Harbor Breeze TIEMPO E-TM52BNK5CS Bedienungsanleitung

E192641

ITEM #0125453

0125500

TIEMPO CEILING FAN

Español p. 19

MODEL #E-TM52BNK5CS

E-TM52BNKB5CS

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

Lowes.com/harborbreeze

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m.,

EST, Friday.

EB14350

Federal regulations require ceiling fans with light kits manufactured or imported after

January 1, 2009, to limit total wattage consumed by the light kit to 190W. Therefore,

this fan is equipped with a wattage limiting device.

Harbor Breeze® is a registered trademark

Lowes.com/harborbreeze

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, install or operate the

product.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

repairs, it must be shipped in its original packaging to ensure proper protection against damage

that might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to

the floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan including the light kit is: 24.45 lbs.

Safety Information ................................................................................................................2

Package Contents ................................................................................................................4

Hardware Contents

...........................................................................................................................

Preparation ...........................................................................................................................5

Initial Installation ...................................................................................................................6

Fan Mounting ...................................................................................................................... 7

Wiring .................................................................................................................................10

Final Installation .................................................................................................................12

Operating Instructions ........................................................................................................14

Care and Maintenance .......................................................................................................16

Troubleshooting...................................................................................................................16

Limited Lifetime Warranty ...................................................................................................17

Replacement Parts List ......................................................................................................18

TABLE OF CONTENTS

SAFETY INFORMATION

To reduce the risk of fire, electrical shock, or personal injury, mount fan to outlet box

marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. (15.9 KG) OR LESS" and use

mounting screws provided with the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box. Secure the outlet

box directly to the building structure. The outlet box and its support must be able to support the

moving weight of the fan (at least 35 lbs.). Do NOT use a plastic outlet box.

To avoid personal injury, the use of gloves may be necessary while handling fan parts with

sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan

are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more than one house wire to connect to the

corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock do not use the fan with any solid state speed

control device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, do not bend the blade arms when

installing them, balancing the blades or cleaning the fan. Do not insert objects between the

rotating fan blades.

To reduce the risk of personal injury, use only parts provided with this fan. The use of parts

OTHER than those provided with this fan will void the warranty.

WARNING

CAUTION

Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

Read all instructions and safety information before installing your new fan. Review the

accompanying assembly diagrams.

3Lowes.com/harborbreeze

PACKAGE CONTENTS

Lowes.com/harborbreeze

DESCRIPTIONPART QUANTITY

IMPORTANT REMINDER: You must use the

parts provided with this fan for proper installation

and safety.

A Mounting Bracket 1

B Canopy 1

C Blade Arm 5

D Blade 5

E Motor Screw 10

(preassembled) + 1 extra

F Lock Washer 10

(preassembled) + 1 extra

G Yoke Cover 1

H Pull Chain Extension 2

DESCRIPTIONPART

I Glass Shade 4

J Motor Housing 1

K Canopy Mounting Screw 4

(preassembled)

L Bulb 4

M Switch Housing Plate 1

N Light Kit Fitter 1

O Downrod 1

P Pin (preassembled) 1

Q Clip (preassembled) 1

R Canopy Cover 1

QUANTITY

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware cantents list. If any part is missing or damaged, do not attempt

to assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Stepladder and Wire Strippers.

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and

Wire Cutters.

DANGER: When using an existing outlet box, make sure the outlet box is securely attached to

the building structure and can support the full weight of the fan. Failure to do this can result in serious

injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan

after installation is complete.

CAUTION: Be sure outlet box is properly grounded and that a ground wire (green or bare) is

present.

After opening top of carton, remove mounting hardware package from foam inserts. Remove motor

from packing and place on carpet or on foam to avoid damage to ﬁnish.

CAUTION: Carefully check all screws, bolts and nuts on fan motor assembly to ensure they are

secured.

PREPARATION

Lowes.com/harborbreeze

E3 Wire

Connector

Qty. 4

AA BB CC

HARDWARE CONTENTS (shown actual size)

Blade

Screw

Qty. 15

+ 1 extra

Blade

Washer

Qty. 15

+ 1 extra

Turn off circuit breakers and wall switch to the fan

supply line leads.

DANGER: Failure to disconnect power supply

prior to installation may result in serious injury or

death.

3. Check to make sure blades (D) are at least 30 in.

from any obstruction and at least 7 ft. above the

floor.

INITIAL INSTALLATION

OFF

Lowes.com/harborbreeze

7 ft.

min.

30 in.

min.

Determine mounting method to use.

A. Standard mount

B. Angle mount

IMPORTANT:If using the angle mount, ensure the

ceiling angle is not steeper than 19°.

*Helpful Hint: Downrod-style mounting is best

suited for ceilings 8 ft. high or higher. For taller

ceilings you may want to use a longer downrod

(not included). Angle-style mounting is best suited

for angled or vaulted ceilings. A longer downrod is

sometimes necessary to ensure proper blade

clearance. B

Remove motor screws (E) and lock washers (F)

from underside of motor housing (J). Save motor

screws (E) and lock washers (F) for blade arm (C)

attachment later on.

Remove pin (P) and clip (Q) from motor housing

yoke at top of motor housing (J) and partially loosen

preassembled set screws.

Secure mounting bracket (A) to outlet box (not

included) using screws, spring washers, and flat

washers provided with the outlet box.

*NOTE: It is very important that you use the

proper hardware when installing the mounting

bracket (A) as this will support the fan.

IMPORTANT: If using the angle mount, make

sure open end of mounting bracket (A) is installed

facing the higher point of the ceiling.

4. 4

INITIAL INSTALLATION

FAN MOUNTING

Lowes.com/harborbreeze

Set

Screw

Slip downrod (O) into motor housing yoke, align

holes and re-install pin (P) and clip (Q).Tighten

set screws in motor housing yoke and then

tighten pre-assembled nuts on the set screws.

Slide yoke cover (G) down until it rests on top

of motor housing (J).

Ball

FAN MOUNTING

Depending on the length of downrod you use,

you may need to cut the lead wires back to

simplify the wiring. If you decide to cut back the

lead wires, it is suggested you do so in the

following manner:

Take the lead wires and make sure you have

pulled them all the way through the top of the

downrod. Start at the TOP of the ball on the

downrod and measure 8 in. of lead wire, and

then cut the excess wire off with wire cutters (not

included).

NOTE: If you do not cut back the lead wires,

Steps 4 and 5 are not necessary and you may

proceed to Step 6 instead.

2. Insert downrod (O) through canopy (B), canopy

cover (R) and yoke cover (G). [NOTE: Canopy

cover (R) must be turned with the shiny side

toward the motor housing (J).] Thread wires

from motor housing (J) through downrod (O).

Lowes.com/harborbreeze

Set

Screw

9Lowes.com/harborbreeze

If you decided to cut back the lead wires in Step 4,

strip 1/2 in. of insulation from end of white wire.

Twist stripped ends of each strand of wire within

the insulation with pliers (not included). Repeat

Step 5 for black, blue (if applicable) and green

wires.

5. 5

FAN MOUNTING

Install ball end of downrod (O) into opening of

mounting bracket (A). Align slot in ball with tab in

mounting bracket (A).

DANGER: Failure to align slot in ball with tab

may result in serious injury or death.

Hanging

Ball Slot

Tab

10 Lowes.com/harborbreeze

Choose wiring diagram (Fig. 1a, Fig. 1b or Fig. 1c)

that fits your situation and make appropriate wiring

connections as follows: [IMPORTANT: For each

wire connection below, use one of the wire

connectors (CC) provided, making sure to screw

wire connector (CC) on in a clockwise direction.]

1a. FAN AND LIGHT CONTROLLED BY PULL

CHAINS: Connect BLACK and BLUE wire from

fan to BLACK wire from ceiling. Connect WHITE

wire from fan to WHITE wire from ceiling.

Connect GREEN wire from fan (on mounting

bracket (A) and downrod (O)) to BARE/GREEN

wire from ceiling.

WIRING

1b. FAN CONTROLLED BY PULL CHAIN,

LIGHT BY WALL SWITCH: If you intend to

control the fan light with a separate wall switch,

connect BLACK wire from fan to BLACK wire

from ceiling. Connect BLUE wire from fan to the

BLACK (or RED) wire from the independent

wall switch for the light. Connect WHITE wire

from fan to WHITE wire from ceiling. Connect

GREEN wire from fan (on mounting bracket (A)

and downrod (O)) to BARE/GREEN wire from

ceiling.

WARNING: To reduce the risk of fire, electrical shock, or personal injury, wire connectors

provided with this fan are designed to accept only one 12-gauge house wire and two lead

wires from the fan. If your house wire is larger than 12-gauge or there is more than one house

wire to connect to the two fan lead wires, consult an electrician for the proper size wire

connectors to use.

CAUTION: Be sure outlet box is properly grounded and that a ground (green or bare) wire is

present.

WARNING: If house wires are different colors than referred to in the following steps, stop

immediately. A professional electrician is recommended to determine wiring.

WHITE

BLACK

GROUND/GREEN (BARE)

BLACK

WHITE

GREEN

FAN AND LIGHT CONTROLLED BY PULL CHAINS

120V POWER

FROM CEILING

BLUE

WHITE

BLACK

BLACK (WALL SWITCH)

GROUND/GREEN (BARE)

BLACK

BLUE

WHITE

GREEN

FAN CONTROLLED BY PULL CHAIN, LIGHT BY WALL SWITCH

120V POWER

FROM CEILING

NOTE: This fan is remote control adaptable (remote control not included).

Andere Handbücher für TIEMPO E-TM52BNK5CS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze SAWGRASS Bedienungsanleitung

Harbor Breeze

Harbor Breeze 873 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40093 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CENTREVILLE 40117 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40410 Bedienungsanleitung

Harbor Breeze

Harbor Breeze LARALYN LRN32 Bedienungsanleitung

Harbor Breeze

Harbor Breeze MERRIMACK 40942 Handbuch

Harbor Breeze

Harbor Breeze 00880 Bedienungsanleitung

Harbor Breeze

Harbor Breeze LP8071LBN Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40105 Bedienungsanleitung

Harbor Breeze

Harbor Breeze L0982 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 872 Bedienungsanleitung

Harbor Breeze

Harbor Breeze FWH60BNK3LRS Bedienungsanleitung

Harbor Breeze

Harbor Breeze ANIVA BAY Bedienungsanleitung

Harbor Breeze

Harbor Breeze CLASSIC STYLE 00819 Bedienungsanleitung

Harbor Breeze

Harbor Breeze JP18EB3 Bedienungsanleitung

Harbor Breeze

Harbor Breeze FLANAGAN II 42477 Bedienungsanleitung

Harbor Breeze

Harbor Breeze Casual-3-2011 Bedienungsanleitung

Harbor Breeze

Harbor Breeze COGDELL COG60BNK7LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze C-BTH44ABZC5L Bedienungsanleitung

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40094 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 35063 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 0184428 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung