsanleitung

Harbor Breeze

Harbor Breeze PACIFIC GROVE 40101 Bedienungsanleitung

Harbor Breeze

Harbor Breeze BTH44ABZC5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze 00892 Bedienungsanleitung

Harbor Breeze

Harbor Breeze BDB52ABZC5P Bedienungsanleitung

Harbor Breeze

Harbor Breeze 41239 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40678 Bedienungsanleitung

Harbor Breeze

Harbor Breeze Santa Ana LP8294LBN Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40105 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CALERA CLRO52-II Bedienungsanleitung

Harbor Breeze

Harbor Breeze C-TMH44CH5D1R Bedienungsanleitung

Harbor Breeze

Harbor Breeze SOUTHLAKE LP8055LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze COGDELL COG60BNK7LR Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung