Harbor Breeze CLASSIC STYLE BDB52LW5N Bedienungsanleitung

ITEM #0076888

0077285

0079837

0080297

CLASSIC STYLE CEILING FAN

Español p. 18

MODEL #BDB52LW5N

BDB52ABZC5N

BDB52MBK5N

BDB52BNK5N

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

E192641

LISTED

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m.,

EST, Friday.

Lowes.com/harborbreeze

Harbor Breeze® is a registered trademark

EB15397

2Lowes.com/harborbreeze

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, install or operate the

product.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

repairs, it must be shipped in its original packaging to ensure proper protection against damage

that might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to

the floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan is: 16.53 lbs.

Safety Information ...............................................................................................................

. 2

Package Contents ..............................................................................................................

. 4

Hardware Contents

...........................................................................................................................

Preparation ........................................................................................................................... 5

Initial Installation ................................................................................................................... 6

Downrod-Style Fan Mounting ............................................................................................... 7

Closemount-Style Fan Mounting ........................................................................................

.. 9

Wiring ...................................................................................................................................11

Final Installation .................................................................................................................. 12

Operating Instructions ......................................................................................................... 14

Care and Maintenance ...................................................................................................

.... 15

Troubleshooting .................................................................................................................. 15

Limited Lifetime Warranty ................................................................................................... 16

Replacement Parts List ....................................................................................................... 17

TABLE OF CONTENTS

SAFETY INFORMATION

Lowes.com/harborbreeze

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box

marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. (15.9 KG) OR LESS" and use

mounting screws provided with the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a

plastic outlet box. Secure the outlet box directly to the building structure. The outlet box and its

support must be able to support the moving weight of the fan (at least 35 lbs.).

To avoid personal injury, the use of gloves may be necessary while handling fan parts with

sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan

are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more than one house wire to connect to the

corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control

device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, do not bend the blade arms when

installing them, balancing the blades or cleaning the fan. Do not insert objects between the

rotating fan blades.

To reduce the risk of personal injury, use ONLY parts provided with this fan. The use of parts

OTHER than those provided with this fan will void the warranty.

Before installation, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

WARNING

DANGER

CAUTION

When using an existing outlet box, make sure the outlet box is securely attached to the building

structure and can support the full weight of the fan. Failure to do this can result in serious injury or

death. The stability of the outlet box is essential in minimizing wobble and noise in the fan after

installation is complete.

Be sure outlet box is properly grounded and that a ground wire (green or bare) is present.

Before beginning installation, carefully check all screws, bolts and nuts on fan motor assembly to

ensure they are secure.

PACKAGE CONTENTS

*US Pat. No. 7351037

PART DESCRIPTION QUANTITY

I Motor Screw 10

(preassembled)

J Blade Screw 15

(preassembled)

K Lock Washer 10

(preassembled)

L Canopy Mounting Screw 4

(preassembled)

M Pin (preassembled) 1

N Clip (preassembled) 1

PART DESCRIPTION QUANTITY

A Downrod 1

B Canopy 1

C Mounting Bracket 1

D Motor Housing 1

E* Plastic Locking Mechanism 5

F Blade 5

G Blade Arm 5

H Pull Chain Extension 1

Lowes.com/harborbreeze

IMPORTANT REMINDER: You must use the

parts provided with this fan for proper installation

and safety.

PREPARATION

Lowes.com/harborbreeze

E3 Wire

Connector

Qty. 4

HARDWARE CONTENTS (shown actual size)

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to install,

operate or assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Stepladder and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and

Wire Cutters

Turn off circuit breakers and wall switch to the fan

supply line leads.

DANGER: Failure to disconnect power supply

prior to installation may result in serious injury or

death.

3. Check to make sure blades (F) are at least 30 in.

from any obstruction and at least 7 ft. above the

floor.

INITIAL INSTALLATION

OFF

Lowes.com/harborbreeze

7 ft.

min.

30 in.

min.

Determine mounting method to use.

A. Downrod-style mount (standard or angled

ceiling)

B. Closemount-style (standard ceiling only)

IMPORTANT: If using the angle mount, check to

make sure the ceiling angle is not steeper than 19°.

*Helpful Hint: Downrod-style mounting is best

suited for ceilings 8 ft. or higher. For taller ceilings

you may want to use a longer downrod (not

included). Angle-style mounting is best suited for

angled or vaulted ceilings. A longer downrod is

sometimes necessary to ensure proper blade

clearance.

19° max.

INITIAL INSTALLATION

DOWNROD-STYLE FAN MOUNTING

1. Remove pin (M) and clip (N) from yoke at top of

motor housing (D) and partially loosen

preassembled set screws and nuts.

Lowes.com/harborbreeze

Secure mounting bracket (C) to outlet box (not

included) using screws, spring washers and flat

washers provided with the outlet box.

*NOTE:It is very important you use the proper

hardware when installing the mounting bracket

IMPORTANT: If using the angle mount, make

sure open end of mounting bracket (C) is

installed facing the higher point of the ceiling, and

ensure the ceiling angle is not steeper than 19°.

5. Remove motor screws (I) and lock washers (K)

from underside of motor housing (D). [If there are

plastic motor blocks installed with the motor

screws (I) and lock washers (K), discard the

plastic motor blocks.]

For DOWNROD-STYLE FAN MOUNTING,

proceed to step 1 below. For

CLOSEMOUNT-STYLE FAN MOUNTING, skip

to page 9.

Open End

ANGLE MOUNTSTANDARD MOUNT

Plastic Motor Block

Set

Screw

and Nut

Yoke

DOWNROD-STYLE FAN MOUNTING

Lowes.com/harborbreeze

Depending on the length of downrod you use,

you may need to cut the lead wires back to

simplify the wiring. If you decide to cut back the

lead wires, it is suggested you do so in the

following manner:

Take the lead wires and make sure you have

pulled them all the way through the top of the

downrod. Start at the TOP of the ball on the

downrod and measure 8 in. of lead wire, and

then cut the excess wire off with wire cutters (not

included).

NOTE: If you do not cut back the lead wires,

Steps 4 and 5 are not necessary and you may

proceed to Step 6 instead.

2. Insert downrod (A) through canopy (B). Thread

wires from motor housing (D) up through downrod

(A).

3. 3

Ball

Slip downrod (A) into yoke, align holes and

re-install pin (M) and clip (N). Tighten set screws

in yoke and then tighten nuts on the set screws.

Set Screw

and Nut

DOWNROD-STYLE FAN MOUNTING

If you decided to cut back the lead wires in

Step 4, strip 1/2 in. of insulation from end of

white wire. Twist stripped ends of each strand

of wire within the insulation with pliers (not

included). Repeat Step 5 for black, blue (if

applicable) and green wires.

Remove canopy cover from bottom of canopy (B).

[NOTE: It may be necessary to use the handle

end of a screwdriver (not included) to remove the

canopy cover by tapping on the canopy cover

from the inside of the canopy (B).]

NOTE: Closemount-style mounting is more

suitable for ceilings lower than 8 ft. high. The

downrod (A), canopy cover, pin and clip are not

used in this type of installation.

CLOSEMOUNT-STYLE FAN MOUNTING

Lowes.com/harborbreeze

Slot

Tab

Canopy

Cover

Install ball end of downrod (A) into opening of

mounting bracket (C). Align slot in ball with tab in

mounting bracket (C).

DANGER: Failure to align slot in ball with tab

may cause the fan to wobble or fall, which could

result in serious injury or death.

Continue to WIRING on page 11.

Pull wires up through hole in the middle of the

canopy (B) and attach canopy (B) to motor

housing (D) using the three screws and three lock

washers previously removed.

Temporarily hang fan on the tab on the mounting

bracket (C) using one of the non-slotted holes in

the canopy (B).

CLOSEMOUNT-STYLE FAN MOUNTING

Lowes.com/harborbreeze

Remove every other screw and lock washer from

top of motor housing (D).

Remove pin (M), clip (N) and preassembled set

screws and nuts from yoke on motor housing (D).

They are not needed for this installation type.

Tab

2a.

2b.

Yoke

Set Screw

and Nut

Andere Handbücher für CLASSIC STYLE BDB52LW5N

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze E-WCK44ABZ5LKS Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40837 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CHESHIRE II CSD52FBZ5C4S Bedienungsanleitung

Harbor Breeze

Harbor Breeze Calera Bedienungsanleitung

Harbor Breeze

Harbor Breeze PACIFIC GROVE 40101 Bedienungsanleitung

Harbor Breeze

Harbor Breeze LP8210LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze LANSING 40198 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40956 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40048 Bedienungsanleitung

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Bedienungsanleitung

Harbor Breeze

Harbor Breeze HTD21011 Bedienungsanleitung

Harbor Breeze

Harbor Breeze KEYPORT HUGGER 40141 Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAZON MZ44BNK3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze BDB52BNK5L Bedienungsanleitung

Harbor Breeze

Harbor Breeze 42299 Bedienungsanleitung

Harbor Breeze

Harbor Breeze Cape Coast E-YLM52WW5C1 Bedienungsanleitung

Harbor Breeze

Harbor Breeze TIEMPO E-TM52BNK5CS Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40105 Bedienungsanleitung

Harbor Breeze

Harbor Breeze LARALYN LRN32 Bedienungsanleitung

Harbor Breeze

Harbor Breeze MARINA COVE II Bedienungsanleitung

Harbor Breeze

Harbor Breeze BRADBURY BRD48BNK6LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze RLG52NWZ5L Bedienungsanleitung

Harbor Breeze

Harbor Breeze 00892 Bedienungsanleitung

Harbor Breeze

Harbor Breeze BRISTLE AR13-44BLK AR13-44BN Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung