Harman Kardon AVR 1600 Kurzanleitung

HARMAN KARDON®AVR 1600

SOFTWARE UPGRADE INSTRUCTIONS

Harman Kardon is pleased to offer this product upgrade, which improves

the performance of your AVR and addresses software issues. Unlike many

consumer products, which are designed with “fixed” memory, the AVR

1600 features flash memory that is upgradable by loading the new software

on a standard USB memory stick and placing it in the front-panel jack.

This software package addresses an incompatibility that may occur when the

AVR 1600 is connected to devices such as satellite receivers, video game

consoles or other set top boxes via HDMITM connectivity. Even if you have not

encountered this issue, we recommend that you install the new software to take

advantage of other additional minor performance improvements in this new

software package.

Important Note

This software is specially designed for use with Harman Kardon AVR 1600

receiver. Use with any other models or brands may cause damage to the

product. DO NOT USE THIS SOFTWARE WITH ANY OTHER PRODUCTS.

*WARNING* NOTE: This upgrade is for products used in North America or

countries with 120-volt AC current. If you live in Europe or any part of the world

with 230-volt AC current do not install this upgrade. Installing the incorrect

software may cause problems with your receiver that are not covered by

the unit's warranty.

Please note that depending on when your AVR was manufactured, it may have

already had the latest software installed at the factory. To see if its software

requires an upgrade, please follow these steps:

oWith the AVR turned on, press the AVR button, and then press 1-2-3-4-

OK on the remote control.

oIf the top line of the display reads V1.1 and the bottom line reads 17-03-

2009 02, you have the correct version and no further action is needed.

oIf the display shows any other readout, please proceed with the upgrade.

System Requirements

To install the software upgrade, you will need a USB memory stick with at least

400 Mb of available storage capacity. We recommend that there be no other files

on the memory device, but if it contains any existing files, please check to make

certain that none of them have the file extension of “.bin” as the last three letters

of the file name. Any such files on the memory device must either be removed or

saved to a separate folder on the memory stick. The presence of any other

files with a “.bin” extension in the main “root” directory of the memory

stick may cause the update process to fail and may possibly cause damage

to your AVR that is not covered by the warranty.

Installation Instructions

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE PROCEEDING.

Upgrading your receiver is easy, but for the upgrade to work properly, it is

important to precisely follow the instructions below. The upgrade will take less

than 15 minutes, and once it begins you must complete the entire process in one

session. Please allow sufficient time to run through all the steps. If you wish to

have a printed copy of these instructions available to follow as you install the

software, click on the included instructions pdf in the zip file you downloaded and

save a copy to your computer for printout.

Installing the new software will erase all information in your AVR’s system

memory, which means that any configuration settings or tuner presets that you

have entered will be lost. To make it easier to reestablish the settings after

completing the upgrade, you may wish to write down your current system

configurations using the worksheets that are printed in the unit’s Owner’s

Manual, or you may use the blank worksheets included as AVR1600_Setting

Worksheets.pdf. Note that Acrobat®Reader®software is required to open the

worksheet files.

Unzip the file that you downloaded called AVR1600_Software_Upgrade.zip.

Inside the zip file you will find 3 files: AVR1600-V1.1.bin, AVR1600_Setting

Worksheets.pdf, and AVR 1600 V1.1 Upgrade Instructions.pdf.

Plug the memory stick into your computer and wait for the device to be

recognized by the operating system, if necessary.

Next load the AVR1600-V1.1.bin file to your USB stick.

When the file transfer to your USB stick is complete, follow the steps appropriate

to your specific computer and operating system to safely remove the USB stick

from your computer. Then, proceed as follows:

Take the USB stick to your AVR and plug it into the jack on the front

panel. If the front-panel covers are installed, simply press on the side of

the longer cover (on the right side of the front panel) to remove it.

Make sure your AVR is turned on, and that the input is NOT the tuner. We

recommend you press the DVD button before proceeding.

Press the AVR button on the remote and then press 1,7,1,8, and then OK

on the remote.

The front-panel display will read.

SYSTEM UPDATE

EXIT/CONTINUE

Press the OK button to continue. The front panel display will show

Searching as the system looks for the correct file on the USB drive.

When the file with the update information is located, the display will read

SYSTEM UPDATE

EXIT/CONTINUE

Press the OK button on the remote, and the following will happen

automatically:

oThe front panel display will go dark.

oThe volume indicator will also go dark and will then blink to indicate

that the new software is being installed.

oAfter a few minutes, the AVR will briefly go into the Standby mode

as indicated by the Power indicator turning from white to amber.

oThe unit will turn back on, indicating that the software has been

installed.

Once the unit turns on, check to make certain that the new software has

been installed by following these steps:

oPress the DVD source button and then press the AVR button.

oPress 1-2-3-4-OK on the remote control to display the version

number and check to make sure it matches the information shown

below to make certain that your unit is now loaded with the proper

software. If a different number appears, please repeat the upgrade

process.

V1.1 M

17-03-2009 02 U

After a brief pause, the display will show the following information:

DSP VERSION

1.1.1

oYou may wish to write this upgrade information in your owner’s

manual so that you’ll have it available for reference. When new

software is made available through www.harmankardon.com, it will

show the number of the latest version. You will need this

information to see if an additional upgrade is required.

Your new software is now installed. Before your first listening session, all that

remains is to re-enter any input and speaker configuration information and any

tuner presets you wish to use. For optimal performance, we also recommend that

you run EzSet/EQTM room optimization to reset the settings for speaker distance,

output levels and to tune the AVR to the unique characteristics of your listening

room. If you prefer not to use EzSet/EQ room optimization, it is important that the

settings for speaker configuration, speaker distance and speaker levels be

entered manually.

CONGRATULATIONS! With the completion of the upgrade process, your

Harman Kardon AVR is now not only as good as new – it will perform even better

than it did when you first bought it. We wish you many years of happy listening!

Andere Handbücher für AVR 1600

Inhaltsverzeichnis

Andere Harman Kardon Empfänger Handbücher

Harman Kardon

Harman Kardon AVR 220 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 325 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 435 Bedienungsanleitung

Harman Kardon

Harman Kardon 800+ Bedienungsanleitung

Harman Kardon

Harman Kardon HK450 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 354 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 230 Bedienungsanleitung

Harman Kardon

Harman Kardon HK 670 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 145 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 7500 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 230 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 70/230 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 30 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 7500 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 7500 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 700 Bedienungsanleitung

Harman Kardon

Harman Kardon HK 3250 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR1550 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 1500 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 630 Bedienungsanleitung

Harman Kardon

Harman Kardon STEREO RECITAL TA224 Bedienungs- und Wartungshandbuch

Harman Kardon

Harman Kardon AVR 340 Bedienungsanleitung

Harman Kardon

Harman Kardon AVR20 II Bedienungsanleitung

Harman Kardon

Harman Kardon AVR 146 Anleitungen und Rezepte

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung