Harbor Breeze BATTLER E-LUK52HBB5LEDR Bedienungsanleitung

ITEM #0206739

BATTLER CEILING FAN

MODEL #E-LUK52HBB5LEDR

Español p. 20

3170356

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our

customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday -

Thursday, 8 a.m. - 5 p.m., EST, Friday.

Lowes.com/harborbreeze

EB12185

Harbor Breeze® is a registered trademark of

Safety Information ....................................................................................................................... 2

Package Contents ....................................................................................................................... 4

Hardware Contents ..................................................................................................................... 5

Preparation ................................................................................................................................. 5

Initial Installation ......................................................................................................................... 6

Fan Mounting .............................................................................................................................. 7

Wiring ......................................................................................................................................... 9

Final Installation ..........................................................................................................................11

Automated Learning Process/Activating Code ...........................................................................14

Operating Instructions for Remote Control and Fan ...................................................................15

Care and Maintenance ...............................................................................................................17

Troubleshooting ..........................................................................................................................17

Warranty .....................................................................................................................................18

Replacement Parts List ..............................................................................................................19

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, install or operate the

product.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

repairs, it must be shipped in its original packaging to ensure proper protection against damage that

might exceed the initial cause for return.

• Make sure that all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring

handbook, available at Lowe's, if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to

the floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure that all connections are secure to prevent the fan from falling.

• The net weight of this fan including the light kit is: 22 lbs. (10 kg).

TABLE OF CONTENTS

Lowes.com/harborbreeze

SAFETY INFORMATION

To reduce the risk of fire, electrical shock, or personal injury, mount fan to outlet box

marked "ACCEPTABLE FOR FAN SUPPORT OF 15.9 KG (35 LBS.) OR LESS" and use

mounting screws provided with the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box. Secure the outlet

box directly to the building structure. The outlet box and its support must be able to support the

moving weight of the fan (at least 35 lbs.). Do NOT use a plastic outlet box.

To avoid personal injury, the use of gloves may be necessary while handling fan parts with

sharp edges.

To reduce the risk of fire, electrical shock, or personal injury, wire connectors provided with this

fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more than one house wire to connect to the

corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed

control device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock, or personal injury, do not bend the blade arms when

installing them, balancing the blades, or cleaning the fan. Do not insert objects between the

rotating fan blades.

To reduce the risk of personal injury, use only parts provided with this fan. The use of parts

OTHER than those provided with this fan will void the warranty.

WARNINGS

CAUTIONS

Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

Read all instructions and safety information before installing your new fan. Review the

accompanying assembly diagrams.

CAUTION - Risk of Fire and Electric Shock: Do Not Repair or Service This Light Kit. The light

source is designed for this specific application and can overheat if serviced by untrained personnel.

If any servicing is required, call 1-800-527-1292 for return authorization and shipping instructions.

Lowes.com/harborbreeze

IMPORTANT REMINDER: You must use the

parts provided with this fan for proper installation

and safety.

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

Canopy Mounting Screw

(preassembled)

Glass Shade

Shade Fitter

Remote Control

Transmitter

P 12-volt Battery

Q Fitter Plate Screw

(preassembled)

Shade Fitter Screw

(preassembled)

PART DESCRIPTION QUANTITY

Downrod 1

Canopy

Mounting Bracket

Yoke Cover

Motor Housing

Blade Arm

Blade

Light Kit

Canopy Cover

Pin (preassembled)

Clip (preassembled)

12V Size A23

4Lowes.com/harborbreeze

HARDWARE CONTENTS (shown actual size)

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Stepladder and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself-Wiring Handbook and

Wire Cutters

DANGER: When using an existing outlet box, make sure the outlet box is securely attached to

the building structure and can support the full weight of the fan. Failure to do this can result in serious

injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan

after installation is complete.

CAUTION: Be sure outlet box is properly grounded and that a ground wire (green or bare) is

present.

After opening top of carton, remove mounting hardware package from foam inserts. Remove motor

from packing and place on carpet or on foam to avoid damage to ﬁnish.

CAUTION: Carefully check all screws, bolts and nuts on fan motor assembly to ensure that they

are secured.

PREPARATION

Fiber

Blade

Washer

Qty. 15

+ 1 extra

BB CC

Blade

Screw

Qty. 15

+ 1 extra

E3 Wire

Connector

Qty. 4

DD EE

Motor

Screw

Qty. 10

+ 1 extra

Lock

Washer

Qty. 10

+ 1 extra

5Lowes.com/harborbreeze

INITIAL INSTALLATION

Turn off circuit breakers and wall switch to the fan

supply line leads.

DANGER: Failure to disconnect power supply

prior to installation may result in serious injury or

death.

Determine mounting method to use.

A. Normal mount

B. Angle mount

IMPORTANT: If using the angle mount, check to

make sure the ceiling angle is not steeper than 19°.

Check to make sure blades (G) are at least 30 in.

from any obstruction. Check downrod (A) length to

ensure blades (G) are at least 7 ft. above the floor.

OFF

6Lowes.com/harborbreeze

7 ft.

min.

30 in.

min.

Secure mounting bracket (C) to outlet box (not

included) using screws, spring washers, and flat

washers provided with the outlet box.

*NOTE: It is very important that you use the proper

hardware when installing the mounting bracket (C)

as this will support the fan.

IMPORTANT: If using the angle mount, make sure

open end of mounting bracket (C) is installed

facing the higher point of the ceiling.

5. Remove five screws and lock washers from

underside of motor in order to remove motor

stabilization plate. Motor stabilization plate may be

discarded.

FAN MOUNTING

INITIAL INSTALLATION

Remove pin (J) and clip (K) from motor housing

yoke at top of motor housing (E) and partially

loosen preassembled set screws.

*Helpful Hint: Downrod-style mounting is best

suited for ceilings 8 ft. (2.44 m) high or higher. For

taller ceilings you may want to use a longer

downrod (not included) than the one provided.

Angle style mounting is best suited for angled or

vaulted ceilings. A longer downrod is sometimes

necessary to ensure proper blade clearance.

Set

Screw

motor

stabilization

plate

7Lowes.com/harborbreeze

FAN MOUNTING

Depending on the length of downrod (A) you

use, you may need to cut the lead wires back to

simplify the wiring. If you decide to cut back the

lead wires, it is suggested that you do so in the

following manner:

Take the lead wires and make sure that you

have pulled them all the way through the top of

the downrod (A). Start at the TOP of the ball on

the downrod (A) and measure 8 in. of lead wire,

and then cut the excess wire off with wire

cutters.

NOTE: If you do not cut back the lead wires,

Steps 4 and 5 are not necessary and you may

proceed to Step 6 instead.

2. Insert downrod (A) through canopy (B), canopy

cover (I) and yoke cover (D). [NOTE: Canopy

cover (I) must be turned with the shiny side

toward the motor housing (E).] Thread wires

from motor housing (E) through downrod (A).

3. Slip downrod (A) into housing yoke, align holes

and re-install pin (J) and clip (K). Tighten

downrod (A) set screws and then tighten nuts.

Slide yoke cover (D) down until it rests on top of

motor housing (E).

Set

Screw

Ball

8Lowes.com/harborbreeze

If you decided to cut back the lead wires in Step 4,

strip a 1/2 in. of insulation from end of white wire.

Twist stripped ends of each strand of wire within

the insulation with pliers. Repeat Step 5 for black,

blue (if applicable) and green wires.

FAN MOUNTING

Install ball end of downrod (A) into mounting

bracket (C) opening. Align slot in ball with tab in

mounting bracket (C).

DANGER: Failure to align slot in ball with tab

may result in serious injury or death.

WARNING: To reduce the risk of fire, electrical

shock, or personal injury, wire connectors provided with

this fan are designed to accept only one 12-gauge

house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more

than one house wire to connect to the corresponding

fan lead wires, consult an electrician for the proper size

wire connectors to use.

CAUTION: Be sure outlet box is properly grounded

and that a ground (green or bare) wire is present.

WARNING: If house wires are different colors than

referred to in the following steps, stop immediately. A

professional electrician is recommended to determine

wiring.

WIRING

Hanging

Ball Slot

Tab

9Lowes.com/harborbreeze

NOTE: Black wire is hot power for fan. White

wire is common for fan and light kit. Green or

bare wire is ground.

Wrap electrical tape (not included) around each

individual wire connector (CC) down to the wire.

WARNING: Make sure no bare wire or wire

strands are visible after making connections. Place

green and white connections on opposite side of

box from the black connections.

Turn spliced/taped wires upward and gently push

wires and wire connectors (CC) into outlet box.

Dimmer

Switch Speed

Switch

For illustrative purposes only--not

intended to cover all types of controls

IMPORTANT: Using a full range dimmer switch to

control fan speed will cause a loud humming noise

from fan. To reduce the risk of fire or electrical shock,

do NOT use a full range dimmer switch to control fan

speed.

WIRING

[NOTE: For each wire connection below, and use

one of the wire connectors (CC), making sure to

screw wire connector (CC) on in a clockwise

direction.]

Connect BLACK wire from fan to BLACK wire

from ceiling. Connect WHITE wire from fan to

WHITE wire from ceiling. Connect all GROUND

(GREEN) wires together from fan (on downrod and

mounting bracket) to BARE/GREEN wire from

ceiling.

CC CC

BLACK

WHITE

GROUND/GREEN (BARE)

WHITE

FROM FAN

120 V Power

FROM

CEILING

FAN

GREEN

BLACK

GREEN

10 Lowes.com/harborbreeze

CC CC

Hardware Used

E3 Wire Connector x4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze BTH44ABZC5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze HTD20005 Bedienungsanleitung

Harbor Breeze

Harbor Breeze JP18EB3 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 42612 Bedienungsanleitung

Harbor Breeze

Harbor Breeze TEX52MBK5C1L Bedienungsanleitung

Harbor Breeze

Harbor Breeze CGR60WW3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze BRISTLE AR13-44BLK AR13-44BN Bedienungsanleitung

Harbor Breeze

Harbor Breeze BELLHAVEN II E-BLHII52VPW5C4S Bedienungsanleitung

Harbor Breeze

Harbor Breeze MERRIMACK 40942 Handbuch

Harbor Breeze

Harbor Breeze 40105 Bedienungsanleitung

Harbor Breeze

Harbor Breeze MERRIMACK II 41125 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 00883 Bedienungsanleitung

Harbor Breeze

Harbor Breeze KITSILANO Bedienungsanleitung

Harbor Breeze

Harbor Breeze 41161 Bedienungsanleitung

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Bedienungsanleitung

Harbor Breeze

Harbor Breeze LAKE PLACIDO CPK1261 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 41239 Bedienungsanleitung

Harbor Breeze

Harbor Breeze Santa Ana LP8294LBN Bedienungsanleitung

Harbor Breeze

Harbor Breeze 80209 Bedienungsanleitung

Harbor Breeze

Harbor Breeze POINT BREAK Merkblatt

Harbor Breeze

Harbor Breeze 40837 Bedienungsanleitung

Harbor Breeze

Harbor Breeze LYNSTEAD Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAZON MZ44MBLK3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze TG52BNK3D1RC Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung